A New Efficient Synthesis of p-Nitrocalix[4]arene

A new efficient synthesis of p-nitrocalix[4]arene from calix[4]arene by using nitrogen dioxide is described.The compound is an useful intermediates for the introduction of other functional groups to obtain N containing substituted calix[4]arene.The reaction mechanism is briefly discussed.     

Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system:By means of polarizing microscope,SAXS,~2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, 2H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA′ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.     

芳香基团修饰的三联吡啶钌(Ⅱ)配合物光物理性质及其光损伤CT-DNA研究

钌(Ⅱ)多吡啶配合物具有丰富的光物理和光化学性质,在无机生物光化学的发展和应用中发挥了重大作用.例如,作为高效DNA光断裂试剂,钌(Ⅱ)多吡啶配合物已经得到广泛而深入的研究.     

Diffusion characteristics of a T-type microchannel with different configurations and inlet angles.

A series of symmetrical and asymmetrical microfluidic T-sensors with different inlet angles were fabricated to study the mixing characteristics of a T-type microstructure for generating concentration gradient. Computational fluid dynamics (CFD) simulations showed that the concentration gradient, transition zone and diffusion length were different for various configurations and inlet angles. Quick mix and sharp concentration gradient occurred in the asymmetrical structure with large inlet angle. The observed concentration gradients in the fabricated microchannel were consistent with the theoretical prediction. In this microstructure, stagnant zone and z-direction diffusion also affected the concentration gradient. Based on the simulation results, the microfluidic structure was optimized to generate desired concentration gradient for a cell-based study.     

GC-MS测定中的小体积样品浓缩技术

在GC-MS仪器分析中,采用窄孔毛细管分析柱(0.25 mm id/0.32.mm id),能引进样品的柱容量很小(约20～60μL气体),为了有效地完成进样过程并获得较高分辨的测定结果(离子色谱图),通常采用的技术主要有柱前"冷聚焦"、柱前分流等,以纯化和减少进样体积,确保进样过程与GC-MS系统的载气流量匹配.     

基于MCM-41分子筛表面的镱离子印迹聚合物的制备及其性能

运用离子印迹技术,以3-氯丙基三乙氧基硅烷为锚定剂,将功能单体直链聚乙烯亚胺(PEI)接枝在MCM-41分子筛表面,选择镱离子作为模板离子,以环氧氯丙烷交联制备出基于MCM-41表面的镱离子印迹聚合物Yb(Ⅲ)-IIP-PEI/MCM-41,并以同样的方法制备非离子印迹聚合物(NIP-PEI/MCM-41)。 利用傅里叶变换红外光谱仪和扫描电子显微镜等技术手段对Yb³⁺印迹聚合物进行表征,采用静态吸附法确定了Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺的最佳吸附条件及选择性吸附性能。 结果表明,Yb(Ⅲ)-IIP-PEI/MCM-41和NIP-PEI/MCM-41的最大吸附量分别为229.93和99.27 mg/g;印迹材料对Yb³⁺的吸附符合Langmuir模型;吸附平衡在40 min的时候基本可以达到,可以利用准二级动力学模型来描述其吸附过程;Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺具有较强的选择性,同时也具有很好的重复使用性能。 成功地将MCM-41和离子印迹聚合物的优点结合起来,制备出一种对稀土Yb离子既有高吸附量又有高选择性的吸附材料,为进一步将其应用在处理实际废水,分离回收低浓度稀土废水中的稀土元素等方面打下了基础。     

超声条件下溶胶-凝胶法制备CaSiO_3∶(Pb,Mn)发光材料的研究

采用溶胶-凝胶法并辅以超声技术制备了CaSiO3∶(Pb,Mn)发光材料,对合成物运用荧光光谱、DTA-TG、XRD、FTIR、TEM等手段进行了表征。研究了制备时的物料配比、超声时间及焙烧温度对样品发光强度的影响,找到了最佳的合成条件。结果表明,所得样品其荧光强度约为高温固相法样品的2倍,平均粒径则降低约300 nm。     

水相中一些有机合成反应的研究进展

水作为有机合成反应的介质具有价廉、安全、无污染、产物易于分离等优点. 综述了近年来水介质中一些有机合成反应的研究进展, 这些反应包括氧化、还原、烯丙基化、环加成、克来森、迈克尔、维悌希、缩合、偶联、自由基、有机光化学、取代等.     

Low Dimension Semiconducting Composite Nanomaterials

Recently, low dimension nanostructures have gained considerable attention due to their technological potential as unique types of nanoscale building blocks for future optoelectronic devices and systems. Semiconducting composite nanomaterials, which can combine the advantages of two or more components, have been the focus in the area of nanomaterials synthesis and device application.In this paper, we report our work on the preparation of composite nanomaterials based on CNTs.CNTs were coated by organic or inorganic species via novel and facile methods (Fig. 1 and Fig.2).These functional CNTs based composites show eminent prospects and opportunities for new applications in a wide variation of areas.     

PET-HBT嵌段热致性液晶共聚酯的合成

液晶高分子材料具有相当高的强度和模量，被誉为当代超级工程塑料．以对羟基苯甲酸甲酯、1，4-丁二醇为主要原料，经熔融酯交换合成双-对羟基苯甲酸丁二醇酯(BBHB)；以四氯乙烷为溶剂，采用溶液缩聚法将过量的BBHB与对苯二甲酰氯(TPC)合成端基为BBHB的齐聚物(PHBT)；以对苯二甲酸二甲酯与乙二醇为原料，经熔融酯交换合成对苯二甲酸双β-羟乙酯(BHET)，然后采用溶液缩聚法将BHET与少量的TPC合成端基为TPC的齐聚物(PTET)；最后以PHBT与PTET为原料，以四氯乙烷为溶剂，采用溶液缩聚法合成目标共聚酯(PET-HBT)。研究了共聚酯的双折射现象及热行为；用偏光显微镜观察了试共聚酯的织态结构并用FTIR表征了共聚酯的微观结构．