Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Conformation of glycomimetics in the free and protein-bound state: structural and binding features of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man

The conformational properties of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man in solution have been carefully analyzed by a combination of NMR spectroscopy and time-averaged restrained molecular dynamics. It has been found that both the alpha-1,3- and the alpha-1,6-glycosidic linkages show a major conformational averaging. Unusual Phi ca. 60 degrees orientations for both Phi torsion angles are found. Moreover, a major conformational distinction between the natural compound and the glycomimetic affects to the behavior of the omega(16) torsion angle around the alpha-1 --> 6-linkage. Despite this increased flexibility, the C-glycosyl analogue is recognized by three mannose binding lectins, as shown by NMR (line broadening, TR-NOE, and STD) and surface plasmon resonance (SPR) methods. Moreover, a process of conformational selection takes place, so that these lectins probably bind the glycomimetic similarly to the way they recognize the natural analogue. Depending upon the architecture and extension of the binding site of the lectin, loss or gain of binding affinity with respect to the natural analogue is found.     

Analysis of the IGLO bond contributions to the 13C shielding tensors in the local bond frame

A new method is presented to analyze the IGLO (individual gauge for localized orbitals) bond contributions in ¹³C chemical shielding. The IGLO bond contributions calculated in the molecular frame are rotated to a local bond frame, in which one component is selected along the bond. This procedure removes the explicit angular dependence of the IGLO bond contributions and allows a comparison of the bond contributions in different molecules. The results provide a new method to study the electronic basis of shielding interactions. The problems associated with the multiple gauge origins used in the IGLO method are discussed in their relationship to the bond contribution analysis.     

The Antiepileptic Lamotrigine and Its Analogues: Comparative Theoretical Electronic Properties

Electronic properties of lamotrigine (LTG) and two analogues (A1 and A2) are compared through MOPAC-AM1 calculations. Two stable conformers of LTG are calculated to exist in agreement with X-ray crystallography. In the three compounds and the two conformers for each of them, the more favorable protonation sites are N₂ and N₄; these should then be the sites appropriate for interaction with a receptor, and group valence reinforces the supposition. The molecular electrostatic potentials show that a region between the two chlorine atoms in LTG could be the site for an electrostatic interaction with a corresponding site in the receptor. The fluorine atom in A1 would play an equivalent role. A simple model for LTG-receptor interaction is proposed.     

Spectrophotometric study of bismuth with N-(2-acetamido)iminodiacetic acid (ADA): Determination of bismuth in pharmaceutical formulations

A new method for the Spectrophotometric determination of bismuth using N-(2-acetamido)iminodiacetic acid as complexometric agent is proposed. The complex is formed in a wide pH range, 5.5–7.5, and has a maximum absorption at 265 nm. Beer's law is obeyed in the interval 3.8–17.9 μg of bismuth(III)/ml, with a minimum photometric error of 2.3. The molar absorptivity is 9.1 × 10³ liters/cm mol. The stoichiometry of the reaction takes place in the metal-to-ligand ratio 1:2. The interferences produced by the more common ions are studied. The method has been successfully applied to the determination of bismuth in pharmaceutical formulations.     

The first fluorogenic assay for detecting a Baeyer-Villigerase activity in microbial cells

The first fluorogenic assay allowing for detection of microbial enzymes able to perform Baeyer-Villiger oxidation is described. This is based on the use of 4-oxopentyl umbelliferyl ether 1 as a fluorogenic substrate. When Baeyer-Villigerases active against this test ketone are present in the selected whole cells, 1 is transformed into 3-hydroxypropyl umbelliferyl ether 3, which, in a subsequent step, releases the fluorescent product umbelliferone. Different microorganisms, known to be endowed with Baeyer-Villigerase activity, were assayed.     

Use of a continuous flow solid-phase spectroscopic sensor using two sensing zones: determination of thiamine and ascorbic acid

A simple, rapid, inexpensive, and automated flow-through solid-phase spectroscopic sensing device is proposed for the sequential determination of 2 vitamins: thiamine and ascorbic acid. The vitamins are concentrated on ion-exchange gels, thiamine on Sephadex SP C-25, and ascorbic acid on Sephadex QAE A-25; both solid supports are packed in 2 different flow cells. The absorbance is monitored directly on the solid phase with a double-beam spectrophotometer at 250 nm, without derivatization or additional elution. With the use of 2 carrier/self-eluting solutions (0.1 5M sodium acetate/acetic acid and 0.18M citric acid/K2HPO4) and a sample volume of 1000 microL, the sensor responds linearly in the range of 0.5-15 and 3-50 microg/mL with detection limits of 0.14 and 0.36 microg/mL for thiamine and ascorbic acid, respectively. When the method was applied to synthetic samples and pharmaceutical preparations, precise and accurate values were obtained.     

A study of method robustness for arsenic speciation in drinking water samples by anion exchange HPLC-ICP-MS

Regulating arsenic species in drinking waters is a reasonable objective, since the various species have different toxicological impacts. However, developing robust and sensitive speciation methods is mandatory prior to any such regulations. Numerous arsenic speciation publications exist, but the question of robustness or ruggedness for a regulatory method has not been fully explored. The present work illustrates the use of anion exchange chromatography coupled to ICP-MS with a commercially available "speciation kit" option. The mobile phase containing 2 mM NaH(2)PO(4) and 0.2 mM EDTA at pH 6 allowed adequate separation of four As species (As(III), As(V), MMAA, DMAA) in less than 10 min. The analytical performance characteristics studied, including method detection limits (lower than 100 ng L(-1) for all the species evaluated), proved the suitability of the method to fulfill the current regulation. Other parameters evaluated such as laboratory fortified blanks, spiked recoveries, and reproducibility over a certain period of time produced adequate results. The samples analyzed were taken from water utilities in different areas of the United States and were provided by the U.S. EPA. The data suggests the speciation setup performs to U.S. EPA specifications but sample treatment and chemistry are also important factors for achieving good recoveries for samples spiked with As(III) as arsenite and As(V) as arsenate.     

Study of the ESI-mass spectrometry ionization mechanism of Fischer carbene complexes

By means of deuterium-labeling experiments, we have carried out a systematic ESI-MS study to determine the mechanism of ESI ionization of alkenyl and alkynyl group 6 Fischer carbene complexes. These compounds can be ionized under ESI conditions only in the presence of additives such as hydroquinone (HQ) or tetrathiafulvalene (TTF). Our results demonstrate that in the ESI source an anion-radical is formed after the initial HQ- or TTF-mediated electron transfer to the metallic carbene complex. For alkenyl carbene complexes, this species evolves by extrusion of a hydrogen radical to form an allenylchromium anion that is detected as the [M - H](-) ion in the mass spectrum. The preference for this mechanistic pathway could be rationalized by DFT calculations. In the case of alkynyl carbene complexes, experiments combining deuterated substrate, additive, and solvent demonstrate that the previously proposed allene-anion carbene complex is not formed. Instead, the H transfer from the ethoxy group in the anion radical, followed by extrusion of a hydrogen radical, leads to an allenyl anion that is detected in the ESI-MS as [M - H - CO](-).     

Electrochemical monitoring of indigo preparation using Maya’s ancient procedures

The preparation of indigo from Indigofera suffruticosa following the procedures attributed to ancient Mayas was electrochemically monitored using the voltammetry-of-microparticles approach. The mechanism formation of indigotin and indirubin from its precursors, indican and isatan, is discussed. Comparison of voltammetric profiles for differently prepared and commercial indigos and genuine Maya Blue samples suggests that the preparation procedure of indigo changed during the Late Classical Maya period. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.