Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.     

Bridged bis-pyridinylimino dinickel(II) complexes: Syntheses, characterization, ethylene oligomerization and polymerization

A series of bridged bis(pyridinylimino) ligands were efficiently synthesized through the condensation reaction of 4,4′-methylene-bis(2,6-disubstituted aniline) with 2-pyridinecarboxaldehyde or 2-benzoylpyridine. They reacted with (DME)NiBr₂ to form dinuclear Ni(II) complexes. All resultant compounds were characterized by elemental analysis, IR spectra as well as the single-crystal X-ray diffraction to confirm the structures of ligands and complexes. Activated with methylaluminoxane (MAO), these nickel complexes showed considerably good activities for ethylene oligomerization and polymerization. Their catalytic activities and the properties of PEs obtained were depended on the arched environment of ligand and reaction conditions.     

水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.     

Preparation of Ce-Zr-O solid solution

A single phase solid solution of Ce-Zr-O can be made by using NH₄HCO₃ solution as precipitating agent. The influence of preparation conditions, such as pH, Zr⁴⁺/(CO₃ ^2-+HCO₃ ^-) and Ce³⁺/Zr⁴⁺ ratio on the formation of the solid solution were investigated. The results show that a single phase Ce-Zr-O solid solution can be formed only under a narrow window of preparation conditions, indicating that some compounds are formed in the precipitating process. The compound may contain Ce³⁺, Zr⁴⁺, CO₃ ^2-, HCO^3-, and OH^-. The solid solution so prepared can be described as Ce_0.37Zr_0.63O₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

C9‐Iridoids from Scrophularia buergeriana

Four new iridoids, buergerinins B–E ( 1 – 4 ), along with three known iridoids, were isolated from the roots of Scrophularia buergeriana. Their structures were identified on the basis of spectroscopic analysis.     

Photopolymerization induced by a benzophenone derivative photoinitiator

A benzophenone derivative photoinitiator, HBP-TDI-HQ-TDI-HBP （HTCTH）, was synthesized based on 4-hydroxy benzophenone （HBP）, toluene-2,4-diisocyanate （TDI） and hydroquinone （HQ）. HTCTH was a more effective photoinitiator which had longer wavelength absorption in the UV-vis absorption spectra than the low molecular counterpart benzophenone （BP）. It showed that both rate of polymerization （Rp） and final conversion （P） increased with increase of amine and HTCTH concentration in photopolymerization.     

Study on pyrolysis kinetics of walnut shell

Slow pyrolysis of walnut shell which is a cheap and abundantly available solid waste was carried out using thermogravimetric analysis. The effects of raw material heating rate on the pyrolysis properties and kinetic parameters were investigated. A two-step consecutive reaction model were used to simulate the pyrolysis process. The kinetic parameters were established by using the pattern search method. Comparison between experimental data and the model prediction indicated that the two-step consecutive reaction model can better describe the slow pyrolysis of walnut shell as the formation of an intermediate during the pyrolysis process was taken into account.     

纳米二氧化钛分离/富集-石墨原子吸收光谱法测定环境样品中痕量镉

以石墨炉原子吸收(GFAAS)为检测手段,研究了纳米二氧化钛(TiO2,锐钛型)对金属Cd(Ⅱ)的吸附性能,考察了吸附和解吸的主要影响因素.结果表明,在较宽的pH范围内,纳米TiO2对Cd(Ⅱ)具有良好的吸附性能,3.0 mol/L HCl能将所吸附的Cd(Ⅱ)完全洗脱.在优化的实验条件下,具有吸附容量大、吸附速度快的特点.本法的检出限(3σ)为10.6 ng/L;相对标准偏差(RSD)为1.5%,(n=7,C=2.0 μg/L),富集50倍.本法测定标准样品的测定值与参考值吻合.用于土壤类样品中Cd(Ⅱ)的测定,结果令人满意.     

含氮宾或卡宾的金属羰基簇合物的结构化学研究——Ⅰ.H_2Fe_3(N-C_6H_5)(CO)_9和Fe_3(N-C_6H_5)(μ_3-CO)(CO)_9的合成和结构

含氮宾的两个三核羰基铁簇合物是由[Et_3NH][HFe_3(CO)_(11)]与C_6H_5NCO在苯中反应获得。应用四园衍射仪测定了H_2Fe_3(N-C_6H_5)(CO)_9(Ⅰ)和Fe_3(N-C_6H_5)(μ_3-CO)(CO)_9(Ⅱ)的晶体结构。晶体数据为:C_(15)H_7NO_9Fe_3(Ⅰ),空间群P2_1/a,a=18.343(2),b=9.072(1),c=11.451(1)(?),β=102.03(1)°,V=1863.7(?)~3,Z=4,D_c=2.143g/cm~3;C_(16)H_5NO_(10)Fe_3(Ⅱ),空间群P2_1/c,a=8.634(1),b=13.026(1),c=17.642(2)(?),β=97.68(1)°,V=1966.3(?)~3,Z=4,D_c=1.820g/cm结构系用直接法解出,最后R_(Ⅰ)因子为0.033,R_(Ⅱ)因子为0.027。测定结果表明,(Ⅰ)和(Ⅱ)分子均具有C_s对称性,且三个Fe原子共面,呈近似等边三角形结构。(Ⅰ)中面桥N原子以不对称方式与三个Fe原子成键;(Ⅱ)中面桥羰基以不对称方式与三个Fe原子键连。Fe-N和Fe-C键长分别在1.896-1.938(?)和2.006-2.110(?)之间。