Intermolecular potential energy surface and spectra of He-HCl with generalization to other rare gas-hydrogen halide complexes

A two-dimensional (rigid monomer) intermolecular potential energy surface (PES) of the He-HCl complex has been obtained from ab initio calculations utilizing the symmetry-adapted perturbation theory (SAPT) and an spdfg basis set including midbond functions. The bond length in HCl was chosen to be equal to the expectation value in the ground vibrational state of isolated HCl. The rigid-monomer potential should be a very good approximation to the complete (three-dimensional) potential for H-Cl distances corresponding to the lowest vibrational levels of the monomer since the He-HCl interaction energy was found to be only weakly dependent on the HCl bond length in this region, at least as compared to systems such as Ar-HF. The calculated points were fitted using an analytic function with ab initio computed asymptotic coefficients. As expected, the complex is loosely bound, with the dispersion energy providing the majority of the attraction. Our SAPT PES agrees with the semiempirical PES of Willey et al. [J. Chem. Phys. 96, 898 (1992)], in finding that, atypically for rare gas-hydrogen halide complexes including the lighter halide atoms, the global minimum is on the Cl side (with intermonomer separation 3.35 A and depth of 32.8 cm(-1)), rather than on the H side, where there is only a local minimum (3.85 A, 30.8 cm(-1)). The ordering of the minima was confirmed by single-point calculations in larger basis sets and complete basis set extrapolations, and also using higher levels of theory. We show that the opposite findings in the recent calculations of Zhang and Shi [J. Mol. Struct: THEOCHEM 589, 89 (2002)] are due to the lack of midbond functions in their basis set. Despite the closeness in depth of the two linear minima, the existence of a relatively high barrier between them invalidates the assumption of isotropy, a feature of some literature potentials. The trends concerning the locations of minima within the family of rare gas-hydrogen halide complexes are rationalized in terms of the physical components of the intermolecular forces and related to monomer properties. The accuracy of the SAPT PES was tested by performing calculations of rovibrational levels. The transition frequencies obtained were found to be in excellent agreement (to within 0.02 cm(-1)) with the measurements of Lovejoy and Nesbitt [J. Chem. Phys. 93, 5387 (1990)]. The SAPT PES predicts a dissociation energy for the complex of 7.74 cm(-1) which is probably more accurate than the experimental value of 10.1+/-1.2 cm(-1). Our analysis of the ground-state rovibrational wave function shows that the He-HCl configuration is favored over the He-ClH configuration despite the ordering of minima. This is due to the greater volume of the well in the former case. We have also determined positions and widths of three low-lying resonance states through scattering calculations. These predictions are expected to be more accurate than values derived from experiment.     

Effects of alloying on the chemistry of CO and H2S on Fe surfaces

Deleterious gases such as CO and H(2)S can cause degradation of steel by reacting with the metal surface. Here we consider whether alloying the steel surface might be able to inhibit these damaging surface reactions by raising the barriers to molecular dissociation. We employ first-principles density functional theory techniques to investigate the elementary reaction pathways and barriers for CO and H(2)S on FeAl and Fe(3)Si surfaces and compare them with pure Fe surfaces (as a model for steel). We find that H(2)S dissociates on iron surfaces much more easily than CO does. Although FeAl surfaces raise the barriers for H(2)S dissociation, they significantly lower the barriers for CO dissociation. On the other hand, Fe(3)Si surfaces raise the barriers for CO dissociation, but they are as vulnerable as Fe surfaces to H(2)S dissociation. Our findings suggest that alloying iron with Al or Si is unlikely to simultaneously increase its resistance to the initial stages of chemical degradation by CO and H(2)S.     

Regioselective Re(I)-catalyzed coupling of terminal alkynes, Et2NH, and CO2 leading to anti-Markovnikov adducts

ReBr(CO)₅-catalyzed addition of Et₂NH and CO₂ to terminal alkynes afforded anti-Markovnikov adducts of alkenyl carbamates in good to excellent yield and high regioselectivity.     

Enhanced electrical conductivity in chemically modified carbon nanotube/methylvinyl silicone rubber nanocomposite

Chemically modified multiwalled carbon nanotubes/methlyvinyl silicone rubber (m-MWNT/VMQ) nanocomposites with relatively good dispersion of nanotubes were prepared by treating the surface of MWNT using γ-aminopropyltriethoxy silane (KH550). Significant enhanced electrical conductivity was discovered in the m-MWNT/VMQ nanocomposites. The results could be attributed a strong interaction between m-MWNT and VMQ which was from the chemically modification of the surface for MWNT. The electrical property was also discussed in order to understand the percolation and electrical transport mechanism. The m-MWNT/VMQ nanocomposites with high conductivity in this study are promising application as one of novel functional materials.     

