Molecular recognition of adeninium cations on anionic metal-oxalato frameworks: an experimental and theoretical analysis

Reactions of adenine with water-soluble oxalato complexes at acidic pH give the compounds (1H,9H-ade)2[Cu(ox)2(H2O)] (1) [H2ade=adeninium cation (1+), ox=oxalato ligand (2-)] and (3H,7H-ade)2[M(ox)2(H2O)2].2H2O [M(II)=Co (2), Zn (3)]. The X-ray single crystal analyses show that the supramolecular architecture of all compounds is built up of anionic sheets of metal-oxalato-water complexes and ribbons of cationic nucleobases among them to afford lamellar inorganic-organic hybrid materials. The molecular recognition process between the organic and the inorganic frameworks determines the isolated tautomeric form of the adeninium cation found in the crystal structures: the canonical 1H,9H for compound 1, and the first solid-state characterized 3H,7H-adeninium tautomer for compounds 2 and 3. Density functional theory calculations have been performed to study the stability of the protonated nucleobase forms and their hydrogen-bonded associations by comparing experimental and theoretical results.     

Stability of silicon-doped C60 dimers

A theoretical investigation on the structure, stability, and thermal behaviors of the smallest polymeric units, the dimers, formed from substitutionally Si-doped fullerenes is presented. A density functional based nonorthogonal tight-binding model has been employed for describing the interatomic interactions. The study focuses on those polymeric structures which involve Si-Si or Si-C interfullerene bonds. The binding energy of the dimers increases with their Si content from about 0.25 eV in C(60)-C(60) to about 4.5 eV in C(58)Si(2)-C(58)Si(2). Moreover, the C(59)SiC(59) dimer, linked through the sharing of the Si atom between the two fullerenes, has been also considered. Upon heating, the dimers eventually fragment into their constituent fullerene units. The fragmentation temperature correlates with the strength of the interfullerene bonds. C(58)Si(2)-C(58)Si(2) exhibits a higher thermal stability (fragmentation temperature of approximately 500 K) than the pure carbon C(60)-C(60) dimer (with a fragmentation temperature of approximately 325 K). Given the higher structural and thermal stabilities of the Si-doped fullerene dimers, the authors propose the use of substitutionally Si-doped fullerenes as the basic units for constructing new fullerene-based polymers.     

Density functional calculations of NMR shielding tensors for paramagnetic systems with arbitrary spin multiplicity: validation on 3d metallocenes

The calculation of nuclear shieldings for paramagnetic molecules has been implemented in the ReSpect program, which allows the use of modern density functional methods with accurate treatments of spin-orbit effects for all relevant terms up to order Omicron(alpha4) in the fine structure constant. Compared to previous implementations, the methodology has been extended to compounds of arbitrary spin multiplicity. Effects of zero-field splittings in high-spin systems are approximately accounted for. Validation of the new implementation is carried out for the 13C and 1H NMR signal shifts of the 3d metallocenes 4VCp2, 3CrCp2, 2MnCp2, 6MnCp2, 2CoCp2, and 3NiCp2. Zero-field splitting effects on isotropic shifts tend to be small or negligible. Agreement with experimental isotropic shifts is already good with the BP86 gradient-corrected functional and is further improved by admixture of Hartree-Fock exchange in hybrid functionals. Decomposition of the shieldings confirms the dominant importance of the Fermi-contact shifts, but contributions from spin-orbit dependent terms are frequently also non-negligible. Agreement with 13C NMR shift tensors from solid-state experiments is of similar quality as for isotropic shifts.     

Improving the universal response of evaporative light scattering detection by mobile phase compensation

Mobile phase compensation, first reported for the charged aerosol detector (CAD), was used as a suitable method to overcome problems related to the mobile phase-dependent response of the evaporative light scattering detector (ELSD). Mobile phase compensation was effectively performed both in the flow injection- and in gradient modes. Without compensation, the response factors of the ELSD for six sulfonamide drugs differed by a factor of two when varying the mobile phase composition between 10 and 90% acetonitrile. This change could be effectively eliminated using the technique of mobile phase compensation, where a secondary pump with a reversed gradient was used to provide the detector with a constant composition of the mobile phase. For identical experimental conditions, the ELSD showed a nearly constant, albeit somewhat reduced, response with compensation. This indicates that under such conditions, the ELSD behaved as a concentration-sensitive detector. The analysis of sulfonamides drugs at 0.05% level using gradient UPLC-ELSD separation with mobile phase compensation is demonstrated.     

