The development of iodide-based methods for batch and on-line determinations of phosphite in aqueous samples

Recent developments in the field of microbiology and research on the origin of life have suggested a possible significant role for reduced, inorganic forms of phosphorus (P) such as phosphite [HPO₃²⁻, P(+III)] and hypophosphite [H₂PO₂⁻, P(+I)] in the biogeochemical cycling of P. New, robust methods are required for the detection of reduced P compounds in order to confirm the importance of these species in the overall cycling of P in the environment. To this end, we have developed new batch and flow injection (FI) methods for the determination of P(+III) in aqueous solutions. The batch method is based on the reaction of P(+III) with a mixed-iodide solution containing tri-iodide (I₃⁻) and penta-iodide (I₅⁻). The oxidation of P(+III) consumes free I₃⁻ and I₅⁻ in solution. The remaining I₃⁻ and I₅⁻ subunits are then allowed to react with the amylose content in starch to form a blue complex, which has a λ_max of 580 nm. The measurement of this blue complex is directly correlated with the concentration of P(+III). The on-line FI method employs the same reaction between P(+III) and mixed-iodide producing phosphate [P(+V)] that is determined spectrophotometrically by the molybdenum blue method employing ascorbic acid at a λ_max of 710 nm. The linear range for both the batch and FI determination of P(+III) was 1.0–50 μM with detection limits of 0.70 and 0.36 μM, respectively. Interference studies for the batch method show that arsenite [As(+III)] and sulfite [S(+IV)] can also be determined by this technique; however, these interferences can be circumvented by oxidizing As(+III) and S(+IV) using KMnO₄ which is an ineffective oxidant for P(+III). Both methods were applied to P(+III) determinations in ultra-pure water and simulated creek water. Results and analytical figures of merit are reported and future work is considered.     

Doped colloidal photonic crystal structure with refractive index chirping to the [111] crystallographic axis

A three-dimensionally ordered array of close-packed colloidal spheres, a photonic crystal structure in which the refractive index of the medium interstitial lattice in a colloidal crystal spatially changes in the [111] crystallographic axis, is demonstrated. The colloidal photonic crystal structure with refractive index chirping was produced by infiltration of a monomer and organic dopants with a high refractive index into a silica opal, followed by interfacial gel polymerization. The resulting photonic crystal structure has a gradually varying stop band at each different (111) plane in the face-centered cubic (fcc) crystal structure at a normal incidence. This novel structure exhibited optical characteristics that have band-gap broadening by the superposition of stop bands at each plane of the crystal with different dielectric functions. Moreover, the refractive index perturbation in the [111] fcc opal also showed a defect state within a pseudo-photonic band gap. This new type of photonic crystal structure should be useful for the band-gap engineering of photonic-band-gap materials.     

Intermolecular shielding from molecular magnetic susceptibility. A new view of intermolecular ring current effects

This paper presents calculations of the NICS (nuclear independent chemical shieldings) in a rectangular grid surrounding the molecules of benzene, naphthalene and coronene. Using the relationship between calculated NICS and the induced magnetic field, the calculated NICS are used to predict intermolecular effects due to molecular magnetic susceptibility or ring current effects. As expected from approximate ring current models, these intermolecular shielding effects are concentrated along the direction perpendicular to the molecular plane and they approach asymptotically to a dipolar functional dependence, i.e. (1-3 cos(2)theta)/r(3)). The deviations from the dipolar functional form require that the calculations of these intermolecular effects be done using a suitable interpolation scheme of the NICS calculated on the grid. The analysis of the NICS tensor components shows that these intermolecular shielding effects should be primarily expected on shielding components of the neighboring molecules nuclei, which are perpendicular to the molecular plane of the aromatic compound generating the induced field. The analysis of the calculated NICS along the series benzene, naphthalene and coronene shows that these intermolecular effects increase monotonically with the number of aromatic rings.     

17O NMR spectra of some organotin(IV) compounds containing O,C,O-chelating ligands

The 17O chemical shifts of substituted benzyl ethers and a set of organotin(IV) derivatives containing O,C,O-chelating ligands were studied. Measured 17O chemical shifts were correlated with the additivity substituent increments for carbon atoms in the alkyl groups, and intramolecular Sn-O distance was obtained by X-ray diffraction techniques in the solid state.     

Surface engineering of poly(dimethylsiloxane) microfluidic devices using transition metal sol-gel chemistry

