Study of Manganese Promoter on a Precipitated Iron-Based Catalyst for Fischer-Tropsch Synthesis

The effects of Manganese(Mn)incorporation on a precipitated iron-based Fischer-Tropsch synthesis(FTS)catalyst were investigated using N_2 physical adsorption,air differential thermal analysis (DTA),H_2 temperature-programmed reduction(TPR),and M(?)ssbauer spectroscopy.The FTS perfor- mances of the catalysts were tested in a slurry phase reactor.The characterization results indicated that Mn increased the surface area of the catalyst,and improved the dispersion ofα-Fe_2O_3 and reduced its crystallite size as a result of the high dispersion effect of Mn and the Fe-Mn interaction.The Fe-Mn inter- action also suppressed the reduction ofα-Fe_2O_3 to Fe_3O_4,stabilized the FeO phase,and(or)decreased the carburization degree of the catalysts in the H_2 and syngas reduction processes.In addition,incorporated Mn decreased the initial catalyst activity,but improved the catalyst stability because Mn restrained the reoxidation of iron carbides to Fe_3O_4,and improved further carburization of the catalysts.Manganese suppressed the formation of CH_4 and increased the selectivity to light olefins(C_(2-4)~=),but it had little effect on the selectivities to heavy(C_(5 )) hydrocarbons.All these results indicated that the strong Fe-Mn interaction suppressed the chemisorptive effect of the Mn as an electronic promoter,to some extent,in the precipitated iron-manganese catalyst system.     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

库仑滴定法测定有机硅样品中的氮含量

本文利用库仑滴定法研究了高分子和低分子硅氮化合物及含氮有机硅样品中氮含量的测定,并研究和讨论了影响测定结果准确性的因素。     

Determination of catecholamines in pheochromocytoma cell (PC-12) culture medium by microdialysis-microbore liquid chromatography

An in vitro microdialysis system was constructed for the measurement of catecholamines in pheochromocytoma cell culture medium. The novel microdialysis device is composed of a petri dish, a dialysis membrane and two transmission tubes. The dialysis membrane is located in the space of a petri dish such that it is immersed in the culture medium. Catecholamines contained in the culture medium diffused into a designed dialysis membrane with sufficient recovery (about 60%). Dialysates were collected by a sampling loop and introduced by an on-line injector to a microbore liquid chromatographic system for analysis of catecholamines. This assay yielded a detection limit of 0.2–0.5 pg/injection with acceptable intra- and inter-assay reproducibilities in 5 μl of dialysates. To evaluate the on-line microdialysis system, PC-12 cells were cultured in a petri dish within an incubator. The baseline concentration of dopamine in PC-12 cell culture medium was about 0.29 ng/ml which was elevated to 2.43 ng/ml after treatment with 0.5 mM potassium cyanide. In conclusion, the present microassay provides for the sensitive, direct measurement of catecholamines in culture medium while minimizing pretreatment procedures for sample preparation.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

Synthesis,crystal structure,electrochemical properties and large optical limiting effect of a novel 3-(E)-ferrocenyl-vinyl-<Emphasis Type="BoldItalic">N</Emphasis>-hexyl carbazole

The novel compound, 3-(E)-ferrocenyl-vinyl-N-hexylcarbazole (FVHC) was first synthesized and fully characterized by elemental analysis, IR, ¹H-NMR, single-crystal X-ray diffraction, ultraviolet (UV) absorption, cyclic voltammograms (CV) and optical limiting (OL) measurements. The result of single crystal X-ray diffraction for the compound reveals that the ferrocenyl and carbazole groups are approximately coplanar, and bridged by double-bond with E configuration, showing that there is a well-delocalized π-electron system in the molecule. The electrochemical investigation indicated that the electron in the FVHC may partially be delocalized over the π-conjugated system and CT process in functionalized carbazole systems. Besides, the compound exhibited strong UV absorption and large optical limiting effect, indicating promising potential applications as useful OL materials.     