Fibre selection based on an overall analytical feature comparison for the solid-phase microextraction of trihalomethanes from drinking water

This paper describes the optimization of solid-phase microextraction (SPME) conditions for three different fibres (Carboxen-polydimethylsiloxane (CAR-PDMS), divinylbenzene-Carboxen-polydimethylsiloxane (DVB-CAR-PDMS) and polydimethylsiloxane-divinylbenzene (PDMS-DVB)) used to determine trihalomethanes (THMs) in water by headspace solid-phase microextraction and gas chromatography (HS-SPME-GC). The influence of temperature and salting-out effect was examined using a central composite design for each fibre. Extraction time was studied separately at the optimum values found for temperature and sodium chloride concentration (40 degrees C and 0.36g mL-1). The HS-SPME-GC-MS method for each fibre was characterised in terms of linearity, detection (LOD) and quantification (LOQ) limits and repeatability. The fibre PDMS-DVB was selected as it provided a broader linear range, better repeatability and lower detection and quantification limits than the others, particularly CAR-PDMS fibre. The accuracy of the proposed method using the PDMS-DVB fibre was checked by a recovery study in both ultrapure and tap water. A blank analysis study showed the absence of memory effects for this fibre. The reproducibility (expressed as a percentage of relative standard deviation) was 6-11% and the detection limits were between 0.078 and 0.52microgL-1 for bromoform and chloroform, respectively. Finally, the method was applied to determine THM concentration in two drinking water samples.     

Fully integrated microfluidic separations systems for biochemical analysis

Over the past decade a tremendous amount of research has been performed using microfluidic analytical devices to detect over 200 different chemical species. Most of this work has involved substantial integration of fluid manipulation components such as separation channels, valves, and filters. This level of integration has enabled complex sample processing on miniscule sample volumes. Such devices have also demonstrated high throughput, sensitivity, and separation performance. Although the miniaturization of fluidics has been highly valuable, these devices typically rely on conventional ancillary equipment such as power supplies, detection systems, and pumps for operation. This auxiliary equipment prevents the full realization of a "lab-on-a-chip" device with complete portability, autonomous operation, and low cost. Integration and/or miniaturization of ancillary components would dramatically increase the capability and impact of microfluidic separations systems. This review describes recent efforts to incorporate auxiliary equipment either as miniaturized plug-in modules or directly fabricated into the microfluidic device.     

New ceramic-carbon composites for electrodes for electrochemical capacitors

A new class of composite materials is introduced. Fine powders of silica, titania, Y-modified zirconia, and three types of alumina were pressed and sintered to form porous monoliths with relatively uniform pore structure. Carbon was then deposited in the pores of such monoliths by thermal decomposition of dichloromethane, cyclohexene, and glucose. The structure of the carbon deposit was studied by low-temperature nitrogen adsorption and by thermal analysis. The composite materials were used as electrodes in electrochemical capacitors with 1-ethyl-3-methylimidazolium trifluoromethylsulfonate (a low-temperature ionic liquid) as the electrolyte. High capacitances were observed for glucose-derived materials, which had high specific surface areas.     

Complexes of titanium and zirconium based on [C5Me4CH2-(2-C5H4N)] ligand

Half-sandwich [η⁵:η¹-κN-C₅Me₄CH₂-(2-C₅H₄N)]MCl₃ (M = Ti (4), Zr (5)) and sandwich [η⁵-C₅Me₄CH₂-(2-C₅H₄N)][η⁵-C₅Me₅]ZrCl₂ (6) ring-peralkylated complexes have been prepared and characterized. Evidence of the intramolecular coordination of the side-chain pyridyl group both in 4 and 5 in solutions is provided by NMR spectroscopy data. Crystal structure of an adduct 5-py with one molecule of pyridine has been established by X-ray diffraction analysis.     

Intramolecularly coordinated organoantimony(III) carboxylates

The reactions of organoantimony chlorides L^1,2SbCl₂1 and 2 ([2,6-(ROCH₂)₂C₆H₃]⁻, R = Me; L¹ and R = t-Bu; L²) with silver salts of selected carboxylic acids resulted to corresponding organoantimony carboxylates L^1,2Sb(OOCR′)₂, 1a-c (for L¹) and 2a-c (for L²), where R′ = CH₃ for 1a, 2a; R′ = CHCH₂ for 1b, 2b and R′ = CF₃ for 1c, 2c. All compounds were characterized by the help of elemental analysis, ESI-MS, ¹H and ¹³C NMR spectroscopy. The solid state structure investigation using single crystal X-ray diffraction techniques (2a, c) and IR spectroscopy revealed significant differences in coordination mode of both O,C,O chelating ligand and carboxylic groups in this set of compounds. The structure of all compounds in solution of non-coordinating solvent (CDCl₃) was determined by means of variable temperature ¹H, ¹³C, ¹⁹F NMR spectroscopy and IR spectroscopy.