Untersuchungen über die Quellung und Löslichkeit hochmolekularer Stoffe

Zusammenfassung Das Verhalten von 17 hochmolekularen Stoffen in 64 organischen Lösungsmitteln wird untersucht. Eine Ordnung des großen Beobachtungsmaterials gelingt, wenn man den Zustand der Systeme (z. B. Lösung oder Quellung) als Funktion der Oberflächenspannung und der dielektrischen Funktion ²/ der Lösungsmittel darstellt.     

Vinyl sulfones in solid-phase synthesis: preparation of 4,5,6,7-tetrahydroisoindole derivatives

The preparation of functionalized 4,5,6,7-tetrahydroisoindole via a traceless solid-phase sulfone linker strategy is described. Thermolytic extrusion of SO(2) from polymer-bound 3-(phenylsulfonyl)-3-sulfolene (7) generated polymer-bound 2-(phenylsulfonyl)-1,3-butadiene (9) in situ which underwent Diels--Alder cycloaddition with various dienophiles to furnish vinyl sulfone resins 10-14. To complete a traceless linker cleavage strategy, (p-tolysulfonyl)methyl isocyanide or ethyl isocyanoacetate was employed to react with the vinyl sulfone moiety to liberate functionalized 4,5,6,7-tetrahydroisoindole products from the resin. Using this chemistry, nine tetrahydroisoindole derivatives (6, 15-22) were prepared in 32-41% overall yields from polystyrene/divinylbenzene sulfinate 1.     

Formation of oxygen atoms in the reaction of chlorine atoms with ozone

Oxygen atoms are detected by NO + O + M chemiluminescence as a secondary product of the reaction between Cl and O₃. The mechanism Cl + O₃ → ClO + O₂(¹Σ⁺_g), O₂(¹Σ⁺_g) + O₃ → O₂ + O₂ + O is proposed to account for the oxygen atom formation. The branching ratio to the O₂(¹Σ⁺_g) product in the reaction of Cl with O₃ is estimated to be in the range (0.1–0.5) x 10^?2.     

Micromechanics of fatigue crack propagation in glassy thermoplastics

By the aid of the optical interference method the size of the craze zone at the crack tip has been measured during fatigue crack propagation (FCP) in two glassy thermoplastics thus giving a basis to re-examine proposed models. In contrast to previous assumptions it has been found, that in PMMA of high molecular weight crack propagation occurs only during a short interval of the loading cycle when the fibrils are stretched most severely and it is not limited by crack tip blunting; between the dimensions of the craze zone and the crack advance per cycle which is also reflected by markings on the fracture surface no simple correlation has been found. In PVC first the craze grows continuously during many loading cycles up to its final size and then the crack propagates by a jump separating the craze zone only partly. Thus at all stress intensity levels investigated the length of the final craze zone has been found to be distinctly larger than the jump spacing on the fracture surface. By aid of SEM-photography it is shown that in PVC during FCP cracking occurs by separation of fibrils instead of void coalescence.     

Lignocellulose degradation in mushroom composts

The edible mushroomAgaricus bisporus is grown commercially on composted manure/straw mixtures. However, this proven composting procedure is wasteful of raw materials. A nonmanure compost was developed (Smith, 1980) with two main aims:

1. To conserve raw materials, while still producing a compost favoringAgaricus bisporus colonization and giving an economic yield of mushrooms.
2. To speed up composting, hence making more efficient use of labor, farm equipment, and buildings.

A “conservation compost” (wheat straw, bran, whey, urea, peat, and gypsum) is ready for inoculation with mushroom mycelium (spawning) after 7 d preparation, i.e., 2 d pre-wetting of straw, then 4–5 d composting under controlled conditions. Whereas a traditional manure/wheat straw compost is produced by composting in windrows (8–11 d) followed by a controlled pasteurization phase (5–7 d). In the preparation of a traditional mushroom compost, as much as 60% of the initial dry matter is lost by microbial degradation prior to spawning. By shortening the composting process to 7 d conservation of cellulose and hemicellulose is achieved with only some 30% loss in dry matter. Straw hemicelluloses are degraded much quicker than cellulose during composting. Hence, the measurable extracellular laminarinase and xylanase activities of the compost microflora appear much greater than their cellulase activities at this period in both composts. A peak in laminarinase and xylanase activity after 48 h in manure compost corresponds with the increase in microbial populations. A pronounced increase in thermophilic bacterial and actinomycete populations occurs in “conservation composts” as readily available soluble carbohydrates are assimilated. Initially, this results in higher uniform compost temperatures (60?C+) and leads to a reduced thermophilic fungal population (10³ viable propagules g^-1 dry wt compost), which may explain the lowered enzyme activities found in the “conservation composts” and thus the reduced degradation of lignocellulose. The compost microflora showed no laccase activity during composting, and little if any lignin was degraded. However,Agaricus bisporus does possess a moderately active lignolytic system and a strongly active cellulolytic system. Subsequent experiments have shown that increased mushroom yields may be obtained from these composts when urea is replaced by chicken manure as the nitrogen supplement (Smith, 1983); this has not affected compost “selectivity” for mushroom growth, dry matter loss, or the duration of the process. Although yield of mushrooms, based on compost weights at spawning tend to be lower than what would be expected from traditional composts, yield calculated on the basis of weight of starting materials is usually much higher.     

