Inhibitory study of some novel Schiff base derivatives on Staphylococcus aureus by microcalorimetry

The effect of a series of novel Schiff base compounds on Staphylococcus aureus was studied by microcalorimetric method at 37 °C The results showed that all of the organic compounds had the capacity to inhibit the growth of S. aureus in different extent. And the extent and duration of the inhibitory effect on the growth of S. aureus, judged from the rate constant (k), varied with the different structure of the Schiff base compounds. According to the power-time curves, the multiplication rate constant and inhibition ratio were calculated. The growth rate constant of S. aureus (in log phase) in the presence of Schiff base compounds decreased with the increasing of the concentrations of these compounds regularly. The experimental results revealed that the hydrophilicity of Schiff bases had a great influence on their antibacterial activity. Of these Schiff bases, the greater their hydrophilicity, the higher their antibacterial activity. The antibacterial structure-activity relationship (SAR) of Schiff base derivatives was also briefly discussed.     

The phase diagram of KNO3-KClO3

The binary phase diagram of KNO₃-KClO₃ is studied by means of differential scanning calorimetry (DSC) and high-temperature X-ray diffraction. The limited solid solutions, K(NO₃)_1−x(ClO₃)_x (0<x<0.20) and K(NO₃)_1−x(ClO₃)_x (0.90<x<1.0), were formed in the KNO₃-based solid solutions and KClO₃-based solid solutions phase, respectively. For KNO₃-based solid solutions, KNO₃ ferroelectric phase can be stable from 423 to 223 K as a result of substituting of NO₃ by ClO₃-radicals. The temperatures for solidus and liquidus have been determined based on limited solid solutions. Two models, Henrian solution and regular solution theory for KNO₃-based (α) phase and KClO₃-based (β) phase, respectively, are employed to reproduce solidus and liquidus of the phase diagram. The results are in good agreement with the DSC data. The thermodynamic properties for α and β solid solutions have been derived from an optimization procedure using the experimental data. The calculated phase diagram and optimized thermodynamic parameters are thermodynamically self-consistent.     

Thermocontrolling ion permeation through binary component membrane composed of crown ether liquid crystal/PVC

In view of the nature of orderness in structure and the mesomorphism in property of liquid crystal, the function of which is further exploited by integrating it with the feature of crown ether. The monoarmed crown ether liquid crystals are successfully applied to the imitation of biomembrane transport. Binary component membrane composed of crown ether liquid crystal and PVC was first developed. Such a novel model of biomimetic membrane is capable of imitating ingeniously the thermocontrolling transport of biomembrane, thus the essential function of liquid crystal in membane transport is more fully exploited. It was suggested, consequently, that the molecules of the crown ether liquid crystal could assemble themselves to form ionic channels, as they exist in mesophase.Of still more significance is that the thermocontrolling transport of ions through the membrane is found to be operative selectively and the permeation of ion is under the direct influence of the thermal turmoil of the crown ether liquid cr     

Reactivity of 3d transition metal cations in diethylene glycol solutions. Synthesis of transition metal ferrites with the structure of discrete nanoparticles complexed with long-chain carboxylate anions

Study of the reactivity of 3d transition metal cations in diethylene glycol solutions revealed several key features that made it possible to develop a new method for synthesis of the nanocrystalline transition metal ferrites. The 3-7 nm particles of [MFe2O4]n[O2CR]m, where M = Mn, Fe, Co, Ni, and Zn, ligated on their surface with long-chain carboxylate anions, have been obtained in an isolated yield of 75-90%. The key features are the following. Complexation of the first-row transition metal cations with diethylene glycol at a presence of alkaline hydroxide is sufficient to enable control over the rate of their hydrolysis. The reaction of hydrolysis leads to the formation of metal oxide nanocrystals in colloidal solution. The nanoparticles growth is terminated by an added long-chain carboxylic acid, which binds to their surface and acts as a capping ligand. The isolated nanocrystalline powders are stable against agglomeration and highly soluble in nonpolar organic solvents.     

