Synthesis, characterization, and transistor response of semiconducting silole polymers with substantial hole mobility and air stability. Experiment and theory

Realizing p-channel semiconducting polymers with good hole mobility, solution processibility, and air stability is an important step forward in the chemical manipulation of charge transport in polymeric solids and in the development of low-cost printed electronics. We report here the synthesis and full characterization of the dithienosilole- and dibenzosilole-based homopolymers, poly(4,4-di-n-hexyldithienosilole) (TS6) and poly(9,9-di-n-octyldibenzosilole) (BS8), and their mono- and bithiophene copolymers, poly(4,4-di-n-hexyldithienosilole-alt-(bi)thiophene) (TS6T1, TS6T2) and poly(9,9-di-n-octyldibenzosilole-alt-(bi)thiophene) (BS8T1, BS8T2), and examine in detail the consequences of introducing dithienosilole and dibenzosilole cores into a thiophene polymer backbone. We demonstrate air-stable thin-film transistors (TFTs) fabricated under ambient conditions having hole mobilities as large as 0.08 cm(2)/V x s, low turn-on voltages, and current on/off ratios > 10(6). Additionally, unencapsulated TFTs fabricated under ambient conditions are air-stable, an important advance over regioregular poly(3-hexylthiophene) (P3HT)-based devices. Density functional theory calculations provide detailed insight into the polymer physicochemical and charge transport characteristics. A direct correlation between the hole injection barrier and both TFT turn-on voltage and TFT polymer hole mobility is identified and discussed, in combination with thin-film morphological characteristics, to explain the observed OTFT performance trends.     

Air-stable, solution-processable n-channel and ambipolar semiconductors for thin-film transistors based on the indenofluorenebis(dicyanovinylene) core

We present here the synthesis, characterization, and field-effect performance of a novel n-channel semiconducting molecule TIFDMT and of the corresponding thiophene-based copolymer P-IFDMT4 based on the indenofluorenebis(dicyanovinylene) core. TIFDMT-based field-effect transistors fabricated by spin-coating exhibit high electron mobilities of 0.10-0.16 cm2/V s in air, low turn-on voltages (0 to +5 V), and high on/off ratios of 10(7)-10(8). These devices also exhibit excellent air stability over a prolonged time of storage in ambient conditions. P-IFDMT4-based devices exhibit the first example of an air-stable ambipolar polymer processable from solution     

Investigation of irradiated 1H-Benzo[b]pyrrole by ESR,thermal methods and learning algorithm

1H-Benzo[b]pyrrole samples were irradiated in the air with gamma source at 0.969?kGy per hour at room temperature for 24, 48 and 72?h. After irradiation, electron spin resonance, thermogravimetry analysis (TGA) and differential thermal analysis (DTA) measurements were immediately carried out on the irradiated and unirradiated samples. The ESR measurements were performed between 320 and 400?K. ESR spectra were recorded from the samples irradiated for 48 and 72?h. The obtained spectra were observed to be dependent on temperature. Two radical-type centres were detected on the sample. Detected radiation-induced radicals were attributed to R-^+?NH and R=^?CC₂H₂. The g-values and hyperfine constants were calculated by means of the experimental spectra. It was also determined from TGA spectrum that both the unirradiated and irradiated samples were decomposed at one step with the rising temperature. Moreover, a theoretical study was presented. Success of the machine learning methods was tested. It was found that bagging techniques, which are widely used in the machine learning literature, could optimise prediction accuracy noticeably.     

Transverse migration of a confined polymer driven by an external force

We demonstrate that a polymer confined to a narrow channel migrates towards the center when driven by an external force parallel to the channel walls. This migration results from asymmetric hydrodynamic interactions between polymer segments and the confining walls. A weak pressure-driven flow, applied in the same direction as the external force, enhances the migration. However, when the pressure gradient and the external force act in opposite directions the polymer can migrate towards the boundaries. Nevertheless, for sufficiently strong forces the polymer always migrates towards the center. A dumbbell kinetic theory explains these results qualitatively. A comparison of our results with experimental measurements on DNA suggests that hydrodynamic interactions in polyelectrolytes are only partially screened. We propose new experiments and analysis to investigate the extent of the screening in polyelectrolyte solutions.     

