Cu-Doped ZnO Nanoparticles for Non-Enzymatic Glucose Sensing

Copper-doped zinc oxide nanoparticles (NPs) Cu_xZn_1−xO (x = 0, 0.01, 0.02, 0.03, and 0.04) were synthesized via a sol-gel process and used as an active electrode material to fabricate a non-enzymatic electrochemical sensor for the detection of glucose. Their structure, composition, and chemical properties were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) and Raman spectroscopies, and zeta potential measurements. The electrochemical characterization of the sensors was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). Cu doping was shown to improve the electrocatalytic activity for the oxidation of glucose, which resulted from the accelerated electron transfer and greatly improved electrochemical conductivity. The experimental conditions for the detection of glucose were optimized: a linear dependence between the glucose concentration and current intensity was established in the range from 1 nM to 100 μM with a limit of detection of 0.7 nM. The proposed sensor exhibited high selectivity for glucose in the presence of various interfering species. The developed sensor was also successfully tested for the detection of glucose in human serum samples.     

Elongated Bacterial Pili as a Versatile Alignment Medium for NMR Spectroscopy

In NMR spectroscopy, residual dipolar couplings (RDCs) have emerged as one of the most exquisite probes of biological structure and dynamics. The measurement of RDCs relies on the partial alignment of the molecule of interest, for example by using a liquid crystal as a solvent. Here, we establish bacterial type 1 pili as an alternative liquid-crystalline alignment medium for the measurement of RDCs. To achieve alignment at pilus concentrations that allow for efficient NMR sample preparation, we elongated wild-type pili by recombinant overproduction of the main structural pilus subunit. Building on the extraordinary stability of type 1 pili against spontaneous dissociation and unfolding, we show that the medium is compatible with challenging experimental conditions such as high temperature, the presence of detergents, organic solvents or very acidic pH, setting it apart from most established alignment media. Using human ubiquitin, HIV-1 TAR RNA and camphor as spectroscopic probes, we demonstrate the applicability of the medium for the determination of RDCs of proteins, nucleic acids and small molecules. Our results show that type 1 pili represent a very useful alternative to existing alignment media and may readily assist the characterization of molecular structure and dynamics by NMR.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Analysis of the essential oil from aerial parts of Eupatorium cannabinum subsp. corsicum (L.) by gas chromatography with electron impact and chemical ionization mass spectrometry

Eupatorium cannabinum subsp. corsicum (L.), an aromatic plant, is an endemic subspecies from Corsica. The essential oil from aerial parts of E. cannabinum subsp. corsicum was studied by GC, GC/MS and 13C NMR. One hundred and forty-seven components were identified representing 93.6% of the total amount. The main constituents are germacrene D (28.5%), alpha-phellandrene (19.0%) and para-cymene (5.2%). A particularity of this essential oil is the presence of monoterpene esters derived from nerol, lavandulol, borneol, thymol and 8,9-dehydrothymol. These compounds have been investigated using GC/MS in different ionization modes like electron impact (EI), positive chemical ionization (PCI) and negative chemical ionization (NCI).     

Mechanistic Origin of the Vibrational Coherence Accompanying the Photoreaction of Biomimetic Molecular Switches

The coherent photoisomerization of a chromophore in condensed phase is a rare process in which light energy is funneled into specific molecular vibrations during electronic relaxation from the excited to the ground state. In this work, we employed ultrafast spectroscopy and computational methods to investigate the molecular origin of the coherent motion accompanying the photoisomerization of indanylidene–pyrroline (IP) molecular switches. UV/Vis femtosecond transient absorption gave evidence for an excited‐ and ground‐state vibrational wave packet, which appears as a general feature of the IP compounds investigated. In close resemblance to the coherent photoisomerization of rhodopsin, the sudden onset of a far‐red‐detuned and rapidly blue‐shifting photoproduct signature indicated that the population arriving on the electronic ground state after nonadiabatic decay through the conical intersection (CI) is still very focused in the form of a vibrational wave packet. Semiclassical trajectories were employed to investigate the reaction mechanism. Their analysis showed that coupled double‐bond twisting and ring inversions, already populated during the excited‐state reactive motion, induced periodic changes in π‐conjugation that modulate the ground‐state absorption after the non‐adiabatic decay. This prediction further supports that the observed ground‐state oscillation results from the reactive motion, which is in line with a biomimetic, coherent photoisomerization scenario. The IP compounds thus appear as a model system to investigate the mechanism of mode‐selective photomechanical energy transduction. The presented mechanism opens new perspectives for energy transduction at the molecular level, with applications to the design of efficient molecular devices.     

First examples of neutral rhenium(V) complexes with a novel semi-rigid ligand containing a P,N,N,S donor atom set: Synthesis,characterisation and crystal structure

A new PN₂S ligand, N-[2-(diphenylphosphino)phenyl]-2-[(S-trityl)acetylamino]ethanamide [Ph-P(Ph₂)N₂S(Trt)], was synthesised and reacted with Re^V precursors. The reaction of both tritylated and detritylated ligands with ReOCl₃(PPh₃)₂ gave the same expected neutral complex [ReO{Ph-P(Ph₂)N₂S}] (4) in good yield. An unexpected neutral and diamagnetic species, [ReN{Ph-P(Ph₂)N₂S(Trt)}] (5), has been isolated during the complexation of the tritylated ligand with ReNCl₂(PPh₃)₂. The complexes, characterized by classical spectroscopic methods and X-ray analysis for 4, are the first examples of neutral semi-rigid-PN₂S rhenium(V) complexes.     

