合成1，3－二（3－羟丙基）四甲基二硅氧烷的新方法

用二乙氧基二甲基硅烷与３－氯丙醇反应，合成了新化合物３－氯丙氧基乙氧基二甲基硅烷，然后用格氏反应代替Ｗａｌｔｅｒ的钠缩合反应，最后经水解制备了１，３－二（３－羟丙基）四甲基二硅氧烷，总收率为４２．０％。     

二价氯化稀土催化丁二烯聚合的活性

<正> 稀土催化聚合双烯烃的研究表明,不同稀土元素的催化活性极不一样,对此虽有不同的解释,但通常公认Sm、Eu等活性骤低,可归之于它们在制备催化剂过程中极易被烷基铝从三价还原到二价,又根据大部分具活性的其它稀土元素在催化体系中总是三价的事实,进而推断:只有在体系中能保持三价的稀土化合物方有产生活性的可能,二价化合物则不具活性。然而,由于二价稀土化合物,特别是除Sm、Eu之外的二价化合物难以制得,迄今为止并无直接的实验事实来判断这些推断是否正确。     

八配位钇(Ⅲ)-反式-1,2-环己二胺四乙酸配合物NH4[Y(trans-CYDTA)(H2O)2]·4.5H2O的合成及分子结构

In this paper, the molecular and crystal structures of the NH₄[Y(trans CYDTA)(H₂O)₂]·4.5 H₂O(trans-CYDTA=trans 1,2-cyclohexanediaminetetraacetic acid) are reported. The crystal data are as follows: Triclinic system, P1space group,a=0.8599(6)nm,b=1.0021(7)nm,c=1.4370(9)nm,α =88.095(13)°,β =75.559(1)°,γ =88.344(12)°,V=1.1981(14)nm³,Z=2, M=708.68,D_c=1.570g· cm^-3, μ =2.506mm^-1 and F(000)=590. The final R₁ and wR₂ are 0.0571 and 0.1350 for 4205 [I >2.0σ (I)] unique reflections and 0.1007 and 0.1615 for all 4981 reflections, respectively. In the title complex, the anion [Y(trans-CYDTA)(H₂O)₂]^- has an eight coordination structure with distorted square antiprism. The trans CYDTA which acts as a hexadentate ligand with four Oatoms and two Natoms and two H₂O molecules directly coordinate to central metal Y(Ⅲ) ion. It can be known that the Y(Ⅲ) ion can form an eight coordinate compound with aminopolycarboxylic acid ligands in addition nine coordination structure.     

Terminally functionalized polyisobutylene oligomers as soluble supports in catalysis

A new phase selective hydrocarbon soluble polymer support is described.     

Rapid Fabrication of Hollow SiO2 Spheres with Novel Morphology

The hydrolysis of tetraethoxysilane (TEOS) occurred on the surface of poly(methyl methacrylate) (PMMA) microshperes immediately after these microshperes were prepared in TEOS. Micron-sized hollow SiO2 spheres were obtained by calcination of the coated PMMA microshperes. It was found that the final hollow spheres were constituted by small SiO2 particles.     

河口水体中痕量稀土元素的共沉淀预富集-电感耦合等离子体质谱法测定研究

建立了氢氧化铟共沉淀预富集 -电感耦合等离子体质谱法测定河口水体中痕量稀土元素的方法。实验结果表明 ,在80mg·L -1的In3 +和pH9.5的实验条件下 ,在1.0L水样中添加5.0～200.0ng的混合稀土标准溶液 ,均能定量回收 ,回收率在82.2 %～106.9 %之间。方法的分析流程空白为0.04(Tb)～10.17(La)ng·L -1,检出限在0.17(Yb)～1.46(La)ng·L-1之间 ,精密度 (RSD ,n=3)小于11.7 % ,可满足河口淡水和海水样品中的痕量稀土元素定量分析的要求     

LC Packing Materials for Pharmaceutical and Biomedical Analysis

 The author has prepared novel liquid chromatography (LC) packing materials for pharmaceutical and biomedical analysis. Those include LC packing materials for direct serum injection assays of drugs and their metabolites, LC packing materials for resolution of enantiomeric drugs, and uniformly sized molecularly imprinted polymers for drugs and their metabolites.     

Synthesis and in vivo study of metallofullerene based MRI contrast agent

Gd@C₈₂(OH)₄₀ has been developed as a new generation of MRI contrast agent. But recently, it was found that Gd@C₈₂(OH) _x with a larger number of OH (x>36) would lead to cage break and hence, release of highly toxic Gd ions. We synthesized the more stable Gd@C₈₂(OH) _x with less OH-number, Gd@C₈₂(OH)₁₆, and studied its proton relaxivity and MRI images. The results indicate that Gd@C₈₂(OH)₁₆ also gives high proton relaxivity, even higher than that of (NMG)₂-Gd-DTPA. The bio-distribution indicated that Gd@C₈₂(OH)₁₆ tends to be entrapped in the liver and kidney and remained in tissue for about 2 hours. The results suggest that the more stable metallofullerene derivative Gd@C₈₂(OH)₁₆ can be the potential candidate of the new MRI contrast agent.     

Preparation of uniformly sized molecularly imprinted polymers for phenolic compounds and their application to the assay of bisphenol A in river water.

Uniformly sized molecularly imprinted polymers, which can recognize bisphenol A (BPA), have been prepared by a multi-step swelling and polymerization method using BPA or a structurally related analogue of BPA [p-t-octylphenol (OP) or p-t-butylphenol (BP)] as the template molecule, 4-vinylpyridine as the functional monomer, and ethylene glycol dimethacrylate as the cross-linker. The BP-imprinted polymer showed higher molecular recognition ability for BPA than the OP-imprinted polymer. The BPA- and BP-imprinted polymers were applied for the assay of a trace amount of BPA in river water using column-switching HPLC with fluorescence detection: A BPA-imprinted polymer was used for removal of BPA from the pretreatment eluent as the trap column, and a BP-imprinted polymer was used for selective pretreatment and enrichment of BPA in river water as the pretreatment column. The calibration graph, constructed from peak area data plotted versus BPA concentration, was linear with a correlation coefficient of >0.999 in the concentration ranges of 25-1000 ppt. The limit of quantitation was 25 ppt with a 5-ml injection. The column-switching HPLC system was successfully applied for the assay of BPA in river water.