Combining electron-neutral building blocks with intramolecular "conformational locks" affords stable, high-mobility p- and n-channel polymer semiconductors

Understanding the relationship between molecular/macromolecular architecture and organic thin film transistor (TFT) performance is essential for realizing next-generation high-performance organic electronics. In this regard, planar π-conjugated, electron-neutral (i.e., neither highly electron-rich nor highly electron-deficient) building blocks represent a major goal for polymeric semiconductors, however their realization presents synthetic challenges. Here we report that an easily accessible (minimal synthetic steps), electron-neutral thienyl-vinylene (TVT)-based building block having weak intramolecular S···O "conformational locks" affords a new class of stable, structurally planar, solution-processable, high-mobility, molecular, and macromolecular semiconductors. The attraction of merging the weak TVT electron richness with supramolecular planarization is evident in the DFT-computed electronic structures, favorable MO energetics, X-ray diffraction-derived molecular structures, experimental lattice coehesion metrics, and excellent TFT performance. TVT-based polymer TFTs exhibit stable carrier mobilities in air as high as 0.5 and 0.05 cm(2)/V·s (n- and p-type, respectively). All-TVT polymer-based complementary inverter circuitry exhibiting high voltage gains (~50) and ring oscillator circuitry with high f(osc)(~1.25 kHz) is readily fabricated from these materials by simple inkjet printing.     

Effect of irradiation on ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate: an ESR study

Ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate [C₁₁H₁₅NO₂S] was synthesized by the Gewald method. Its single crystals were grown from an alcohol/ethyl acetate solution at 15 °C and characterized using IR and ¹H‐NMR. These single crystals were irradiated for 72 h at 298 K by a ⁶⁰Co gamma source with a dose speed of 0.864 kGy/h. After irradiation, electron spin resonance (ESR) measurements were carried out to study radiation‐induced radicals in the temperature range from 120 to 450 K. Additionally, for the single crystal, ESR angular dependencies were measured in the xy, xz and yz planes of the substance. This irradiated single crystal was analyzed based on the ESR spectra. Analysis of the spectra revealed that the radical was formed by a C–H bond fission at the carbon end of the substance. It was also observed that the color of the sample changed after irradiation. The hyperfine and g parameters were determined from the experimental spectra. It was inferred from these results that the hyperfine parameters and g value exhibited anisotropic behavior. The average values of these parameters were calculated as follows: g = 2.0088, A_H1=H2 = 20.70 G, A_H3=H4 = 10.80 G, A_Ha = 4.59 G, A_Hb = 3.24 G and, A_N = 6.10 G. Copyright © 2011 John Wiley & Sons, Ltd.     

Ti (IV) attached‐phosphonic acid functionalized capillary monolith as a stationary phase for in‐syringe‐type fast and robust enrichment of phosphopeptides

In this study, poly(vinylphosphonic acid‐co‐ethylene dimethacrylate), poly(VPA‐co‐EDMA) capillary monolith was synthesized as a starting material for obtaining a stationary phase for microscale enrichment of phosphopeptides. The chelation of active phosphonate groups with Ti (IV) ions gave a macroporous monolithic column with a mean pore size of 5.4 μm. The phosphopeptides from different sources were enriched on Ti (IV)‐attached poly(VPA‐co‐EDMA) monolith using a syringe‐pump. The monolithic capillary columns exhibited highly sensitive/selective enrichment performance with phosphoprotein concentrations as low as 1.0 fmol/mL. Six different phosphopeptides were detected with high intensity by the treatment of β‐casein digest with the concentration of 1.0 fmol/mL, using Ti (IV)@poly(VPA‐co‐EDMA) monolith. Highly selective enrichment of phosphopeptides was also successfully carried out even at trace amounts, in a complex mixture of digested proteins (molar ratio of β‐casein to bovine serum albumin, 1:1500) and three phosphopeptides were successfully detected. Four highly intense signals of phosphopeptides in human serum were also observed with high signal‐to‐noise ratio and a clear background after enrichment with Ti (IV)@poly(VPA‐co‐EDMA) monolith. It was concluded that the capillary microextraction system enabled fast, efficient and robust enrichment of phosphopeptides from microscale complex samples. The whole enrichment process was completed within 20 min, which was shorter than in the previously reported studies.     

