构造Birkhoff动力学函数的Santilli第二方法的简化

研究力学系统Birkhoff动力学函数的构造方法.Santilli第二方法是目前构造Birkhoff动力学函数时常用的方法之一,但研究发现其计算公式存在冗余项.通过具体的证明得到了简化的Santilli第二方法,从而为自伴随系统Birkhoff动力学函数的构造提供了更为简洁的计算公式.举例说明结果的应用.     

基于半导体光放大器中非线性偏振旋转效应单一光缓存环全光时隙交换处理能力研究

对基于半导体光放大器(SOA)中非线性偏振旋转效应(NPR)效应的单一光缓存环多数据包的全光时隙交换(TSI)处理能力进行了理论和实验研究,在使用归纳法导出单一缓存环实现多数据包全光时隙(TSI)必要条件的基础上,针对各种全光TSI操作要求得出了相应光数据包的调度方案,在实验上,以基于SOA中NPR效应的单一光缓存环实验系统,开展了多数据包全光TSI操作的实验研究,根据上述光数据包理论调度方案进行相应系统参数设定,进行了速率为10 Gb/s的3个和4个数据包的全光TSI实验,实验结果与理论预期相符合,研究成果为减少昂贵SOA元件的用量、简化基于光缓存环全光TSI系统的结构提供了可靠依据,对推进全光TSI技术的发展具有重要意义。     

Improving Cu2ZnSnS4 (CZTS) solar cell performance by an ultrathin ZnO intermediate layer between CZTS absorber and Mo back contact

The effects of an ultrathin ZnO intermediate layer deposited at the CZTS/Mo interface on CZTS solar cell performance have been investigated in this work. The ZnO layer inhibits the generation of MoS₂ layer and the formation of voids in the CZTS absorber. Consequently, the incorporation of this layer reduces the series resistance and increases the shunt resistance, which boosts photovoltaic conversion efficiency from 1.13% to 4.3%. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

碳纳米管的变温场发射

考察了温度变化对沉积在钨丝针尖上的碳纳米管场发射的影响，发现碳纳米管场发射电流随温度升高而增大，场发射电流的稳定性基本没有变化. 多根碳纳米管的场发射特性随温度变化出现偏离Fowler-Nordheim理论的现象，这种现象可能来自碳纳米管的不均匀性.     

A new method for high-energy pulsed Gamma measurement within intense background x-rays

The accelerator-generating 6.13~MeV pulsed Gamma by ¹⁹F(p, αγ )¹⁶⁰ reaction usually synchronizes with an intense bremsstrahlung x-ray which has a maximum energy of 1~MeV. This paper proposes a new method, named the scattering and absorbing method, to diagnose the 6.13~MeV Gamma. This method includes two parts: the detector and a scatterer placed in front of the detector. The detector converts the Gamma to electrons and then collects the electrons by a scintillator. In order to restrain the interference of the low-energy background, the scintillator collects the electrons at a small angle. The scintillator is wrapped with electro-absorbing material to absorb the low-energy electrons generated by background x-rays. The theoretical sensitivity ratio of 6.13~MeV Gamma to 1~MeV x-rays is greater than 150. The scatterer is a pretreatment tool to scatter some background x-rays away from the radial beam before they enter the detector. By varying the length, the scatterer can reduce the background x-rays to an acceptable level for the detector.     

X-ray spectra induced by slow highly charged Ar q + ions in collision with Nb surface

The X-ray spectra of Nb surface induced by Ar ^q+ (q = 16,17) ions with the energy range from 10 to 20 keV/q were studied by the optical spectrum technology. The experimental results indicate that the multi-electron excitation occurred as a highly charged Ar¹⁶⁺ ion was neutralized below the metal surface. The K shell electron of Ar¹⁶⁺ was excited and then de-excited cascadly to emit K X-ray. The intensity of the X-ray emitted from K shell of the hollow Ar atom decreased with the increase of projectile kinetic energy. The intensity of the X-ray emitted from L shell of the target atom Nb increased with the increase of projectile kinetic energy. The X-ray yield of Ar¹⁷⁺ is three magnitude orders larger than that of Ar¹⁶⁺. Supported by the National Natural Science Foundation of China (Grant Nos.10774149 and 10405025)     

一类非线性T-S模糊时滞系统的鲁棒观测器型H∞控制器设计

针对同时具有分布时滞和非线性项的T-S模糊时滞系统, 提出观测器型H_∞输出反馈控制器设计方法. 首先, 以非线性矩阵不等式形式给出时滞相关的满足H_∞性能指标的稳定性分析充分条件; 其次, 给出与所给稳定性条件等价的线性矩阵不等式条件. 在此基础上, 讨论带有非线性项的观测器型H_∞输出反馈控制的可解问题. 最后, 通过仿真算例说明控制器设计方法的可行性. 关键词： T-S模糊系统 分布时滞 观测器型输出反馈控制 H_∞控制')" href="#">H_∞控制     

Preparation and Characterization of Chitosan-Blended Multiwalled Carbon Nanotubes

Composites comprised of chitosan (CS) and multiwalled carbon nanotubes (MWCNTs) were fabricated by milling and ultrasonication dispersion methods. Scanning electron microscopy images showed homogeneous dispersion of MWCNTs throughout the CS matrix for samples prepared by either ultrasonication or milling methods. Further, the crystallinity of the CS component was found to decrease with the addition of MWCNTs, although the decomposition temperature and the storage modulus (E′) of the samples were improved. The decomposition temperature for the composite prepared by milling was 7°C higher than that by the ultrasonication. Meanwhile, the E′ decreased relatively slowly with temperature in the dynamic mechanical analysis measurements. In addition, IR analysis implied an interaction between CS and MWCNTs, which likely originated from hydrogen bonds between the amino, hydroxyl, and carboxyl groups of the two components. Compared with the ultrasonication, milling was more effective to promote the formation of the hydrogen bonds between CS and the MWCNTs and thus enhance the thermal stability of CS.     

Nonisothermal Crystallization Behavior of Polypropylene-C60 Nanocomposites

The nonisothermal crystallization behavior of polypropylene (PP) and PP-fullerene (C₆₀) nanocomposites was studied by differential scanning calorimetry (DSC). The kinetic models based on the Jeziorny, Ozawa, and Mo methods were used to analyze the nonisothermal crystallization process. The onset crystallization temperature (T_c), half-time for the crystallization (t_1/2), kinetic parameter (F(T)) by the Mo method and activation energy (ΔE) estimated by the Kissinger method showed that C₆₀ accelerates the crystallization of PP, implying a nucleating role of C₆₀. Furthermore, due to the reduced viscosity of PP by adding 5% C₆₀, the parameters of crystallization kinetics for the PP-5%C₆₀ nanocomposites changed remarkably relative to that of neat PP and when lower contents of C₆₀ were added to PP.     

Biological functionalization of the amine-terminated Si(100) surface by glycine

A peptide reaction of glycine on an amine-terminated Si(100) surface was investigated using C 1s, N 1s, O 1s, and Si 2p core-level spectroscopy, where the amine-terminated Si(100) surface was prepared using NH₃. In-situ thermal treatments at a mild temperature of 50 °C after the adsorption of glycine on a room-temperature amine-terminated Si(100) surface induced the peptide reaction between the carboxyl group of glycine and the amine group of the surface. This suggests that the amine-terminated Si(100) surface can be an excellent template for constructing a junction between a biomaterial and a Si surface using a dry process.