A novel layered oxysulfide intergrowth compound Sr4Mn2Cu5O4S5 containing a fragment of the alpha-Cu2S antifluorite structure

Sr4Mn2Cu5O4S5 contains manganese oxide sheets separated by unusual antifluorite-type Cu3S3 layers in which copper(I) ions are distributed over three- and four-coordinates sites in a similar fashion to in alpha-Cu2-xS and suggestive of high two-dimensional copper ion mobility.     

Development of a multiplexed microbioreactor system for high-throughput bioprocessing

A multiplexed microbioreactor system for parallel operation of multiple microbial fermentation is described. The system includes miniature motors for magnetic stirring of the microbioreactors and optics to monitor the fermentation parameters optical density (OD), dissolved oxygen (DO), and pH, in-situ and in real time. The microbioreactors are fabricated out of poly(methylmethacrylate)(PMMA) and poly(dimethylsiloxane)(PDMS), and have a working volume of 150 microl. Oxygenation of the cells occurs through a thin PDMS membrane at the top of the reactor chamber. Stirring is achieved with a magnetic spin bar in the reactor chamber. Parallel microbial fermentations with Escherichia coli are carried out in four stirred microbioreactors and demonstrate the reproducible performance of the multiplexed system. The profiles for OD, DO, and pH compare favourably to fermentations performed in bioreactor systems with multiple bench-scale reactors. Finally, the multiplexed system is used to compare two different reactor designs, demonstrating that the reproducibility of the system permits the quantification of microbioreactor performance.     

Oxidative dearomatization of phenols and anilines via lambda(3)- and lambda(5)-iodane-mediated phenylation and oxygenation

Treatment of 2-methylphenols with chloro(diphenyl)-lambda(3)-iodane led to their regioselective dearomatizing 2-phenylation into cyclohexa-2,4-dienone derivatives via a proposed ligand coupling reaction. In the same vein of investigation, treatment of 2-methylanilines with the lambda(5)-iodane 2-iodoxybenzoic acid IBX reagent led to their regioselective dearomatization into previously undescribed ortho-quinol imines.     

Effect of Groundwater Composition on Arsenic Detection by Bacterial Biosensors

A luminescent bacterial biosensor was used to quantify bioavailable arsenic in artificial groundwater. Its light production above the background emission was proportional to the arsenite concentration in the toxicologically relevant range of 0 to 0.5 μM. Effects of the inorganic solutes phosphate, Fe(II) and silicate on the biosensor signal were studied. Phosphate at a concentration of 0.25 g L⁻¹ phosphate slightly stimulated the light emission, but much less than toxicologically relevant concentrations of the much stronger inducer arsenite. No effect of phosphate was oberved in the presence of arsenite. Freshly prepared sodium silicate solution at a concentration of 10 mg L⁻¹ Si reduced the arsenite-induced light production by roughly 37%, which can be explained by transient polymerization leading to sequestration of some arsenic. After three days of incubation, silicate did not have this effect anymore, probably because depolymerization occurred. In the presence of 0.4 mg L⁻¹ Fe(II), the arsenite-induced light emission was reduced by up to 90%, probably due to iron oxidation followed by arsenite adsorption on the less soluble Fe(III) possibly along with some oxidation to the stronger adsorbing As(V). Addition of 100 μM EDTA was capable of releasing all arsenic from the precipitate and to transform it into the biologically measurable, dissolved state. The biosensor also proved valuable for monitoring the effectiveness of an arsenic removal procedure based on water filtration through a mixture of sand and iron granules.     

Efficient synthesis of bromocyclopenta[b] indoles via a bromination ‐ reduction sequence

Substituted cyclopenta[b]indoles are selectively brominated in good yields with excess pyridine ‐ Br₂ charge‐transfer complex (PyBr₂) in a one‐pot reaction to provide 5 and/or 7‐bromoindoles. The mechanism involves the formation of an adduct (addition of bromine on the central double bond) which is subsequently reduced in situ with Zn and AcOH. A variety of functional groups in the cyclopentyl and the benzenoid rings are tolerated.     

Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Novel methods for the synthesis of 5-substituted-3-carboxy-2,5- and 4,5-dihydrothiophenes and 5-substituted 2- and 3-sulfolenes

Various approaches to the syntheses of 5-substituted-3-carbomethoxy-2,5-dihydrothiophenes and their product sulfolenes, required as synthetic precursors for tangutorine, are described. An efficient route to 3,5-disubstituted-4,5-dihydrothiophenes and hence 3,5-disubstituted-2-sulfolenes by radical chemistry is also described.     

Design and characterization of libraries of molecular fragments for use in NMR screening against protein targets

We have designed four generations of a low molecular weight fragment library for use in NMR-based screening against protein targets. The library initially contained 723 fragments which were selected manually from the Available Chemicals Directory. A series of in silico filters and property calculations were developed to automate the selection process, allowing a larger database of 1.79 M available compounds to be searched for a further 357 compounds that were added to the library. A kinase binding pharmacophore was then derived to select 174 kinase-focused fragments. Finally, an additional 61 fragments were selected to increase the number of different pharmacophores represented within the library. All of the fragments added to the library passed quality checks to ensure they were suitable for the screening protocol, with appropriate solubility, purity, chemical stability, and unambiguous NMR spectrum. The successive generations of libraries have been characterized through analysis of structural properties (molecular weight, lipophilicity, polar surface area, number of rotatable bonds, and hydrogen-bonding potential) and by analyzing their pharmacophoric complexity. These calculations have been used to compare the fragment libraries with a drug-like reference set of compounds and a set of molecules that bind to protein active sites. In addition, an analysis of the overall results of screening the library against the ATP binding site of two protein targets (HSP90 and CDK2) reveals different patterns of fragment binding, demonstrating that the approach can find selective compounds that discriminate between related binding sites.     

Structure activity relationship by NMR and by computer: a comparative study

There has recently been considerable interest in using NMR spectroscopy to identify ligand binding sites of macromolecules. In particular, a modular approach has been put forward by Fesik et al. (Shuker, S. B.; Hajduk, P. J.; Meadows, R. P.; Fesik, S. W. Science 1996, 274, 1531-1534) in which small ligands that bind to a particular target are identified in a first round of screening and subsequently linked together to form ligands of higher affinity. Similar strategies have also been proposed for in silico drug design, where the binding sites of small chemical groups are identified, and complete ligands are subsequently assembled from different groups that have favorable interactions with the macromolecular target. In this paper, we compare experimental and computational results on a selected target (FKBP12). The binding sites of three small ligands ((2S)1-acetylprolinemethylester, 1-formylpiperidine, 1-piperidinecarboxamide) in FKBP12 were identified independently by NMR and by computational methods. The subsequent comparison of the experimental and computational data showed that the computational method identified and ranked favorably ligand positions that satisfy the experimental NOE constraints.