Self-assembling structures of long-chain phenyl glucoside influenced by the introduction of double bonds

Four long-chain phenyl glucoside amphiphiles possessing a saturated or unsaturated long alkyl chain group as the self-assembling unit of a highly organized molecular architecture were synthesized. Their self-assembling properties were investigated by EF-TEM, SEM, CD, FT-IR, and XRD. Compound 2 possessing one double bond in the lipophilic portion showed twisted helical fibers, which formed a bilayered structure with a 3.59 nm period, while compound 3 showed the helical ribbons and left-handed nanotubular structures with 150-200 nm inner diameters and ca. 20 nm of wall. Very interestingly, compound 4 possessing three double bonds showed a nanotubular structure with ca. 70 nm of inner diameter through a helical ribbon, which formed a loose bilayered structure with 4.62 nm. These results indicate that self-assembling properties strongly depend on the number of cis double bonds.     

Ultrafast energy-electron transfer cascade in a multichromophoric light-harvesting molecular square

A molecular square with dimensions of about 4 nm, incorporating sixteen pyrene chromophores attached to four ditopic bay-functionalized perylene bisimide chromophores, has been synthesized by coordination to four Pt(II) phosphine corner units and fully characterized via NMR spectroscopy and ESI-FTICR mass spectrometry. Steady-state and time-resolved emission as well as femtosecond transient absorption studies reveal the presence of a highly efficient (>90%) and fast photoinduced energy transfer (k(en) approximately equal to 5.0 x 10(9) s(-1)) from the pyrene to the perylene bisimide chromophores and a very fast and efficient electron transfer (>94%, k(et) approximately equal to 5 x 10(11) up to 43 x 10(11) s(-1)). Spectrotemporal parametrization indicates upper excited-state electron-transfer processes, various energy and electron-transfer pathways, and chromophoric heterogeneity. Temperature-dependent time-resolved emission spectroscopy has shown that the acceptor emission lifetime increases with decreasing temperature from which an electron-transfer barrier is obtained. The extremely fast electron-transfer processes (substantially faster and more efficient than in the free ligand) that are normally only observed in solid materials, together with the closely packed structure of 20 chromophoric units, indicate that we can consider the molecular square as a monodisperse nanoaggregate: a molecularly defined ensemble of chromophores that partly behaves like a solid material.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

Base-catalyzed hydrolysis of 6-aminopenicillanic acid. The kinetic and thermodynamic products

In the presence of sodium hydroxide or a β-lactamase, 6-APA has been shown to hydrolyze rapidly at room temperature to penicic acid 3 , the kinetic product of the reaction. In a subsequent equilibration 3 isomerizes at C-5, by way of intermediate imine 4 , affording 5-epi-penicic acid 6 as the major hydrolysis product (～ 95% at equilibrium). The pH and temperature parameters of equilibration are discussed and HPLC, optical rotation, proton nmr and ¹³C nmr data are presented.     

Micropatterning of semicrystalline poly(vinylidene fluoride) (PVDF) solutions

Micropatterning of a semicrystalline poly(vinylidene fluoride) (PVDF) solution was performed by a temperature controlled capillary micromolding where the rate of solvent evaporation was controlled by substrate temperature. In order to choose proper solvents for micropatterning, we have investigated the solubility of PVDF in various organic solvents and crystal structures of the PVDF bulk films cast from the solvents. The films prepared from the polar solvents such as dimethylformamide (DMF), dimethyl sulfoxide (DMSO) dominantly showed γ type crystals regardless of preparation temperature, while the films from tetrahydrofuran (THF) exhibit α type crystals and the ones from acetone and methyl ethyl ketone (MEK) show the characteristics of both α- and γ-PVDF. The quality of micropatterns and shapes of the PVDF crystals in the patterns significantly depend on solvent evaporation rates. Micropatterns of PVDF formed in DMF at 120 °C showed the best uniformity in shape. Crystals of the PVDF nucleated at the center regions of microchannels tended to be elongated with the b-axis of γ-PVDF crystals along the channels as the concentration of the solution decreased. In contrast, crystals nucleated at the corner regions of the channels had their b-axis oriented perpendicular to the channels. In line patterns with the width of 2 μm, the corner nucleated crystals were dominant and a resulting bamboo-like crystalline microstructure was observed in which the b-axis of γ-PVDF crystals, fast growth direction, is oriented normal to the microchannels. The crystal structures of the bulk films and the micropatterns were characterized by X-ray diffractometer, Fourier transform infrared spectroscope in Attenuated Total Reflection mode, Polarized Optical and Scanning Electron Microscope.     

