Investigations in the 1,2,4-triazole series

To select a method for the synthesis of the previously difficulty accessible 5-bromo-1-phenyl-1,2,4-triazole (I) and 1-phenyl-1,2,4-triazoline-5-thione (II), a MO LCAO calculation has been carried out in Huckel's approximation of the energies of the radical, electrophilic, and nucleophilic localization on the various carbon atoms of 1-phenyl-1,2,4-triazole (III). In accordance with this calculation, the required compounds have been obtained in good yields by reactions taking place by a radical mechanism: I by bromination with bromosuccinimide and II by the direct thionation of III. The high reactivity of the bromine atom in position 5 has been noted.For part VIII, see [1].     

Ion exchange in dimethylsulfoxide media. I

Summary Distribution ratios between Dowex 50 W-X 8 resin and DMSO-H₂O-HCl systems have been determined for Mg, Ca, Sr, Ba, Ga, In, Sn(II) and Pb(II) as a function of both DMSO content and HCl-molarity. At high DMSO concentrations and high HCl concentrations theD values for all metal ions were not much different from those in corresponding aqueous systems. However, at lower and intermediate HCl concentrations (0.10 to 0.60M) D values differed greatly from those in aqueous systems, especially in the range from 20 to 50 mole% DMSO. Maxima in the logD vs. mole% DMSO plots at constant HCl concentrations were obtained for all cations except Sn(II) and Pb(II). Separation procedures for various pairs and combinations of cations seem feasible in DMSO-media [e. g., Ga/In and Sn(II)/Pb(II)] and the DMSO-water system is suggested as a very promising novel solvent medium for ion exchange separations.

---

Zusammenfassung Für Mg, Ca, Sr, Ba, Ga, In, Sn(II) und Pb(II) wurden die Verteilungsverhältnisse zwischen Dowex 50 W-X 8 und Dimethylsulfoxid—Wasser—Salzsäure in Abhängigkeit vom DMSO-Gehalt und der Salzsäuremolarität bestimmt. Bei hohen DMSO-Konzentrationen und hohen HCl-Konzentrationen unterscheiden sich die Verteilungskoeffizienten (D) aller Metallionen nicht sehr von denen in entsprechenden wäßrigen Systemen. Aber bei niederen und mäßigen HCl-Konzentrationen (0,10-bis 0,60-m) istD sehr verschieden gegenüber wäßrigen Systemen, besonders bei Anwesenheit von 20 bis 50 Mol-% DMSO. Trägt man logD gegen Mol-% DMSO bei konstanter HCl-Konzentration auf, so erhält man für alle Metalle außer Sn(II) und Pb(II) Maxima. Trennungsverfahren für verschiedene Ionenpaare und -gemische scheinen in DMSO-hältigem Plasma durchführbar zu sein, z. B. Ga/In und Sn(II)/Pb(II). Wäßrige DMSO-Systeme sind neue, vielversprechende Lösungsmittel für Trennungen mit Hilfe von Ionenaustauschern.

     

Beiträge zur Gewinnung von Hirudin,der Wirksubstanz des medizinischen Blutegels (Hirudo medicinalis L.)

Zusammenfassung Bei den vorliegenden Untersuchungen wurde Hirudin, die blutgerinnunghemmende Wirksubstanz von Hirudo medicinalis L., dadurch gewonnen, daß man Blutegel physiologische Kochsalzlösung, mit oder ohne Zusatz von roten Blutkörperchen, saugen ließ und den Darminhalt künstlich entnahm. Außer dem Darminhalt enthält auch die Futterrestlösung Hirudin, wodurch bewiesen wurde, daß der Egel diesen Wirkstoff auch in die Bißwunde abgibt. Das angereicherte Rohhirudin wurde auf seine gerinnunghemmende Wirkung mit Kaninchenblut und Pferdeblut getestet und seine Antithrombinwirkung, Wirkung auf die Rekalzifikationszeit, Prothrombinzeit und Thrombingerinnungszeit von Oxalatplasma untersucht. Die Untersuchungen zeigen, daß die II. Phase der Blutgerinnung beeinflußt wird. Der Temperatureinfluß (100°, 70° und 37°) auf Lösungen der Wirksubstanz wurde untersucht, ebenso die Wirkung angereicherter Rohprodukte auf das lebende Kaninchen. Bei wiederholter Injektion trat kein anaphylaktischer Schock auf.Die Reinigung des angereicherten Rohproduktes durch Papierelektrophorese wird beschrieben.Herrn Prof. Dr.A. Wacek zum 60. Geburtstag mit den besten Wünschen gewidmet (O. H.).     

A new method for the synthesis of CF3-containing aminovinyl ketones

A new method for the synthesis of aminovinyl trifluoromethyl ketones was developed. The method is based on the reactions of 4-sulfonyl-1,1,1-trifluorobut-3-ene-2,2-diols with various alkyl-, aryl-, dialkyl-, and alkylarylamines. The stereochemistry of the compounds obtained was studied.     