An operando DRIFTS investigation into the resistance against CO2 poisoning of a Rh/alumina catalyst during toluene hydrogenation

CO(2) is a major contaminant of renewable H(2) derived from biomass fermentation. The effect of the presence of CO(2) on the activity of alumina-supported Pt and Rh catalysts used for the hydrogenation of toluene at 348 K was investigated. The use of operando diffuse reflectance spectroscopy (DRIFTS) was crucial in unravelling the changes in the nature and abundance of species adsorbed at the sample surface and relating those to the changes of catalytic activity. Rhodium supported on alumina was only partly deactivated by the introduction of CO(2) during the hydrogenation of toluene, contrary to the case of Pt/alumina. Rh was only partially covered by carbonyl species derived from CO(2) and it was shown that toluene could successfully compete with some of the linearly adsorbed carbonyls for adsorption. The alumina support stored many CO(2)-derived adsorbates (carbonates, hydrogenocarbonates, carboxylates) that could spill over to the metal and form carbonyl species even after the removal of CO(2) from the feed.     

Foam films in the presence of functionalized gold nanoparticles

Dry aqueous foams made of anionic surfactant (SDS) and spherical gold nanoparticles are studied by small angle X-ray scattering and by optical techniques. To obtain stable foams, the surfactant concentration is well above the critical micelle concentration. The specular reflectivity signal obtained on a very thin film (thickness 20 nm) shows that functionalized nanoparticles (17 nm typical size) are trapped within the film in the form of a single monolayer. In order to isolate the film behavior, investigations are made on a single film confined in a tube. The film thinning according to the ratio of functionalized nanoparticle and SDS micelles (1:1, 1:10, 1:100) is mainly governed by the structural arrangement of SDS micelles. In thick films, nanoparticles tend to form aggregates that disappear during drainage. In particular self-organization of nanoparticles (with different surface charge) inside the film is not detected.     

Phosphonated Near‐Infrared Fluorophores for Biomedical Imaging of Bone

The conventional method for creating targeted contrast agents is to conjugate separate targeting and fluorophore domains. A new strategy is based on the incorporation of targeting moieties into the non‐delocalized structure of pentamethine and heptamethine indocyanines. Using the known affinity of phosphonates for bone minerals in a model system, two families of bifunctional molecules that target bone without requiring a traditional bisphosphonate are synthesized. With peak fluorescence emissions at approximately 700 or 800 nm, these molecules can be used for fluorescence‐assisted resection and exploration (FLARE) dual‐channel imaging. Longitudinal FLARE studies in mice demonstrate that phosphonated near‐infrared fluorophores remain stable in bone for over five weeks, and histological analysis confirms their incorporation into the bone matrix. Taken together, a new strategy for creating ultra‐compact, targeted near‐infrared fluorophores for various bioimaging applications is described.     

In‐ and Out‐of‐Cavity Interactions by Modulating the Size of Ruthenium Metallarectangles

Cationic (arene)ruthenium‐based tetranuclear complexes of the general formula [Ru₄(η⁶‐p‐cymene)₄(μ‐N∩N)₂(μ‐OO∩OO)₂]⁴⁺ were obtained from the dinuclear (arene)ruthenium complexes [Ru₂(η⁶‐p‐cymene)₂(μ‐OO∩OO)₂Cl₂] (p‐cymene=1‐methyl‐4‐(1‐methylethyl)benzene, OO∩OO=5,8‐dihydroxy‐1,4‐naphthoquinonato(2?), 9,10‐dihydroxy‐1,4‐anthraquinonato(2?), or 6,11‐dihydroxynaphthacene‐5,12‐dionato(2?)) by reaction with pyrazine or bipyridine linkers (N∩N=pyrazine, 4,4′‐bipyridine, 4,4′‐[(1E)‐ethene‐1,2‐diyl]bis[pyridine]) in the presence of silver trifluoromethanesulfonate (CF₃SO₃Ag) (Scheme). All complexes 4 – 12 were isolated in good yield as CF₃SO salts, and characterized by NMR and IR spectroscopy. The host–guest properties of the metallarectangles incorporating 4,4′‐bipyridine and (4,4′‐[(1E)‐ethene‐1,2‐diyl]bis[pyridine] linkers were studied in solution by means of multiple NMR experiments (1D, ROESY, and DOSY). The largest metallarectangles 10 – 12 incorporating (4,4′‐[(1E)‐ethene‐1,2‐diyl]bis[pyridine] linkers are able to host an anthracene, pyrene, perylene, or coronene molecule in their cavity, while the medium‐size metallarectangles 7 – 9 incorporating 4,4′‐bipyridine linkers are only able to encapsulate anthracene. However, out‐of‐cavity interactions are observed between these 4,4′‐bipyridine‐containing rectangles and pyrene, perylene, or coronene. In contrast, the small pyrazine‐containing metallarectangles 4 – 6 show no interaction in solution with this series of planar aromatic molecules.