激光陀螺磁灵敏度特性研究

分析、计算了激光陀螺的磁灵敏度特性,并进行了磁灵敏度试验.试验结果及分析表明：在腔体加工准确度不变的情况下,采用合理的设计可以大大降低激光陀螺在某些方向上的磁灵敏度,同时磁试验结果对于设计激光陀螺的磁屏蔽结构具有一定的实用价值.     

Local chemical distribution and electronic structure of Ge1−xTx DMS single crystals (T=Cr,Mn, Fe)

The spatial concentration distribution and local electronic structure of ferromagnetic Ge_1−xT_x (T=Cr, Mn, Fe) DMS single crystals have been investigated by using scanning photoelectron microscopy (SPEM), X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES). It is found that doped T ions in Ge_1−xT_x crystals are chemically phase-separated, suggesting that the observed ferromagnetism arises from the phase-separated T-rich phases in Ge_1−xT_x.     

对“微波共振跃迁法测量电子偶素2~3S_1-2~3P_1精细结构”实验拟合公式的探讨

本文对Michigan大学S.Hatamian等人在“微波共振跃迁法测量电子偶素2~3S_1-2~3P_J精细结构”实验中所用拟合公式进行了审慎的分析和推证,修正了该公式的功率增宽项,并就Mainz大学R.Ley等人对该公式的批评作了评价。最后,采用新、旧拟合公式对Michigan组实验数据进行拟合并讨论其结果。     

偶氮基染料掺杂薄膜的双光子图象存储

研究了偶氮基染料掺杂薄膜ＭＯ－ＰＶＡ和ＥＯ－ＰＶＡ的双光子存储特性。在对薄膜用Ａｒ＾＋激光作预激发下实现了Ｈｅ－Ｎｅ激光的红光存储。获得了实时和短时存储照片。光电记录存储曲线，分析了双光四能级系统的存储机制。实现确定了最佳预激发功率约为０．２８Ｗ／ｃｍ＾２，最小Ｈｅ－Ｎｅ光可存储功率密度低于０．２Ｗ／ｃｍ＾２。     

Observation of macroscopic quantum tunneling in a single Bi2Sr2CaCu2O8+delta surface intrinsic Josephson junction

We report on the first unambiguous observation of macroscopic quantum tunneling (MQT) in a single submicron Bi(2)Sr(2)CaCu(2)O(8+delta) surface intrinsic Josephson junction (IJJ) by measuring its temperature-dependent switching current distribution. All relevant junction parameters were determined in situ in the classical regime and were used to predict the behavior of the IJJ in the quantum regime via MQT theory. Experimental results agree quantitatively with the theoretical predictions, thus confirming the MQT picture. Furthermore, the data also indicate that the surface IJJ, where the current flows along the c axis of the crystal, has the conventional sinphi current-phase relationship.     

Accurate, high-order representation of complex three-dimensional surfaces via Fourier continuation analysis

We present a new method for construction of high-order parametrizations of surfaces: starting from point clouds, the method we propose can be used to produce full surface parametrizations (by sets of local charts, each one representing a large surface patch – which, typically, contains thousands of the points in the original point-cloud) for complex surfaces of scientific and engineering relevance. The proposed approach accurately renders both smooth and non-smooth portions of a surface: it yields super-algebraically convergent Fourier series approximations to a given surface up to and including all points of geometric singularity, such as corners, edges, conical points, etc. In view of their C^∞ smoothness (except at true geometric singularities) and their properties of high-order approximation, the surfaces produced by this method are suitable for use in conjunction with high-order numerical methods for boundary value problems in domains with complex boundaries, including PDE solvers, integral equation solvers, etc. Our approach is based on a very simple concept: use of Fourier analysis to continue smooth portions of a piecewise smooth function into new functions which, defined on larger domains, are both smooth and periodic. The “continuation functions” arising from a function f converge super-algebraically to f in its domain of definition as discretizations are refined. We demonstrate the capabilities of the proposed approach for a number of surfaces of engineering relevance.     

相变域硅薄膜材料的光稳定性

采用RF-PECVD技术，通过改变反应气体的硅烷浓度制备了一系列不同晶化率不掺杂的硅薄膜材料，研究了工艺变化对材料结构的影响及材料光电特性同微结构的关系.随后进行了光衰退试验，在分析光照前后光电特性变化规律的基础上，认为材料中的非晶成分是导致材料光电特性衰退的主要原因.在靠近过渡区非晶一侧的硅材料比普通非晶硅稳定，衰退率较少；高晶化率微晶硅材料性能稳定，基本不存在光衰退；在靠近过渡区微晶一侧的硅材料虽然不是完全不衰退，但相比高晶化率硅材料来说更适合制备高效微晶硅电池. 关键词： 射频等离子体增强化学气相沉积 硅薄膜 Staebler-Wronski(SW)效应 稳定性     

Mode power distribution effect in white-light multimode fiber extrinsic Fabry-Perot interferometric sensor systems

Theoretical and experimental results have shown that mode power distribution (MPD) variations could significantly vary the phase of spectral fringes from multimode fiber extrinsic Fabry-Perot interferometric (MMF-EFPI) sensor systems, owing to the fact that different modes introduce different extra phase shifts resulting from the coupling of modes reflected at the second surface to the lead-in fiber end. This dependence of fringe pattern on MPD could cause measurement errors in signal demodulation methods of white-light MMF-EFPI sensors that implement the phase information of the fringes.     

Auxiliary probe design adaptable to existing probes for remote detection NMR, MRI, and time-of-flight tracing

A versatile, detection-only probe design is presented that can be adapted to any existing NMR or MRI probe with the purpose of making the remote detection concept generally applicable. Remote detection suggests freeing the NMR experiment from the confinement of using the same radio frequency (RF) coil and magnetic field for both information encoding and signal detection. Information is stored during the encoding step onto a fluid sensor medium whose magnetization is later measured in a different location. The choice of an RF probe and magnetic field for encoding can be made based solely on the size and characteristics of the sample and the desired information quality without considering detection sensitivity, as this aspect is dealt with by a separate detector. While early experiments required building probes that included two resonant circuits, one for encoding and one for detection, a modular approach with a detection-only probe as presented here can be used along with any existing NMR probe of choice for encoding. The design of two different detection-only probes is presented, one with a saddle coil for milliliter-sized detection volumes, and the other one with a microsolenoid coil for sub-microliter fluid quantities. As example applications, we present time-of-flight (TOF) tracing of hyperpolarized (129)Xe spins in a gas mixture through coiled tubing using the microsolenoid coil detector and TOF flow imaging through a nested glass container where the gas flow changes its direction twice between inlet and outlet using the saddle coil detector.