Electroviscous Effect in Dilute Suspensions of Alumina

A study on the electroviscous effect of alumina suspensions has been made. At the low volume fraction of the particles studied here only a first-order effect was detected. Ubbelohde-type capillary viscometers have been used. A simple method to determine the hydrodynamic constant k(1) has been proposed. The experimental primary electroviscous coefficients corresponding to different electrolyte concentrations have been compared with two different theoretical approachs (I. G. Watterson, and L. R. White, J. Chem. Soc. Faraday Trans. 2 77, 1115 (1981); F. J. Rubio-Hernández, E. Ruiz-Reina, and A. I. Gómez-Merino, J. Colloid Interface Sci. 206, 334 (1998)) and the results suggest that the presence of a dynamic Stern layer plays a certain role in this effect. Copyright 2000 Academic Press.     

Mass spectrometric study of the pyrolysis of perfluorinated compounds of composition C6F12-C9F20, containing perfluoroisopropyl groups

The primary and final products arising from the pyrolysis of perfluoro-2,4-dimethyl-3-ethylpentane, perfluoro-3-isopropyl-4-methyl-2-pentene, perfluoro-2-methyl-3-isopropyl-2-pentene, perfluoro-2,4-dimethyl-3-heptene, and perfluoro-4-methyl-2-pentene have been studied using low-energy mass spectrometry and chromatography-mass spectrometry. Thermal decomposition of hexafluoropropene oligomers, containing perfluoroisopropyl groups attached to a double bond, occurs via loss of a radical pair to form perfluorodienes, as well as via abstraction of a hexafluoropropene molecule from the iso-C₃F₇ group. A correlation between the principal fragmentation pathway observed under electron impact and the primary process in the main thermolysis pathway was detected only in the case of perfluoro-4-methyl-2-pentene and perfluoro-2,4-dimethyl-3-heptene, which are capable of cleavage of^.CF₃ and^.C₂F₅ radicals, respectively, to give a single possible allyl radical structure.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1037–1041, May, 1990.     

NMR investigation of the solubility of some lubricants in rigid and in impact modified PVC

The solubility behaviour of two paraffin-waxes and two monoglyceride-esters normally used as lubricants in PVC-formulations have been studied with wide-line NMR for rigid and for impact modified PVC. It has been shown that the investigated lubricants have limited solubility in PVC. In the impact modified product, the monoglyceride-esters are partly dissolved in the elastomer phase and partly in the PVC-phase. The paraffin-waxes have limited solubility in the elastomer and in the PVC-phases, and a considerable amount forms a separate phase.     

Synchronization of signal sampling with liquid pulsation in systems with peristaltic pumps

Method and electronic circuitry are described for synchronization of analytical signal sampling with pulsation of liquid flow in systems with a peristaltic pump. The technique is illustrated for cathodic stripping voltammetry of manganese.     

Acidity and activity of H-mordenite in m-xylene isomerization

The dependence of the activity of H-mordenites prepared from a natural mordenite on the nature and strength of the acid groups present was studied. The superior catalytic activity and stability of the H(Ag)–MOR zeolite compared with other H-forms is explained on the basis of NH₃ adsorption and IR measurements.

---

H-, . H(Ag)–MOP H- NH₃ .

     

Molecular structures of acetylene derivatives of tin: Part IV. Gas-phase electron-diffraction study of tetraethynyltin,Sn(CCH)4, and triethynyltin iodide,ISn(CCH)3

The geometrical parameters of tetraethynyltin and triethynyltin iodide have been determined by gas-phase electron diffraction. Triethynyltin iodide was present as an admixture in both the tetraethynyltin samples studied. Because the samples differed significantly in percentage of the iodide (17.4 ± 4.0 and 47.1 ± 3.5 mol %, in samples A and B, respectively), it was possible to determine the structures of both molecules to a sufficient degree of accuracy.The r_α, structures were solved by the least-squares treatment of the molecular intensities, using mean amplitudes and shrinkage corrections calculated from the force fields of a number of tin derivatives.The T_d-symmetry model of Sn(CCH)₄ was refined to give the following parameters: Sn-C, 2.068(5); CC, 1.228(8); CH, 1.079(51). The structural parameters for ISn(CCH)₃ (on the basis of the C_3v model with linear Sn-CC-H fragments) are as follows: Sn-I, 2.646(4); Sn-C, 2.062(17); CC, 1.226(6); ∠ISnC 108.0(2.8). (The thermal average bond distances, r_g, are given in Å, and the valence angle, rα, in degrees; the values in paren- theses are three times the standard deviations, 3σ.)The Sn-C bonds in Sn(CCH)₄, and ISn(CCH)₃ are shorter than the corresponding bonds in the monoethynyltin derivatives, Me₃SnCCH and Me₃SnCCSnMe₃. The SnI bond in ISn(CCH)₃ is noticeably shorter than those in stannane iodide and trimethylstannane iodide.