Investigation on the Extraction Mechanism of Au（I） from Cyanide Solution with Quaternary Ammonium System

During the past decades, there has been a renewed interest in the application of solvent extraction to the recovery of Au (I) from cyanide solutions1,2. Among those various extractants, the amine extractants with the addition of organic phosphorus oxide as cosolvent have been widely investigated3,4. Various diluents and modifiers have been selected to optimize the extraction system so as to increase the loading capacity, improve the selectivity and/or reduce emulsification5. Quaternary amm…     

Sn0.5Ti0.5O2催化剂上SO2、NO和CO反应的机理

Sn0.5Ti0.5O2催化剂对NO＋CO反应活性不高， 350 ℃时NO的转化率只有50％,但反应气中含有SO2时， NO的转化率接近100％,说明SO2对Sn0.5Ti0.5O2催化剂上的NO＋CO反应具有促进作用. XPS表征发现,SO2＋CO、SO2＋NO＋CO反应后催化剂表面有微量硫存在，而反应前没有检测到硫的存在.结合反应性能测定、瞬变应答实验、XRD、TPD研究等，发现催化剂上的表面硫参与了NO的催化还原反应，是NO＋CO反应更重要的活性中心.据此，提出了SO2＋NO＋CO反应的氧化还原反应机理.     

水蒸气处理对P-ZSM-5催化性能的影响

在不同温度下,用水蒸气对P-ZSM-5催化剂进行了处理,利用XRD、NH3-TPD、比表面和孔径物理吸附仪等手段对催化剂进行了表征,研究了水蒸气处理对P-ZSM-5催化1-丁烯裂解反应性能的影响.实验结果表明:P-ZSM-5催化剂具有良好的水热稳定性;合适的水蒸气处理,有利于催化剂孔容和孔径的增加;水蒸气处理降低了P-ZSM-5催化剂的酸量和酸强度,明显提高了丁烯裂解生成丙烯的选择性、收率和催化剂的抗积炭性能.最佳的水蒸气处理温度为580℃,P-ZSM-5催化剂催化1-丁烯裂解反应的丙烯选择性为39.4%,收率为34.2%.     

Synthesis, crystal structure and magnetic property of the novel dinuclear nickel(II) complex with 4-(p-methoxyphenyl)-3,5-bis(pyridine-2-yl)-1,2,4-triazole

A novel dinuclear nickel(II) complex, [Ni₂(MOBPT)₂Cl₂(H₂O)₂]Cl₂ · 7H₂O (MOBPT = 4-(p-methoxyphenyl) −3,5-bis(pyridine-2-yl)-1,2,4-triazole), has been synthesized and characterized by elemental analysis, IR and single crystal X-ray diffraction methods. The crystal structure determination shows that the dinuclear Ni₂N₈ unit is almost planer in which each Ni^II ion is coordinated by four nitrogen atoms from MOBPT equatorially and a water molecule and a chloride ion axially in a distorted octahedral geometry. Magnetic measurements reveal a relatively weak antiferromagnetic exchange in the complex.     

{[Cu4(nip)4(4，4′-bipy)4(DMF)4]·CH3OH}n配合物的合成与晶体结构

A coordination polymer, {[Cu₄(nip)₄(4，4′-bipy)₄(DMF)₄]·CH₃OH}_n, have been synthesized by the layer method using 5-nitroisophthalic acid (H₂nip), Cu(CH₃COOH)₂ and 4,4′-bipyridine(4,4′-bipy) with three solutions in a marrow tube and structurally characterized by X-ray single-crystal structure analysis. The results indicated that the nip ligand has a μ₂ mono-atomic bridging-monodentate coordination mode and the structure is a two-dimensional network. CCDC: 623420.     

ELECTROCHEMICAL POLYMERIZATION OF ANILINE IN PHOSPHORIC ACID AND THE PROPERTIES OF POLYANILINE

The behavior of the electrochemical polymerization of aniline in a weak acid, phosphoric acid, is very similar to that in strong acids, i.e. its polymerization rate increases quickly with the electrolysis time. The FTIR spectra of polyaniline samples synthesized in phosphoric acid indicate that the counter ion H2PO4^- is present in both the oxidized form and the reduced form of polyaniline. The counter ion plays an important role in adjusting the pH value at the electrode surface of polyaniline during the oxidation and reduction processes. As a result, a pair of redox peaks still appear in cyclic voltammograms of polyaniline in a solution of sodium sulfate of pH 5.5 and in a solution of NaH2PO4 of pH 7.0,respectively, at low potential scan rate; and the color of polyaniline film also changes with applied potential at pH 7.0. Thus,the pH region for the electrochemical activity and the electrochromism of polyaniline is extended to pH 5.5 for a solution of sodium sulfate and to pH 7.0 for a solution of NaH2PO4. The conductivity of polyaniline is 3.3 S cm^-1, depending on the concentration of phosphoric acid used in the stage of polymerization of aniline. The result of elemental analysis of polyaniline is presented here.     

去溶温度对微波诱导等离子体原子吸收光谱法分析性能影响的研究

本文研究了超声雾化微波诱导等离子体原子吸收光谱法(UN-MIP-AAS)中,去溶温度对选择载气流量、微波前向功率等因素的影响,并定量考察了去溶效果。通过改善去溶条件,提高了UN-MIP-AAS的分析性能。     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.     

Synthesis of New Chiral Phosphine Ligands and Their Application in Asymmetric Hydrogenation of Ketones

The design of new chiral ligands is the key in the development of transition metal catalyzed asymmetric synthesis. Many chiral diphosphine ligands have been prepared and applied in asymmetric catalytic reactions with excellent enantioselectivities. Among the chiral diphosphine ligands that have been reported, the atropisomeric C2-symmetric phosphines with a biaryl scaffold initiated by Noyori and co-workers with BINAP were found to have the widest application in the transition metal catalyze…     

表面起伏光栅形成速率的影响规律 Ⅰ.偶氮生色团种类和官能度的影响

设计并合成了含有不同生色团以及不同官能度的环氧树脂基偶氮高分子 ,系统研究了偶氮生色团的种类和官能度对光栅形成速率的影响规律 .实验结果表明 ,偶氮苯对位是羧基的聚合物的光栅形成速率明显快于偶氮苯对位是硝基的聚合物 ,光栅形成速率随偶氮生色团官能度的增加而加快 .这两类聚合物都可以形成规整的可擦式表面起伏光栅