分光光度法测定薯蓣皂苷元

采用高氯酸反应使薯蓣皂苷元显色 ,对影响显色反应的主要因素进行了考察 ,于 41 0nm波长处对穿山龙中薯蓣皂苷元的含量进行测定 ,测定结果与高效液相色谱法相近。方法的线性范围为 3.1 2～2 1 .84μg mL ,适用于薯蓣皂苷元提取过程中的常规检测     

TiO2-based photocatalysts impregnated with metallo-porphyrins employed for degradation of 4-nitrophenol in aqueous solutions: role of metal and macrocycle

Photodegradation of organic compounds in water solutions by means of economically advantageous and environment-friendly processes is a topic of growing interest. In recent years a great attention has been devoted to TiO₂-based photocatalysts for the oxidative degradation of various organic pollutants. In this context, we have prepared new photo-catalytic polycrystalline TiO₂ systems impregnated with sensitizers, i.e., copper, iron or manganese porphyrins, and investigated their photoactivity for 4-nitrophenol oxidation compared with that of bare TiO₂. A significant improvement of the photoreactivity was observed in the case of TiO₂ impregnated with copper porphyrin, while only a slight beneficial effect was observed in the case of iron porphyrin. In contrast, the presence of manganese porphyrin appeared to be detrimental.     

Preparation and adsorption performance of 5-azacytosine-functionalized hydrothermal carbon for selective solid-phase extraction of uranium

A new solid-phase extraction adsorbent was prepared by employing a two-step "grafting from" approach to anchor a multidentate N-donor ligand, 5-azacytosine onto hydrothermal carbon (HTC) microspheres for highly selective separation of U(VI) from multi-ion system. Fourier-transform infrared and X-ray photoelectron spectroscopies were used to analyze the chemical structure and properties of resultant HTC-based materials. The adsorption behavior of U(VI) onto the adsorbent was investigated as functions of pH, contact time, ionic strength, temperature, and initial U(VI) concentration using batch adsorption experiments. The U(VI) adsorption was of pH dependent. The adsorption achieved equilibrium within 30min and followed a pseudo-second-order equation. The adsorption amount of U(VI) increased with raising the temperature from 283.15 to 333.15K. Remarkably, high ionic strength up to 5.0molL(-1) NaNO(3) had only slight effect on the adsorption. The maximum U(VI) adsorption capacity reached 408.36mgg(-1) at 333.15K and pH 4.5. Results from batch experiments in a simulated nuclear industrial effluent, containing 13 co-existing cations including uranyl ion, showed a high adsorption capacity and selectivity of the adsorbent for uranium (0.63mmolUg(-1), accounting for about 67% of the total adsorption amount).     

Role of support-nanoalloy interactions in the atomic-scale structural and chemical ordering for tuning catalytic sites

The understanding of the atomic-scale structural and chemical ordering in supported nanosized alloy particles is fundamental for achieving active catalysts by design. This report shows how such knowledge can be obtained by a combination of techniques including X-ray photoelectron spectroscopy and synchrotron radiation based X-ray fine structure absorption spectroscopy and high-energy X-ray diffraction coupled to atomic pair distribution function analysis, and how the support-nanoalloy interaction influences the catalytic activity of ternary nanoalloy (platinum-nickel-cobalt) particles on three different supports: carbon, silica, and titania. The reaction of carbon monoxide with oxygen is employed as a probe to the catalytic activity. The thermochemical processing of this ternary composition, in combination with the different support materials, is demonstrated to be capable of fine-tuning the catalytic activity and stability. The support-nanoalloy interaction is shown to influence structural and chemical ordering in the nanoparticles, leading to support-tunable active sites on the nanoalloys for oxygen activation in the catalytic oxidation of carbon monoxide. A nickel/cobalt-tuned catalytic site on the surface of nanoalloy is revealed for oxygen activation, which differs from the traditional oxygen-activation sites known for oxide-supported noble metal catalysts. The discovery of such support-nanoalloy interaction-enabled oxygen-activation sites introduces a very promising strategy for designing active catalysts in heterogeneous catalysis.     

水溶性量子点标记狂犬病P蛋白单克隆抗体的研究

利用共价偶联的方式,在水溶性缩合剂1-乙基-(3-二甲基氨基丙基)碳二亚胺盐酸盐(EDC)和N-羟基硫代琥珀酰亚胺(Sulfo-NHS)促进作用下,将400 μL的2 g/L狂犬病P蛋白抗体与适量的聚丙烯酸修饰后的水溶性硫脲修饰ZnO掺Cd量子点进行共价偶联反应,经磷酸盐缓冲液(PBS,0.01 mol/L,pH 7.4)透析纯化得到目标偶联物,采用荧光发射光谱、生物质谱、酶联免疫法等对偶联物进行表征.结果表明:偶联后的量子点荧光最大发射波长红移了10 nm,荧光强度随着狂犬病P蛋白抗原浓度的增加而逐渐增强;量子点标记狂犬病P蛋白抗体后的分子离子峰在m/z 67580处,比狂犬病P蛋白抗体分子离子峰增大了1453.由此证实狂犬病P蛋白抗体成功偶联到水溶性量子点上,且结构未受破坏.     