We report the coating of poly(dimethylsiloxane) (PDMS) microchannels using transition metal sol-gel chemistry and the subsequent characterization of the coatings. The channels were created using soft polymer lithography, and three metal alkoxide sol-gel precursors were investigated, titanium isopropoxide, zirconium isopropoxide, and vanadium triisobutoxide oxide. The metal alkoxides were diffused into the sidewalls of a PDMS channel and subsequently hydrolyzed using water vapor. This procedure resulted in the formation of durable metal oxide surfaces of titania, zirconia, or vanadia. The resulting surfaces were characterized using contact angle, X-ray photoelectron spectroscopy (XPS), Raman, transmission electron microscopy (TEM), scanning electron microscopy (SEM), atomic force microscopy (AFM), and electroosmotic mobility (EOM) measurements. All of the metal oxide-modified PDMS surfaces were significantly more hydrophilic than native PDMS. Contact angles for the coatings were 90 degrees for PDMS-ZrO2, 61 degrees for PDMS-TiO2, and 19 degrees for PDMS-vanadia. XPS showed the presence of titania, zirconia, and vanadia on the PDMS surface. XPS spectra also showed no chemical modification of the PDMS after the in situ deposition of the particles either in the Si-O, Si-C, or C-H bonds of the PDMS. The particles deposited in situ were imaged with TEM and were found to be homogeneously distributed throughout the bulk of the PDMS. EOM measurements of the inorganic coatings were stable over a period of at least 95 days. Both cathodic and anodic EOMs could be generated depending upon buffer pH used. The points of net zero charge for PDMS-TiO2, PDMS-ZrO2, and PDMS-vanadia channels were calculated using EOM versus pH measurements and were found to be 4.1 +/- 0.25, 6.1 +/- 0.2, and 7.0 +/- 0.43, respectively. In addition to modifying PDMS channels with inorganic coatings, these inorganic coatings were derivatized with various organic functionalities including oligoethylene oxide (OEO), amino, perfluoro, or mercapto groups using silane chemistry. Contact angle measurements for perfluoro, mercapto, amino, and OEO-coated surfaces yielded contact angles of 120 degrees , 76 degrees , 45 degrees , and 23 degrees , respectively. These contact angles did not change over the period of 95 days. OEO-coated channels reduced the EOM by 50% from native PDMS-TiO2 to 0.9 +/- 0.05 x 10(-4) cm2/V.s (n = 5, 5.5% RSD).     

Micrometrically scaled textured metallic hydrophobic interfaces validate the Cassie-Baxter wetting hypothesis

The possibility of forming a hydrophobic metallic interface is shown when it is micrometrically textured. On such surface obtained by gold coating the polymer honeycomb template, the apparent contact angle of water was observed to be close to or greater than 90 degrees . The metal hydrophobicity is explained by trapping air inside pores of pattern according to the Cassie-Baxter wetting model. The agreement between calculated and observed values of the apparent contact angle justifies the applicability of this model in the present case. Formation of the acute local (Young) angle on the pore surface is provided by its concave form.     

Enzymatic rotating biosensor for cysteine and glutathione determination in a FIA system

The high sensitivity that can be attained using an enzymatic system and mediated by catechols has been verified by on-line interfacing of a rotating biosensor and continuous flow/stopped-flow/continuous-flow processing. Horseradish peroxidase, HRP, [EC 1.11.1.7], immobilized on a rotating disk, in presence of hydrogen peroxide catalyzed the oxidation of catechols, whose back electrochemical reduction was detected on glassy carbon electrode surface at −150 mV. Thus, when l-cysteine (Cys) or glutathione (GSH) was added to the solution, these thiol-containing compounds participate in Michael addition reactions with catechols to form the corresponding thioquinone derivatives, decreasing the peak current obtained proportionally to the increase of its concentration. Cys was used as the model thiol-containing compound for the study. The highest response for Cys was obtained around pH 7. This method could be used to determine Cys concentration in the range 0.05-90 μM (r = 0.998) and GSH concentration in the range 0.04-90 μM (r = 0.999). The determination of Cys and GSH were possible with a limit of detection of 0.7 and 0.3 nM, respectively, in the processing of as many as 25 samples per hour. Current response of the HRP-rotating biosensor is not affected by the oxidized form of GSH and Cys (glutathione disulfide, GSSG, and l-cystine, respectively), by sulfur-containing and alkyl-amino compounds such as methionine and lysine, respectively. The interferences from easily oxidizable species such as ascorbic acid and uric acid are lowest.     

Study on photodegradation of injection-moulded β-polypropylenes

The effects of UV irradiation on β-nucleated injection-moulded polypropylenes (β-iPP) have been studied at several structural levels. Commercially available isotactic polypropylene was modified by 0.03 wt.% β-nucleating agent based on N,N′-dicyclohexylnaphthalene-2,6-dicarboxamide. β-iPP specimens were injection-moulded using a processing set-up in which only mould temperature was varied. It was found that specimens consisted of a skin-core structure, which was strongly influenced by varying mould temperatures. The structural development consequently affected the specimen degradability as shown by wide-angle X-ray scattering, light microscopy and micro-infrared microscopy.     

Intersite structural rearrangement of the blue copper site induced by substrate binding: spectroscopic studies of a copper-containing nitrite reductase from Alcaligenes xylosoxidans NCIMB 11015

A copper-containing nitrite reductase from Alcaligenes xylosoxidans NCIMB 11015 has its own unique blue or type 1 copper protein resonance Raman spectrum in the usual Cu-S(Cys) stretching region, nu(Cu-S(Cys)), with a pair of strong peaks at 412 and 420 cm(-1) and a weak peak at 364 cm(-1). The predominantly nu(Cu-S(Cys)) Raman bands at 412, 420, and 364 cm(-1) of the type 1 copper site all shifted to higher frequencies upon binding of nitrite to the type 2 copper site, and the resonance Raman difference spectra progressively intensified with the increments of nitrite ion concentration. Positive support for substrate binding to the type 2 copper is provided by the nu(Cu-S(Cys)) bands in the resonance Raman spectrum of a type 2 copper-depleted enzyme, which is insensitive to the presence of NO2-. The shift to higher frequency of the Raman bands of the type 1 copper center with the addition of nitrite ions suggests a stronger Cu-S(Cys) interaction in the substrate-bound A. xylosoxidans nitrite reductase.