An improved method for constructing a full-length enriched cDNA library using small amounts of total RNA as a starting material

We have developed an improved method for constructing a full-length cDNA library using small quantity of material by modifying the original oligo-capping method. In our devised method, total RNAs are used in sequential oligo-capping steps directly without preliminary mRNA purification. Using this method, we constructed full- length cDNA libraries from 100 mg of total RNA. These libraries contained 8x10(5) to 8x10(6) independent clones with average insert sizes of 2.0 kb. Moreover, the number of full-length cDNAs containing the translation initiation codon ATG in the constructed libraries was estimated to 60-70%. In addition, 54% of the known cDNAs had a longer 5' end than the corresponding genes in the public database. Our results show that the method can be effectively used to construct full-length enriched cDNA libraries, especially, if starting material is limited.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

Modeling of the Permeate Flux during Microfiltration of BSA-Adsorbed Microspheres in a Stirred Cell

A study on the variation of the permeate flux was performed in a stirred cell charged with microspheres, to investigate the effects of the stirrer speeds (300, 400, and 600 rpm) and the BSA concentration (0.1, 0.2, 0.4, and 0.8 g/L) under constant pressure. The permeate flux increased over time before the saturation point, but it began to decrease after that point. An increase of the BSA concentration and the stirrer speed resulted in the rapid increase of the permeate flux. This is contrary to the observation of the conventional filtration experiments using a stirred cell. A resistance-in-series model was employed for the modeling of the permeate flux. The cake resistance (R(c), induced by the concentration polarization of microspheres) and the fouling resistance (R(f), induced by the adsorption of BSA inside the membrane pore) must be considered simultaneously for the modeling. These modeling results were in good agreement with the experimental data. These can be applied to the special system considering both R(c) and R(f) as well as the general filtration systems using a stirred cell. Copyright 2000 Academic Press.     

Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.     

Sphingosine mediates FTY720-induced apoptosis in LLC-PK1 cells

FTY720, a synthetic sphingoid base analog, was examined as a new sphingosine kinase inhibitor, which converts endogenous sphingosine into its phosphate form. With 20 microM of FTY720, sphingosine accumulated in the LLC-PK(1) cells in a time- and dose-dependent manner. The FTY720 treated cells showed a high concentration of fragmented DNA, a high caspase-3 like activity and TUNEL staining cells. It was also found that the sphingosine and sphinganine level increased in a time- and dose-dependent manner within 12 h after the FTY720 treatment. The sphingosine kinase activity was reduced by FTY720 as much as other sphingosine kinase inhibitors, N, N-dimethylsphingosine (DMS), dl-threo-dihydrosphingosine (DHS). The fragmented DNA content as a result of the 20 microM of FTY720 treatment and by 5 microM of the exogenously added BSA-sphingosine complex indicated typical apoptosis. Under similar conditions, the accumulated sphingosine concentration in all the cells was almost identical even though the sphingosine distribution inside the cells was somewhat different. These results indicate that the FTY720 induced apoptosis is associated with the inhibition of the sphingosine kinase activity and is strongly associated with the successive accumulation of sphingosine.     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

A facile synthesis of polypyrrole nanotubes using a template-mediated vapor deposition polymerization and the conversion to carbon nanotubes

Polypyrrole (PPy) nanotubes with highly uniform surface and tunable wall thickness were fabricated by one-step vapor deposition polymerization (VDP) using anodic aluminium oxide (AAO) template membranes, and transformed into carbon nanotubes through a carbonization process.     

Electrochemically generated super-hydrophilic surfaces

The control of surface wettability of indium tin oxide (In2O3-SnO2) coated glass surfaces is studied. We report here the first observation of purely electrochemical generation of super-hydrophilic surfaces at In2O3-SnO2 electrodes in the absence of an ultraviolet illumination source. This is achieved by the application of high anodic potentials for a prolonged period. Such surfaces are reversibly converted back to their original hydrophobic state on storage in air (one or two days) or water (a week)(and vice versa). The unique character of these surfaces can be attributed to the surface structure of the hydrophilic phase.     

Amino acid recognition of pyridine bis(oxazoline)-copper(II) complex in aqueous solvent

Enantioselective recognition of amino acids has been studied with C₂-symmetric chiral pyridine bis(oxazoline)-copper(II) complexes at physiological pH condition. UV-visible titration revealed strong binding of submillimolar dissociation constant between pyridine bis(oxazoline)-copper(II) complex and amino acids in aqueous solution. Moderate selectivity of up to 2:1 between d- and l-amino acids was achieved. The enantiomers were baseline resolved by capillary electrophoresis, using the bis(l-lysine)-copper(II) complex as a chiral selector.     

Electron paramagnetic resonance study of partially oriented clay platelets intercalated with copper(II) 1,4,8,11-tetraazacyclotetradecane

Electron paramagnetic resonance (EPR) spectra of powder and oriented films of montmorillonite, hectorite, and saponite intercalated with [Cu(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) exhibit three components: an orientation-dependent component without hyperfine features, an orientation-dependent component with hyperfine features, and an orientation-independent component without hyperfine feature. EPR spectra of [Cu(cyclam)](2+)-saponite, which exhibit only two components and the best resolved hyperfine features, were simulated. The spectra indicate that a large portion of the saponite platelets are inclined to the glass surface, although they tend to align with their basal planes parallel to the glass surface. The orientation-dependent spectra could be simulated by introducing a Gaussian distribution with a standard deviation of 20 degrees for the inclination angle. The standard deviation may be used as a disorder parameter for the microcrystals assembled on glass plates. Spectral simulation also shows that the CuN(4) plane of [Cu(cyclam)](2+) is parallel to the clay layers. EPR spectra of some other partially oriented systems are also discussed.