Microwave‐assisted synthesis and characterization of biodegradable block copolyesters based on poly(3‐hydroxyalkanoate)s and poly(D,L‐lactide)

Microwave (MW)‐assisted ring‐opening polymerization (ROP) provides a rapid and straightforward method for engineering a wide array of well‐defined poly(3‐hydroxyalkanoate)‐b‐poly(D,L ‐lactide) (PHA‐b‐PLA) diblock copolymers. On MW irradiation, the bulk ROP of D,L ‐lactide (LA) could be efficiently triggered by a series of monohydroxylated PHA‐based macroinitiators previously produced via acid‐catalyzed methanolysis of corresponding native PHAs, thus affording diblock copolyesters with tunable compositions. The dependence of LA polymerization on temperature, macroinitiator structure, irradiation time, and [LA]₀/[PHA]₀ molar ratio was carefully investigated. It turned out that initiator efficiency values close to 1 associated with conversions ranging from 50 to 85% were obtained only after 5 min at 115 °C. A kinetic investigation of the MW‐assisted ROP of LA gave evidence of its “living”/controlled character under the experimental conditions selected. Structural analyses and thermal properties of biodegradable diblock copolyesters were also performed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Gold-Catalyzed Regioselective Dimerization of Aliphatic Terminal Alkynes

A gold-catalyzed regioselective homodimerization of aliphatic terminal alkynes is described. Bulky and less Lewis acidic tBuXPhosAuNTf(2) is the preferred catalyst, and the additive, anhydrous NaOAc, substantially facilitates the reaction.     

Designing liquid-crystalline dendronised hexa-adducts of [60]fullerene via click chemistry

ABSTRACT

Liquid-crystalline [60]fullerodendrimers were constructed via click chemistry based on the reaction between hexa-adducts of [60]fullerene (C₆₀) bearing 12 azide groups and alkyne-terminated cyanobiphenyl dendrons of first- and second-generation. The structure of all the new compounds was confirmed by IR, UV, ¹H and ¹³C NMR spectroscopies and mass spectrometry. The mesomorphic properties were studied by polarised optical microscopy, differential scanning calorimetry and small-angle X-ray scattering. The hexa-adduct of C₆₀ functionalised with the first-generation dendrons gave rise to the formation of a smectic A phase and a rectangular columnar phase (c2mm symmetry) while the hexa-adduct of C₆₀ decorated with the second-generation dendrons displayed only a rectangular columnar phase (c2mm symmetry). Our results show that the hexa-adduct of C₆₀ is a unique synthetic platform for the design of fullerodendrimers and dendronised materials.     

Adhesive fracture of heterogeneous interfaces

We have studied the effect of interface heterogeneity on fracture, at both local and global scales. The single cantilever beam adhesion test was used to investigate interfacial fracture between polycarbonate plates and an elastic/fragile epoxy adhesive. Two surface treatments were applied to a (given) polycarbonate plate giving zones of strong and weak adhesion parallel to the crack direction. Calculated fracture energies differed from those expected from a simple rule-of-mixtures. A perturbation method, proposed by Rice, was used and results compared with crack fronts observed in situ. The technique was applied successfully but the difference in values of stress intensity factor between the zones was found substantially different from the experimental value. In an attempt to explain discrepancies, specimens with discontinuous crack fronts (adhesive and/or plates severed along the strong/weak adhesion frontier) were tested. Good agreement was found with the rule-of-mixtures predictions raising questions about the role of crack front continuity in load transfer.     

Heavy-Atom Tunneling in Semibullvalenes: How Driving Force,Substituents, and Environment Influence the Tunneling Rates

The Cope rearrangement of selectively deuterated isotopomers of 1,5-dimethylsemibullvalene 2 a and 3,7-dicyano-1,5-dimethylsemibullvalene 2 b were studied in cryogenic matrices. In both semibullvalenes the Cope rearrangement is governed by heavy-atom tunneling. The driving force for the rearrangements is the small difference in the zero-point vibrational energies of the isotopomers. To evaluate the effect of the driving force on the tunneling probability in 2 a and 2 b , two different pairs of isotopomers were studied for each of the semibullvalenes. The reaction rates for the rearrangement of 2 b in cryogenic matrices were found to be smaller than the ones of 2 a under similar conditions, whereas differences in the driving force do not influence the rates. Small curvature tunneling (SCT) calculations suggest that the reduced tunneling rate of 2 b compared to that of 2 a results from a change in the shape of the potential energy barrier. The tunneling probability of the semibullvalenes strongly depends on the matrix environment; however, for 2 a in a qualitatively different way than for 2 b .     

Surface modifications of electrode materials for lithium-ion batteries: status and trends

The research on the electrodes of Li-ion batteries aims to increase the energy density and the power density, improve the calendar and the cycling life, without sacrificing the safety issues. A constant progress through the years has been obtained owing to the surface treatment of the particles, in particular the coating of the particles with a layer that protects the core region from side reactions with the electrolyte, prevents the loss of oxygen, and the dissolution of the metal ions in the electrolyte, or simply improve the conductivity of the powder. The purpose of the present work is to review the different surface modifications that have been tried in the past for the different electrodes that are currently commercialized, or considered as promising, including the three families of positive electrodes (lamellar, spinel, and olivine families) and the three negative electrodes (carbon, Li₄Ti₅O₁₂, and silicon). The role of the different coats used to improve either the surface conductivity, or the thermal stability, or the structural integrity is discussed. The limits in the efficiency of these different coats are also analyzed along with the understanding of the surface modifications that have been proposed.     

Maximizers for the Stein–Tomas Inequality

We give a necessary and sufficient condition for the precompactness of all optimizing sequences for the Stein–Tomas inequality. In particular, if a well-known conjecture about the optimal constant in the Strichartz inequality is true, we obtain the existence of an optimizer in the Stein–Tomas inequality. Our result is valid in any dimension.