激光诱导荧光探测水体中溶解有机物浓度

用Nd∶YAG激光器的三倍频355 nm光作为激发光源,根据激光诱导荧光(LIF)方法激发并探测污染水体的荧光光谱.通过对荧光光谱的分析处理研究归一化荧光强度,即450 nm处水中溶解有机物(DOM)峰与405 nm处水的拉曼峰的比值,反演溶解有机物浓度.用商品腐殖酸和去离子水配置成已知浓度的溶液代替标准DOM溶液进行标定,得到回归方程.结果证明,DOM的归一化荧光强度与水体中DOM浓度有较好的线性关系,因此LIF方法是对大面积水域水质进行动态遥测的较理想方法.     

灰度人脸识别形态学相关的一般理论研究

提出一般形态学相关概念,并提出一种小型联合变换相关器的硬件设计以实现一般形态学相关.提出两种改进的一般形态学相关算法,灰度图像按某种分解方法分解成一系列二值图像片.在第一种算法中,每片二值联合图像片的边缘被检测,其功率谱求和.在第二种算法中,一种情况是每片的联合变换功率谱被二值化或细化再求和;另一种情况是这些片的联合变换功率谱的总和被二值化或细化.计算机模拟结果表明,改进后的算法能改善高相似度灰度人脸图像识别的鉴别率.     

上转换发光免疫试纸条扫描检测系统研究

研制了一种以上转换发光材料作为标记物的扫描检测系统,有别于传统的测量方法,可做出定量和多重分析.扫描检测系统以扫描方式逐点测量经生物反应而结合上去的UCP颗粒的含量,记录整个免疫试纸条的信息,计算出被测样品中特定生物分子的浓度.实验结果表明,该系统对兔抗鼠疫免疫球蛋白（IgG）标准样品的检测灵敏度达到百ng/mL量级,且具有变异系数小于6%的重复性,符合生物免疫测定的要求.     

双涂层光纤应变传感器的理论与实验研究

对带有聚合物涂敷层和缓冲层的光纤应变传感器的力学特性进行了研究,建立了双涂层光纤与基体材料相互作用的线弹性理论模型.理论研究表明：在小半径近似条件下,双涂层光纤的力学传递特性决定于涂覆层和缓冲层的弹性模量的相对值;当缓冲层的弹性模量远大于涂覆层时,其作用可忽略.实验中,将光纤传感器埋入基体材料内部,利用白光干涉应变测量方法,对平均应变传递系数进行了实验研究.实验结果与理论仿真具有较好的一致性.     

红外运动小目标的检测

通过分析天空背景下红外运动小目标、噪音以及背景的特征,提出一种检测方法·首先利用向量小波变换对运动图像进行预处理;其次采用图像差分进行目标的粗检测,提取出候选目标;最后可根据运动目标和噪音的特征对候选目标进行识别,检测出真实的运动小目标·实验证明,该方法可有效检测天空背景下红外运动小目标·     

左手介质椭圆光波导基模传播特性

在椭圆柱坐标系中,采用分离变量方法,得出了左手介质椭圆光波导本征方程的近似解,通过数值计算,分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响,并将左介质光波导与右手介质光波导基模特性进行对比,得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.     

A digital filtering scheme for SQUID based magnetocardiography

Considering the properties of slow change and quasi-periodicity of magnetocardiography (MCG) signal, we use an integrated technique of adaptive and low-pass filtering in dealing with two-channel MCG data measured by high $T_{\rm c}$ SQUIDs. The adaptive filter in the time domain is based on a noise feedback normalized least-mean-square (NLMS) algorithm, and the low-pass filter with a cutoff at 100Hz in the frequency domain characterized by Gaussian functions is combined with a notch at the power line frequency. In this way, both relevant and irrelevant noises in original MCG data are largely eliminated. The method may also be useful for other slowly varying quasi-periodical signals.     

Molecular dynamics of MgSiO3 perovskite melting

The melting curve of MgSiO分子动力学 MgSiO3钙钛矿 熔化温度 高压melting temperature, molecular dynamics, high pressureProject supported by the National Natural Science Foundation of China (Grant Nos 10274055 and 10376021),the Natural Science Foundation of Gansu Province, China (Grant No 3ZS051-A25-027) and the Scientific Research Foundation of Education Bureau of Gansu Province, China (Grant No 0410-01).2005-01-125/8/2005 12:00:00 AMThe melting curve of MgSiO3 perovskite is simulated using molecular dynamics simulations method at high pressure. It is shown that the simulated equation of state of MgSiO3 perovskite is very successful in reproducing accurately the experimental data. The pressure dependence of the simulated melting temperature of MgSiO3 perovskite reproduces the stability of the orthorhombic perovskite phase up to high pressure of 130GPa at ambient temperature, consistent with the theoretical data of the other calculations. It is shown that its transformation to the cubic phase and melting at high pressure and high temperature are in agreement with recent experiments.     

Waveguides induced by grey screening solitons

We investigate the properties of waveguides induced by one-dimensional grey screening solitons in biased photorefractive crystals. The results show that waveguides induced by grey screening solitons are always of single mode for all intensity ratios, i.e. the ratios between the peak intensity of the soliton and the dark irradiance. Our analysis indicates that the energy confined near the centre of the grey soliton and the propagation constant of the guided mode of the waveguide induced by the grey screening soliton increase monotonically with intensity ratio increasing. On the other hand, when the soliton greyness increases, the energy confined near the centre of the grey soliton and the propagation constant of the guided mode of the waveguide induced by the grey screening soliton decrease monotonically. Relevant examples are provided where photorefractive crystal is of the strontium barium niobate type.     

Molecular dynamic simulation of lubricant spreading： effect from the substrate and endbead

Molecular dynamic simulations based on a coarse-grained, bead-spring model are adopted to investigate the spreading of both nonfunctional and functional perfluoropolyether (PFPE) on solid substrates. For nonfunctional PFPE, the spreading generally exhibits a smooth profile with a precursor film. The spreading profiles on different substrates are compared, which indicate that the bead-substrate interaction has a significant effect on the spreading behaviour, especially on the formation of the precursor film. For functional PFPE, the spreading generally exhibits a complicated terraced profile. The spreading profiles with different endbeads are compared, which indicate that the endbead-substrate interaction and the endbead--endbead interaction, especially the latter, have a significant effect on the spreading behaviour.