ZnCl2催化木质素磺酸盐加氢液化的溶剂效应

选用ZnCl₂为催化剂在高压反应釜中进行加氢液化反应,利用GC-MS和红外光谱技术,研究溶剂极性及供氢能力对木质素磺酸盐液化产率及产物的影响。产率分析表明,极性溶剂有利于木质素液化转化,供氢溶剂有利于提高轻馏分产率,水溶剂条件下木质素液化转化率最高,甲醇溶剂体系条件下轻馏分产率最高,相对最低液化转化率及轻馏分产率的1,4二氧六环溶剂体系分别提高2.0倍和1.9倍。GC-MS分析表明,中等极性溶剂有利于中间产物溶解稳定,供氢溶剂四氢萘通过释放氢自由基结合稳定中间产物。乙醇溶剂条件下中间产物相对含量是48.76%,相对最低含量水溶剂体系提高2.2倍。红外光谱分析表明,醇类溶剂参与反应,焦油产物羟基峰强度增强。     

Dye‐Sensitized TiO2 Nanotube Solar Cells: Rational Structural and Surface Engineering on TiO2 Nanotubes

Owing to well‐defined structural parameters and enhanced electronic properties, highly ordered TiO₂ nanotube arrays have been employed to substitute TiO₂ nanoparticles for use in dye‐sensitized solar cells. To further improve the performance of dye‐sensitized TiO₂ nanotube solar cells, efforts have been directed toward the optimization of TiO₂ photoanodes, dyes, electrolytes, and counter electrodes. Herein, we highlight recent progress in rational structural and surface engineering on anodic TiO₂ nanotube arrays and their effects on improving the power conversion efficiency of dye‐sensitized TiO₂ nanotube solar cells.     

Isolation,Structure Determination,and Synthesis of Allo‐RA‐V and Neo‐RA‐V,RA‐Series Bicyclic Peptides from Rubia cordifolia L.

Two bicyclic hexapeptides, allo‐RA‐V ( 4 ) and neo‐RA‐V ( 5 ), and one cyclic hexapeptide, O‐seco‐RA‐V ( 6 ), were isolated from the roots of Rubia cordifolia L. Their gross structures were elucidated on the basis of spectroscopic analysis and X‐ray crystallography of compound 5 . The absolute stereochemistry of compounds 4 and 5 were established by their total syntheses, and the absolute stereochemistry of compound 6 by chemical correlation with deoxybouvardin ( 3 ). Comparison of the 3D structures of highly active RA‐VII ( 1 ) with less‐active compounds 4 and 5 suggests that the orientation of the Tyr‐5 and/or Tyr‐6 phenyl rings plays a significant role in their biological activity. The isolation of peptides 4 – 6 , along with compound 3 , and the comparison of their structures seem to indicate that peptide 6 may be the common precursor to bicyclic peptides 3 – 5 in the plant.     

Silicon‐Containing Formal 4π‐Electron Four‐Membered Ring Systems: Antiaromatic,Aromatic, or Nonaromatic?

Density functional theory calculations (B3LYP) have been carried out to investigate the 4π‐electron systems of 2,4‐disila‐1,3‐diphosphacyclobutadiene (compound 1 ) and the tetrasilacyclobutadiene dication (compound 2 ). The calculated nucleus‐independent chemical shift (NICS) values for these two compounds are negative, which indicates that the core rings of compounds 1 and 2 have a certain amount of aromaticity. However, deep electronic analysis reveals that neither of these two formal 4π‐electron four‐membered ring systems is aromatic. Compound 1 has very weak, almost negligible antiaromaticity, and the amidinate ligands attached to the Si atoms play an important role in stabilizing this conjugated 4π‐electron system. The monoanionic bidentate ligand interacts with the conjugated π system to cause π‐orbital splitting. This ligand‐induced π‐orbital splitting effect provides an opportunity to manipulate the gap between occupied and unoccupied π orbitals in conjugated systems. Conversely, compound 2 is nonaromatic because its core ring does not have a conjugated π ring system and does not fulfill the requirements of a Hückel system.     

Theoretical Insight into the Origin of Large Stokes Shift and Photophysical Properties of Anilido‐Pyridine Boron Difluoride Dyes

The geometric and electronic structures and photophysical properties of anilido‐pyridine boron difluoride dyes 1 – 4 , a series of scarce 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) derivatives with large Stokes shift, are investigated by employing density functional theory (DFT) and time‐dependent DFT (TD‐DFT) calculations to shed light on the origin of their large Stokes shifts. To this end, a suitable functional is first determined based on functional tests and a recently proposed index—the charge‐transfer distance. It is found that PBE0 provides satisfactory overall results. An in‐depth insight into Huang–Rhys (HR) factors, Wiberg bond indices, and transition density matrices is provided to scrutinize the geometric distortions and the character of excited states pertaining to absorption and emission. The results show that the pronounced geometric distortion due to the rotation of unlocked phenyl groups and intramolecular charge transfer are responsible for the large Stokes shift of 1 and 2 , while 3 shows a relatively blue‐shifted emission wavelength due to its mild geometric distortion upon photoemission, although it has a comparable energy gap to 1 . Finally, compound 4 , which is designed to realize the rare red emission in BODIPY derivatives, shows desirable and expected properties, such as high Stokes shift (4847 cm^?1), red emission at 660 nm, and reasonable fluorescence efficiency. These properties give it great potential as an ideal emitter in organic light‐emitting diodes. The theoretical results could complement and assist in the development of BODIPY‐based dyes with both large Stokes shift and high quantum efficiency.