Simplistic modeling approach to heterogeneous dilute-acid hydrolysis of cellulose microcrystallites

The classic kinetic model for cellulose hydrolysis is often referred to as pseudo-homogeneous, a term revealing the insight that the process is actually heterogeneous. During the past 10–15 yr, the shortcomings of this model have been demonstrated in various studies and the interest in the heterogeneous aspects has increased. The present work presents a simplistic model in which the intrinsic, heterogeneous hydrolysis and transport rates are coupled by the assumption of a constant glucosidic surface concentration. The mechanisms affecting these two rates are largely unknown, but the model serves as a guideline for further exploration of the process.     

A Novel Dimeric Coumarin from Clausena lenis

A novel dimeric coumarin (1), a dimeric of seselin named diseselin A, was isolated from the aerial part of Clausena lenis. The structure was elucidated based on the MS, 1D and 2D NMR data.     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.     

马来酸酐与二苄基马来酸酯共存体系的荧光分析法研究

本实验测定了二苄基马来酸酯甲醇溶液的荧光光谱，并发现马来酸酐对该荧光体系有猝灭作用，通过对不同马来酸酐浓度与各种浓度的二苄基马来酸酯甲醇溶液在４００ｎｍ处荧光强度数据的分析，发现马来酸酐的浓度与荧光猝灭程度在一定范围内呈良好的线型关系。据此，提出了用荧光猝灭法对马来酸酐及二苄基马来酸酯的定量分析     

合成2—芳氧基—5—氟—3H—4—嘧啶酮的新方法

由２－氰－５－氟－３Ｈ－４－嘧啶酮和取代苯酚钠在常压下反应，合成了７个未见文献报道的２－芳氧基－５－氟－３Ｈ－４－嘧啶酮化合物，产率７０￣８７％，结构经ＩＲ、＾１Ｈ ＮＭＲ和ＭＳ证实。     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.     

Fe—Si—ZSM—12型分子筛的合成及其性能的研究

本文用水热法在SiO_2-FeNH_4(SO_4)_2-MTEACl-NaOH-H_2O体系内合成出了用铁全部取代铝的Fe-Si-ZSM-12型沸石分子筛。实验结果表明,Na_2O/SiO_2、MTEA~+/SiO_2和SiO_2/Fe_2O_3比对分子筛的形成和结晶度有很大影响,Fe-Si-ZSM-12的晶化速度比较缓慢,延长晶化时间则容易转化为α-SiO_2。Fe-Si-ZSM-12的X射线衍射谱图与Al-Si-ZSM-12的基本相同,吸附数据表明,其孔径略大于Al-Si-ZSM-12的孔径,热稳定性则劣于Al-Si-ZSM-12的热稳定性。     

四核钴羰基簇合物Co4(CO)8(μ-CO)2(μ4-PSR)2的合成和晶体结构

The title compounds Co4(CO)8(μ-CO)2 (μ4-PSR) [R=-CH3, -C2H5, -C(CH3)3,-(CHa)4CH3] were synthesized by the reaction of Co2(CO)8 with RSPCl2. They were characterized by IR, 1HNMR, elemental analysis. The crystal and molecular structure of Co4(Co)8(μ-CO)2 (μ4-PSC2H5) has been determined by single crystal diffraction method. Crystal data: monoclinic, space group P21 /c, with a=8-445(3), 6=8.562(3), c= 17.125(6)Å, β=104.26 (3)' 9 V=1200.1Å3, Z=2, Dc=1.937gcm-3. Its molecular structure contains an octahedral Co4P2 skeleton which consists of a rectangular four cobalt atoms core and the Co4 core is capped above and below by two quadruply bridging PSR ligands.     

环己烷中苯甲酰苯胺的双重荧光--分子内电荷转移的直接光谱证据

自从O Connell等［1］报道苯甲酰苯胺(BA)在EPA玻璃体中异常的长波长荧光发射特性以来, 已有众多学者尝试解释该"异常"荧光的发射态性质［2～12］. Kasha等［2～7］认为长波长荧光是质子转移(PT)和电荷转移(CT)两种激发态发射的叠加, 而Azumaya等［8］则认为发射态只包含分子内扭转电荷转移(TICT)态. 应该指出的是, 在上述研究中, 电荷转移态的指认并无有力的实验事实, 而主要是依据与具有CT双重荧光的对二甲氨基苯甲氰［13,14］的类比. 显然, 有关苯甲酰苯胺的长波长荧光发射态的准确性质仍待实验阐明     

Molecular films of water-miscible ionic liquids formed on glassy carbon electrodes: characterization and electrochemical applications

This letter describes the formation and possible electrochemical applications of molecular films of water-miscible imidazolium-based ionic liquids (ILs) on glassy carbon (GC) electrodes. X-ray photoelectron spectroscopy (XPS) and electrochemical results indicate that the water-miscible ILs used in this study can interact with the GC electrode and form molecular films on the electrode surface. The formed molecular films are found to possess striking electrochemical properties such as electrocatalysis toward ascorbic acid (AA) and the capability to facilitate direct electron transfer of horseradish peroxidase (HRP). This demonstration would pave the way for new electrochemical applications of water-miscible ILs and is envisaged to be useful for the investigation of the electrochemical properties of water-miscible ILs in aqueous media provided the same counteranion is used as the supporting electrolyte.