基于片层光照明的新型单分子横向磁镊

磁镊是一种高精度的单分子技术,它用磁场对连有生物大分子的超顺磁球产生磁力,通过追踪磁球的位置来测量生物大分子的长度信息.磁镊包括横向磁镊和纵向磁镊.纵向磁镊空间精度高,但昂贵;横向磁镊简单便宜,但由于受其成像原理的限制,一般情况下只能连接较长的DNA等生物大分子,且其空间精度较差,进而限制了其应用范围.为了解决这个问题,本文改进了横向磁镊,用片层光照明的方法使光线主要被磁球散射,从而能够直接观察到吸附在样品槽侧壁上的磁球,这使得测量短连接的底物成为可能.对于实际应用的检测,首先测试了包含270 bp发卡结构的0.5μm双链DNA,用其中发卡结构的"折叠-去折叠"跳变过程证明了改进后的横向磁镊的确可以追踪短DNA等生物大分子.然后,进一步用16μm的λ-DNA检验了实验系统.最后,将新型横向磁镊与普通横向磁镊及纵向磁镊在小力和大力条件下拉伸不同长度DNA的噪声进行了比较,发现改进后的横向磁镊在空间精度上明显优于普通横向磁镊,与纵向磁镊相比也无明显差异.以上结果证明了改进后的横向磁镊的精度优势,并扩展了横向磁镊的应用范围.     

Dynamic conductivity modified by impurity resonant states in doping three-dimensional Dirac semimetals

The impurity effect is studied in three-dimensional Dirac semimetals in the framework of a T-matrix method to consider the multiple scattering events of Dirac electrons off impurities. It has been found that a strong impurity potential can significantly restructure the energy dispersion and the density of states of Dirac electrons. An impurity-induced resonant state emerges and significantly modifies the pristine optical response. It is shown that the impurity state disturbs the common longitudinal optical conductivity by creating either an optical conductivity peak or double absorption jumps, depending on the relative position of the impurity band and the Fermi level. More importantly, these conductivity features appear in the forbidden region between the Drude and interband transition, completely or partially filling the Pauli block region of optical response. The underlying physics is that the appearance of resonance states as well as the broadening of the bands leads to a more complicated selection rule for the optical transitions, making it possible to excite new electron-hole pairs in the forbidden region. These features in optical conductivity provide valuable information to understand the impurity behaviors in 3D Dirac materials.     

Electrochemical polymerization of alizarin and the electrochemical properties of poly(alizarin)

Electrochemical polymerization of alizarin on glassy carbon electrode (GCE) was carried out in acidic solution by cyclic voltammetry (CV), and the polymerization process was monitored by electrochemical quartz crystal microbalance (EQCM). A possible mechanism concerning the polymerization of alizarin was also proposed in this work. The as-synthesized poly(alizarin) was characterized by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The study on electrode reaction process shows that the electrode reaction of poly(alizarin) is controlled by diffusion. Finally, the activation energy (E _a) of the electrode reactions of poly(alizarin) was obtained according to the temperature dependence of the redox peak currents.     

以间质隔离法研究CH3O分子在p-H2间质中的红外吸收光谱

本研究利用低温间质隔离技术搭配红外光谱仪研究CH3ONO在p-H2间质中的光解产生CH3O。实验观察到位于689.3/694.6cm-1、945.9/951.7cm-1、1041.8cm-1、1224.7cm-1、1235.5cm-1、1347.7cm-1、1365.4cm-1、1427.5cm-1、1519.5cm-1、1522.3cm-1等处的CH3O红外吸收谱线,并分析得出各振动模式分别为电子态E1/2a1对称性的ν6、电子态E1/2a2对称性的ν6、电子态E3/2对称性的ν2、电子态E3/2e对称性的ν6、电子态E1/2e对称性的ν6、电子态E1/2a1对称性的ν5、电子态E3/2对称性的ν2、电子态E1/2对称性的ν2、电子态E3/2e对称性的ν5及电子态E1/2e对称性的ν5。     

湍流中漫射目标偏振部分相干激光的闪烁特性

采用广义惠更斯-菲涅耳原理和矩阵光学理论,研究了湍流大气中偏振部分相干激光波束从发射机到目标和从目标到接收机双程路径的闪烁特性。将产生任意偏振光束的琼斯矩阵和ABCD传输矩阵进行结合,围绕接收机处波场四阶矩展开推导,得出双程路径下偏振部分相干激光波束在接收机处的闪烁指数表达式,数值分析了大气折射率结构常数、激光波束的波长、束宽、相干长度对接收机处光强闪烁指数的影响。结果表明:偏振部分相干激光波束的闪烁指数随着目标与发射机之间距离呈现先增大、到达峰值后逐渐减小的变化趋势;相干性差的光束产生的闪烁指数小,相干长度微小的变化将会产生较大的闪烁指数变化,相干性好的光束产生较大的闪烁指数,但是相干长度的变化对闪烁指数的影响很小。     

基于视觉感知的光谱评估尺度

光谱颜色复现和色度精度是评价光谱重建算法准确的基础。简单而直观的评价指标对颜色复现控制是必不可少。该指标需要同时表征复现颜色的光谱差和色度差。在研究光谱匹配评估的方法基础上,提出基于颜色视觉感知的三种光谱评估指标,通过加权人眼视觉匹配函数,实现颜色光谱差与色度的评估。通过孟塞尔颜色系统的光谱数据,该论文分析与验证三种视觉加权的评估指标的有效性。通过孟塞尔颜色系统数据,这些指标在CIELab均匀色空间中分布均匀而稳定,从而证明加权算法的评估指标是既表征到颜色感知又反映出颜色的光谱相似度。实证结果表明,加权的指标可以实现同时表征实际人眼的颜色感知和颜色光谱差异。基于人眼视觉感知的评估指标解决了颜色的原始光谱和重建光谱的光谱匹配精度的定量评价问题。所提出评价指标通过一个简单而直观的数值实现对复现颜色光谱与色度评估。     

Improvement of characteristics of an InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of an InGaN light-emitting diode (LED) with a specific design of a staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement in optical performance compared with the design of a conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of the LED could be one of the main reasons for these improvements.