Dispersion measurements using time-of-flight remote detection MRI

Remote detection nuclear magnetic resonance and magnetic resonance imaging can be used to study fluid flow and dispersion in a porous medium from a purely Eulerian point of view (i.e., in a laboratory frame of reference). Information about fluid displacement is obtained on a macroscopic scale in a long-time regime, while local velocity distributions are averaged out. It is shown how these experiments can be described using the common flow propagator formalism and how experimental data can be analyzed to obtain effective porosity, flow velocity inside the porous medium, fluid dispersion and flow tracing of fluid.     

Dyeing behavior and mechanism of Crocein Orange G on carboxymethyl cotton fabric

Cellulose - Traditional cotton fiber dyeing requires an abundance of salt, which leads to environmental pollution. Consequently, decreasing or eliminating the use of salt has become the primary...     

基于Modbus/TCP的配电网自动化远方终端设计

为了提高对现代雷达系统的故障诊断能力,开发了一种融合在雷达系统内部的嵌入式测试系统;系统通过在雷达内部布设测试设备,设置故障监测点和加入测试信号,对雷达各部分的工作状态、性能进行监测,用于雷达系统的性能检测和故障诊断,缩短平均维修时间（MTTR）; 硬件选用精密的测量仪器和先进的总线通讯技术保证测试精度,软件采用先进的算法,融合了加电BIT、周期BIT和维护BIT等测试手段,保证故障隔离的准确,该系统已在多种雷达系统中得到成功的应用。     

多值测试诊断策略优化设计

针对电子系统中多值测试条件下的测试排序问题,提出了一种诊断策略优化方法。首先,以相关性矩阵模型为基础,将已有的二值测试的优化算法同多值测试问题相结合,提出了适用于多值测试的基于霍夫曼编码的启发式函数;其次,将平均测试代价最小和平均测试步骤最少作为优化目标,采用与或树启发式搜索算法生成诊断树,得到多值测试的诊断策略,并给出了诊断策略优化方法的具体实现步骤;最后,将其应用到航空设备的实例中。结果表明提出的基于霍夫曼编码的与或树启发式搜索算法是可行的,其生成的诊断树是最优的,比基于信息熵的与或树启发式搜索算法具有更小的平均测试代价和更少的平均测试步骤。     

紫外-可见光光束在TiO_2纳米颗粒胶体中的传输（英文）

紫外光诱导纳米颗粒胶体射流加工技术利用紫外光场对入射纳米颗粒的催化作用实现对工件表面材料的高效去除。为掌握紫外光诱导纳米颗粒胶体射流加工过程中紫外光束在纳米二氧化钛胶体中的传输特性,基于纳米二氧化钛胶体对紫外-可见光的吸收及散射理论,通过系列实验得到紫外-可见光束在不同浓度、吸收层厚度的二氧化钛纳米颗粒胶体中的传输特性及衰减关系。结果表明,为保证足够强度的紫外光能通过纳米二氧化钛胶体照射在工件表面,胶体浓度宜控制在500mol/m3以下,光-液耦合区胶体吸收层的厚度不宜超过20mm。     

Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase‐change memory (PCM) is regarded as one of the most promising candidates for the next‐generation nonvolatile memory. Its storage medium, phase‐change material, has attracted continuous exploration. Along the traditional GeTe–Sb₂Te₃ tie line, the binary compound Sb₂Te₃ is a high‐speed phase‐change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb₂Te₃, called Cr–Sb₂Te₃ (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb₂Te₃ without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10‐year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb₂Te₃. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb₂Te₃ with suitable composition is a promising novel phase‐change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)