芳香族重氮盐氧化还原引发体系的研究——Ⅲ.芳香族重氮盐与亚铁盐氧化还原引发丙烯腈聚合过程中微量铜离子的影响

以苯重氮硼氟酸盐与亚铁盐在微量铜离子存在时能引发丙烯腈聚合,聚合速率服从:R∝[φN_2~+]~(1/2)[Fe~(++)]~(1/4)[Cu~(++)]~(1/4),氧化还原引发历程为: Fe~(++)+Cu~(++) Fe~(+++)+Cu~+ φN_2~++Cu~+→φ·+N_2+Cu~(++) φ·+M→φM·→φMM·…该历程符合上述动力学关系。但使用对硝基苯重氮硼氟酸盐时,微量铜离子对聚合反应速率影响不大,与亚铁盐浓度在一定范围呈R∝[Fe~(++)]~(1/2)的关系,因此例的引发历程为: φN_2~++Fe~(++)→φ·+N_2+Fe~(+++) φ·+M→φM·→φMM·…苯环上推电子取代基降低了重氮基的氧化势,如对位取代甲氧基、甲基或没有取代基都不能用纯亚铁盐引发丙烯腈聚合,需有微量铜盐存在才能聚合。而拉电子取代基如对位取代硝基、羧基可用纯亚铁盐引发聚合。     

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐Molybdate(II) Anions: Synthesis,Spectroscopy, and Density Functional Theory Calculations

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐molybdate‐(II) anions, [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo), which are novel weakly coordinating anions that contain a metal carbonyl/nitrosyl moiety, have been generated in fluorosulfonic acid and completely characterized by multinuclear NMR, IR, and Raman spectroscopy as well as ESI mass spectrometry. ESI MS measurements performed for the first time on a superacidic solution system unambiguously reveal the formation of the monoanionic, mononuclear W and Mo complexes formulated as [M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo). Multinuclear NMR spectroscopic studies at natural abundance and ¹³C and ¹⁵N enrichment clearly indicate the presence of one CO ligand, two equivalent NO ligands, and two types of nonequivalent SO₃F^? groups in a 2:1 ratio. The IR and Raman spectra reveal that the two equivalent NO ligands have a cis conformation, thus indicating a fac structure. Density functional calculations at the B3LYP level of theory predict that these anions have a singlet ground state (¹A′) with a C_s symmetry along with C–O and N–O vibrational frequencies that are in agreement with the experimental observations. Mulliken population analysis shows that the monovalent negative charge is dispersed on the bulky sphere, the surface of which is covered by all the negatively charged O and F atoms with charge densities much lower than SO₃F^?, suggesting that [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo) are weakly nucleophilic and poorly coordinating anions.     

Remarkable variations in the luminescence of frozen solutions of [Au[C(NHMe)(2)](2)](PF(6)) x 0.5(acetone). Structural and spectroscopic studies of the effects of anions and solvents on Gold(I) carbene complexes

The unusual luminescence behavior of the two-coordinate gold(I) carbene complex, [Au[C(NHMe)(2)](2)](PF(6)) x 0.5(acetone), is reported. Upon freezing in a liquid N(2) bath, the colorless, nonluminescent solutions of [Au[C(NHMe)(2)](2)](PF(6)) x 0.5(acetone) become intensely luminescent. Strikingly, the colors of the emission differ in different solvents and appear only after the solvent has frozen. Solid [Au[C(NHMe)(2)](2)](PF(6)) x 0.5(acetone) is also luminescent, and the luminescence is attributed to the formation of extended chains of gold(I) centers that are connected through aurophilic attractions. Crystallographic studies of [Au[C(NHMe)(2)](2)](PF(6)) x 0.5(acetone) and [Au[C(NHMe)(2)](2)](BF(4)), which is also luminescent, reveal that both involve extended chains of cations and that the anions are hydrogen bonded to the cations through cation N-H groups. However, these chains differ in the Au...Au separations in each and in the carbene ligand orientations. In contrast, [Au[C(NMe(2))(NHMe)](2)](PF(6)) forms a colorless, nonluminescent solid, and in that solid there are no Au...Au interactions, a factor which supports the contention that aggregated species are responsible for the luminescence of [Au[C(NHMe)(2)](2)](PF(6)) x 0.5(acetone) in the solid state and in frozen solutions.     

Optimization of the abnormal Beckmann rearrangement: application to steroid 17-oximes

A novel and practical procedure was developed for the abnormal Beckmann rearrangement of steroid 17-oximes. Treatment of the 17-oximes with TFA/CH(OMe)(3) in boiling THF for 2 h gives the corresponding 13,17-seco alkene nitrile products in unprecedented high yields (70-92%). Since the alkene nitriles can be subsequently converted into 18-norsteroids, this general method provides a highly efficient route to these biologically important compounds and, by extension, to other structurally related natural products.     

Pd-catalyzed asymmetric allylic alkylation. A short route to the cyclopentyl core of viridenomycin

A palladium-catalyzed asymmetric allylic alkylation effects a dynamic kinetic asymmetric transformation of racemic isoprene monoepoxide and a surrogate for Nazarov's reagent in which a quaternary center is created with exellent ee. The resultant adduct allows easy access to a substrate for ring-closing metathesis to form a cyclopentenone and sets the stage for an 11-step synthesis of the cyclopentyl core of the antibiotic antitumor agent viridenomycin. [reaction: see text]     

Copper-catalyzed arylation of amines using diphenyl pyrrolidine-2-phosphonate as the new ligand

[Chemical reaction: See text] We have developed a general, efficient, and inexpensive catalyst system for arylation of amines by using 10 mol % of CuI as the copper source, 20 mol % of diphenyl pyrrolidine-2-phosphonate (DPP) as the ligand, K3PO4 as the base, and DMF containing 2% water (v/v) as the solvent.