Total synthesis and absolute stereochemistry of (9R,10S)-epoxyheptadecan-4,6-diyn-3-one, a diacylglycerol acyltransferase inhibitor from Panax ginseng

Asymmetric synthesis of four possible stereoisomers of (9,10)-epoxyheptadecan-4,6-diyn-3-one was accomplished, and the absolute configuration of the naturally occurring (9R,10S)-epoxyheptadecan-4,6-diyn-3-one (1) was elucidated.     

Photoreaction of 2-halo-N-pyridinylbenzamide: intramolecular cyclization mechanism of phenyl radical assisted with n-complexation of chlorine radical

The photochemical behavior of 2-halo-N-pyridinylbenzamide (1-4 in Chart 1) was studied. The photoreaction of 2-chloro-N-pyridinylbenzamides 1a, 2a, 3a, and 4 afforded photocyclized products, benzo[c]naphthyridinones (6-9 and 16), in high yield, whereas the bromo analogues 1b, 2b, and 3b produced extensively photoreduced products, N-pyridinylbenzamides (1c, 10, and 11), with minor photocyclized product. Since the photocyclization reaction of 2-chloro-N-pyridinylbenzamide is retarded by the presence of oxygen and sensitized by the presence of a triplet sensitizer, acetone or acetophenone, a triplet state of the chloro analogue is involved in the reaction. Since several radical intermediates, particularly n-complexes of chlorine radical, are identified in the laser flash photolysis of 2-chloro-N-pyridinylbenzamide, an intramolecular cyclization mechanism of phenyl radical assisted with n-complexation of chlorine radical for the cyclization reaction is proposed: the triplet state (78 kcal/mol) of the chloro analogue (1a), which is populated by the excitation of 1a undergoes a homolytic cleavage of the C-Cl bond to give phenyl and chlorine radicals; while chlorine radical holds the neighbor pyridinyl ring with its n-complexation, the intramolecular arylation of the phenyl radical with the pyridinyl ring proceeds to produce a conjugated 2,3-dihydropyridinyl radical and then the conjugated radical aromatizes to afford a cyclized product, benzo[c]naphthyridinone by ejecting a hydrogen. The photoreduction product can be formed by hydrogen atom abstraction of the phenyl sigma radical from the environment.     

Convergent synthesis of PAMAM dendrimers using click chemistry of azide-functionalized PAMAM dendrons

Azide-functionalized PAMAM dendrons containing an azidopropylamine focal point were synthesized by the divergent method and applied for the construction of symmetric PAMAM-like dendrimers containing 1,2,3-triazole rings as connectors via stitching with two different multi-terminal alkynes. The stitching method was based on the click chemistry protocol, i.e., the copper-catalyzed cycloaddition reaction between an alkyne and an azide.     

Reduced Overlap Population Analysis for Triosmium Clusters

The use of reduced overlap population (ROP) analysis from EHMO calculations as a means to gauge the presence of metal–metal bonds in triosmium clusters is examined. A number of triosmium clusters containing bridging ligands have been used as test cases, including the bis-ethoxy bridged cluster Os₃(μ-OEt)₂(CO)₁₀, 1b, and some of its group 15 derivatives Os₃(μ-OEt)₂(CO)₉(EPh₃), 2. These latter clusters are newly synthesized and have been characterized completely, including by single-crystal X-ray crystallographic studies. In honour of Professor Dieter Fenske on his 65th birthday.     

A triangle-square equilibrium of metallosupramolecular assemblies based on pd(II) and pt(II) corners and diazadibenzoperylene bridging ligands

Tetraaryloxy-substituted diazadibenzoperylene bridging ligands 1a,b were employed in transition metal-directed self-assembly with Pd(II) and Pt(II) phosphane triflates 2a,b which resulted in complex dynamic equilibria between molecular triangles 3a-d and molecular squares 4a-d in solution. Characterization of the equilibria and assignment of the metallacycles was accomplished by (1)H and (31)P[(1)H] NMR spectroscopy in combination with electrospray ionization Fourier transform ion cyclotron mass spectrometry (ESI-FTICR-MS). It was found that the equilibria depend on several factors, such as the metal ion (Pd(2+) or Pt(2+)), the solvent, and the steric demand of the phenoxy substituents of the diazadibenzoperylene ligands 1a,b. Introduction of bulky tert-butyl groups in 1b shifts the equilibrium significantly in the direction of the molecular squares. Molecular dynamics simulations of the triangle and square structures revealed critical steric effects and restricted conformational flexibilities of the phosphane and diazadibenzoperylene ligands that help explain the distinct dynamic behavior observed in variable-temperature NMR studies. Concentration-dependent UV/vis and fluorescence spectroscopy revealed the limited stability of the assemblies and confirmed the reversible nature of the dynamic equilibria.