Effects of annealing on morphological,structural and electrical properties of thermally evaporated WO3 thin films

Tungsten trioxide (WO₃) thin films were prepared by thermal evaporation method onto quartz substrates at room temperature. Effect of annealing temperature (from 200 to 800 °C) to morphology, crystallographic structure and electrical properties were investigated. In order to investigate the temperature dependant resistivity properties of the films dark current–voltage measurements were done at the temperatures of 30, 60, 90, 120 and 150 °C. From the AFM pictures it is seen that the increasing annealing temperature causes an increase in grain sizes. At elevated temperatures the grains combine to each other and thus form continuous and homogenous surfaces. From the XRD patterns it was seen that the as-prepared and annealed films at 200, 300, 310 and 320 °C were amorphous. On the other hand at 330 °C and higher temperatures the films were found as in crystallized structures (monoclinic phase). From the current–voltage measurements it was seen that the contacts areohmic and the current increased with increasing temperatures. From the calculated values it was seen that the produced films shows good semiconducting nature.     

The F1F0-ATPase binding site of dibutyltin-3-hydroxyflavone: Interactions with venturicidin,oligomycin and DCCD

Dibutyltin-3-hydroxyflavone bromide, Bu₂Sn(of), is a fluorescent probe inhibitor of mitochondrial F₁F₀ATPase which reacts with and titrates a component of F₀ with marked fluorescence enhancement and reacts similarly with chloroplast CF₁CF₀ and V-ATPases. Its use to monitor the interactions of other F₀ inhibitors (venturicidin, oligomycin, DCCD) with F₁F₀ATPase, both membrane-bound and purified by solubilization is described. Trialkyltins (Bu₃SnCl) back-titrate all Bu₂Sn(of) interaction sites; whereas the macrolide inhibitor venturicidin backtitrates 60±5% and oligomycin only 30±3% of Bu₂Sn(of) interaction sites. Bafilomycin, the macrolide inhibitor of V-ATPases, is inactive in this assay. DCCD acts in a different fashion from the other inhibitors. Current and potential applications of this fluorescent probe in mitochondrial bioenergetics and biogenesis are discussed.     

Kinetics and mechanical study of plasma electrolytic carburizing for pure iron

In this work, plasma electrolytic surface carburizing of pure iron in aqueous solution consisting of water, glycerin and NH₄Cl was investigated. Surface carburizing was carried out in 20% glycerin solution treated at 750 °C, 800 °C, 900 °C and 950 °C temperatures for 5, 10 and 30 min. The formation of hard carbon-rich layer on the surface of pure iron was confirmed by XRD analysis. Metallographic and SEM studies revealed a rough and dense carburized layer on the surface of the pure iron. Experimental results showed that the thickness of the carburized layers changes with the time and temperature. The average thickness of the carburized layer ranged from 20 to 160 μm. The hardness of the carburized samples decreased with the distance from the surface to the interior of the test material. The average hardness values of the carburized layers on the substrate ranged 550-850 HV, while the hardness of the substrate ranged from 110 HV to 170 HV. The dominant phases formed on the pure iron were found to be a mixture of cementite (Fe₃C), martensite (Fe + C) and austenite (FCC iron) confirmed by XRD. Wear resistance in all plasma electrolytic carburized samples is considerably improved in relation to the untreated specimen. After carburizing, surface roughness of the samples was increased. Friction coefficients were also increased because of high surface roughness.