Seawater—A test of multicomponent electrolyte solution theories. II. Enthalpy of mixing and dilution of the major sea salts

In a continuing effort to predict the physicochemical properties of seawater from the properties of single aqueous electrolyte solutions, the pairwise heats of mixing at constant molal ionic strength,I=1.0 ional, have been determined for the six possible pairs of salts from the set (NaCl, Na₂SO₄, MgCl₂, MgSO₄) at 30°C. In addition, heats of dilution for two aqueous solutions formed from these salts and havingI=1.0 ional have been determined at 30°C. In order to present the most thermodynamically consistent results, it was found necessary to apply a correction term to the relative apparent equivalent enthalpies given in the literature at 30°C. These correction terms derived from a consideration of published results on heats of dilution at very low concentrations. Further, in order to make predictions for seawater at 25°C, it was deemed desirable to refit existing heat-capacity data. The heats relative apparent equivalent enthalpies for the two mixtures mentioned as well as for seawater. The estimates are based on the theoretical equation of Reilly and Wood for charge-asymmetric mixtures which derives from the work of Friedman. In the most applicable cases, the estimates agree with experimental relative apparent equivalent enthalpies to within 5%. In general, the results substantiate the theoretical equation.Taken in part from the Ph.D. dissertation of W. H. Leung, University of Miami, Miami, Florida 33149.     

Zur Kinetik der Spinellbildung von β-Ga2O3 mit zweiwertigen Oxiden. IV. Reaktionen 2. Art im System CoO-β-Ga2O3

The solid-state reaction of the second kind in a sandwich type diffusion couple of $\text{Co}{}_{\mathrm{1?z}}\text{Ga}{}_{\mathrm{<mtext>2z</mtext><mtext>3</mtext>}}\text{O}$ and β-Ga₂O₃ has been investigated between 1249 and 1550°C in air. The quantity z, which corresponds to the saturation concentration of β-Ga₂O₃ in CoO, was determined as a function of temperature by X-ray methods and the optical microscope; the homogeneity range of the spinel phase $\text{Co}{}_{\mathrm{1?y}}\text{Ga}{}_{\mathrm{<mtext>2+</mtext><mtext>2y</mtext><mtext>3</mtext>}}\text{O}{}_4$ was investigated also. The growth of the thickness of the reaction layer follows a parabolic rate law; the activation energy is 71.6 kcal/mole. A comparison of reaction rate constants of the first and second kind in connection with experimental results, achieved with a modified marker technique, leads to confirmation of the Wagner mechanism for the formation of CoGa₂O₄ spinel as supposed before by Laqua. Reaction rate constants of the second kind, calculated from interdiffusion profiles in CoO-β-Ga₂O₃ diffusion couples, are in good agreement with experimental values. Presented data are used for estimating interdiffusion coefficients for the CoO-β-Ga₂O₃ system according to theoretical aspects developed by Pelton, Schmalzried, and Greskovich.     

Comparison of various calibration techniques for the direct spectroscopical analysis of SiC powders

Techniques for the direct analysis of powdered advanced ceramics provide an advantageous alternative to methods using wet digestion in sample preparation. The direct spectrochemical methods based on electrothermal vaporization (ETV-ICP-OES, solid-ETV-AAS, etc.) show a great similarity to the classical method of d. c. arc excitation. The calibration procedure is the major difficulty of all techniques applied for direct solid sample analysis, as there is a lack of suitable reference materials of ceramics. Consequently, it was necessary to verify various possibilities of preparation and application of model calibration samples. The results of such a calibration are compared with those using within-laboratory standards.     

Computer simulation of ion recombination in irradiated nonpolar liquids

A review of the results of computer simulation of the diffusion controlled recombination of ions is presented. The ions generated in clusters of two and three pairs of oppositely charged ions were considered. The recombination kinetics and the ion escape probability at infinite time with and without external electric field have been computed. These results are compared with the calculations based on the single-pair theory.     

A continuous flow instrument with flow regulation and automatic sensitivity range adaptation for the determination of atmospheric H2S

A set-up for continuous measurements of atmospheric H₂S concentrations in the range between 0.138 g/m³ and 17.5 g/m³ is described. All flows are regulated by flow sensors which are connected to the respective pump by a feed back circuit. The instrument is working in two sensitivity ranges. One is provided for low H₂S concentrations (lower than 1.75 g/m³) and the other for higher levels (higher than 1.75 g/m³). During continuous measurements the set-up enables an automatic adaptation of one of the sensitivity ranges to ambient H₂S concentrations. The critical step of absorption of gaseous H₂S into the liquid phase of the continuous flow system could be stabilised by the development of a new fluid level control system. After numerous test measurements under laboratory conditions the instrument was tested for the first time in June 1993 during field measurements in the tropics. These measurements took place in the environment of natural and industrial sources of H₂S in the vicinity of Salvador da Bahia in Brazil. Data are presented which prove the ability of the instrument.Dedicated to Professor D. Dieter Klockow on the occasion of his 60th birthday