免疫亲和柱净化/柱前衍生化-高效液相色谱荧光检测法测定粮谷中的T-2毒素

建立了免疫亲和柱净化/柱前衍生化-高效液相色谱荧光检测器测定粮谷中T-2毒素含量的方法。样品经甲醇-水(体积比为80∶20)混合溶剂提取,通过免疫亲和柱(IAC)净化,以氰酸蒽(1-AN)为衍生化试剂、4-二甲基氨基吡啶(DMAP)为催化剂进行衍生,以ZORBAX Eclipse XDB-C18 柱为分离柱,乙腈-水(体积比为80∶20)为流动相进行高效液相色谱分离及荧光检测，荧光检测的激发波长为381 nm，发射波长为470 nm。T-2毒素的质量浓度为0.01~1.5 mg/L时与峰高呈良好的线性,相关系数为0.9985。在0.01~1.5 μg/g添加水平下，回收率为79.7%~94.5%,相对标准偏差小于7%；检出限（S/N＝3）为0.01 μg/g。该方法净化效果好,灵敏度高,操作简便快速。     

Exciton interactions in CdS nanocrystal aggregates in reverse micelle

Here we report the formation and spectroscopic properties of cadmium sulfide (CdS) nanocrystal systems: individual nanocrystal and CdS aggregates. The optical absorption and luminescence spectra of the aggregated CdS nanocrystals and individual nanocrystal show exciton aggregate and individual exciton characteristics. Although it is not Bose-Einstein condensation, such aggregated quantum dots (QDs) seem to supply us opportunity to study the interactions and condensation of excitons in multi-QDs system, not in the separated QDs system.     

Neutron diffraction study of [H(4)Co(4)(C(5)Me(4)Et)(4)], a tetrahedral metal cluster complex with four face-bridging hydride ligands

A single-crystal neutron diffraction analysis of the cluster complex [H(4)Co(4)(C(5)Me(4)Et)(4)] was carried out on the new quasi-Laue diffractometer VIVALDI at the Institut Laue-Langevin. The structure consists of four face-bridging hydrides attached to a tetrahedral cobalt metal core. Average distances and angles in the core of the molecule are as follows: Co-Co = 2.571(8), Co-C = 2.158(6), Co-H = 1.749(7), H.H = 2.366(9) A; Co-H-Co = 94.6(3), H-Co-H = 85.1(3) degrees. The hydride ligands are located off the Co-Co-Co planes by an average distance of 0.923(8) A. It is suggested that the dimensions of the HCo(3) fragments found in this molecule provide reasonable estimates for analogous distances and angles associated with chemisorbed H atoms situated on the 3-fold hollows of a cobalt surface. Crystallographic details: space group P2(1)/a (monoclinic); a = 21.979(2), b = 10.924(1), c = 34.406(2) A; beta = 90.81(1) degrees; Z = 8. Final agreement factor: R(F) = 0.099 for 3779 reflections [I > 2sigma(I)] collected at 20 K.     

Socket with built-in valves for the interconnection of microfluidic chips to macro constituents

This paper reports a prototype for a standard connector between a microfluidic chip and the macro world. This prototype demonstrate a fully functioning socket for a microchip to access the outside world by means of fluids, data signals and energy supply. It supports up to 10 channels for the input and output of liquids or gases, as well as compressed air or vacuum lines for pneumatic power lines. The socket has built-in valves for each flow channel. It also contains 28 pins for the connection of electrical signals and power. Built-in valves make it possible to control the flow in each channel independently. A chip ( 11.0 x 11.0 x 0.9 mm) can be mounted into or dismounted from the socket with one touch. The fluidic connectors of the socket are designed to contact vertically on the top of chip. And the electrical connectors (the spring array) of that physically support the chip and contact lead pads at the bottom of chip. No adhesives or solders are used at any contact points. The pressure limit for the connection of working fluids was 0.2 MPa and the current limit for the electrical connections was 1 A. This socket supports both serial and parallel processing applications. It exhibits great potential for developing microfluidic systems efficiently.