Insoluble polystyrene-bound quaternary onium salt catalysts for the synthesis of cyclic carbonates by the reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 26a—e ) with carbon dioxide (CO₂) was performed using insoluble polystyrene beads containing pendant quaternary ammonium or phosphonium salts as catalysts under atmospheric pressure. The reaction of 26a—e with CO₂ proceeded smoothly catalyzed by 1–2 mol % of the polymer-supported quaternary onium salts to give the corresponding cyclic carbonates ( 27a—e ) in high yields at 80–90°C. In this reaction system, the catalytic activity of the polymer-supported quaternary onium salts was strongly affected by the following factors: degree of ring substitution (DRS) of the onium salt residues to the polymer, degree of crosslinking (DC) of the polystyrene beads, chain length of the alkylene spacer between the polymer back-bone and the onium salt, hydrophobicity of the alkyl group on the onium salts, and kind of onium salts. That is, the polymer-supported quaternary phosphonium salts with low DRS and DC and with long alkylene spacer chain were found to have higher catalytic activity than low molecualr weight quaternary onium salts. The above polymer-supported catalysts can easily be separated at the end of a reaction by filtration and can be reused for at least seven runs. It was also found that the rate of reaction was proportional to the products of catalyst concentration and oxirane concentration. © 1993 John Wiley & Sons, Inc.     

DMF-甲醇体系粘度与核磁共振化学位移的同时关联

提出了一个基于局部组成概念上的核磁共振模型. 利用该模型和以前别人提出的局部组成型粘度方程, 成功地同时关联属于传递性质的粘度数据和属于波谱性质的核磁共振化学位移数据，关联所得到化学位移的平均绝对偏差小于0.0072，粘度的平均绝对偏差小于0.0006 mPa•s，结果表明提出的局部组成模型是合理的.     

反向流动注射化学发光法测定痕量铁

基于邻菲别名林对高碘酸钾－碱性鲁米诺－铁体系发光强度的增敏作用建立了水体中总铁的反向流动性化学发光检测方法。该法线性范围在１×１０＾－４－１０ｍｇ／Ｌ，检测限为３×１０＾－６ｍｇ／Ｌ，对于５×１０＾－３ｍｇ／Ｌ Ｆｅ测定９次的相对标准偏差为０．９％。此方法已用在水处理中总铁的监测。     

Temperature-programmed desorption and adsorption of hydrogen on Mo2N

Hydrogen adsorption-desorption over Mo₂N has been studied using a temperature-programmed technique. It is revealed that hydrogen on Mo₂N exhibits very high mobility leading to migration of the surface hydrogen into the sublayer and bulk of the sample or the reverse. The surface hydrogen species are preferentially formed when adsorption is carried out below 573 K. On increasing the adsorption temperature to above 573 K, the quantity of hydrogen species located in the sublayer or/and bulk of the Mo₂N sample increases significantly.     

溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能

应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明，适量钾和钴助剂的添加能显著提高催化剂合成醇的性能，尤其是提高了C2+醇的选择性。此外，反应温度、压力以及空速对合成醇影响明显，升高温度可以提高催化反应中低碳醇的收率，但选择性下降；增加压力和空速可以提高低碳醇的收率和选择性，对合成低碳醇有利。在230 ℃，6.0 MPa，14 400 h－1条件下，催化剂合成低碳醇的收率为375.4 g/kg·h，选择性为70.2%，C1OH/C2+OH为0.48。     

Development of new solid-phase microextraction fibers by sol-gel technology for the determination of organophosphorus pesticide multiresidues in food

Allyloxy bisbenzo 16-crown-5 trimethoxysilane was first used as precursor to prepare the sol-gel-derived bisbenzo crown ether/hydroxyl-terminated silicone oil (OH-TSO) SPME coating. The coating procedure involving sol solution composition and conditioning process was presented. Compared with commercial SPME stationary phases, the new coatings showed higher extraction efficiency and therefore could provide higher sensitivity for organphosphorous pesticides (OPs). Limits of detection (LODs) were in the range of 0.003-1.0 ng/g for these OPs in food samples (honey, juice, orange and pakchoi). The optimal extraction conditions of the new coatings to OPs in these samples were investigated by adjusting extraction time, salt addition, extraction temperature, and dilution ratios of samples with distilled water by using SPME coupled with gas chromatography (GC)-flame photometric detection (FPD). The method was applied to determine the concentrations of OPs in real samples.