Liquid-crystalline bisadducts of [60]fullerene

A second-generation cyanobiphenyl-based dendrimer was used as a liquid-crystalline promoter to synthesize mesomorphic bisadducts of [60]fullerene. Liquid-crystalline trans-2, trans-3, and equatorial bisadducts were obtained by condensation of the liquid-crystalline promoter, which carries a carboxylic acid function, with the corresponding bisaminofullerene derivatives. A monoadduct of fullerene was also prepared for comparative purposes. All the compounds gave rise to smectic A phases. An additional mesophase, which could not be identified, was observed for the trans-2 derivative. The supramolecular organization of the monoadduct derivative is governed by steric constraints. Indeed, for efficient space filling, adequacy between the cross-sectional areas of fullerene (approximately 100 A(2)) and of the mesogenic groups (approximately 22-25 A(2) per mesogenic group) is required. As a consequence, the monoadduct forms a bilayered smectic A phase. The supramolecular organization of the bisadducts is essentially governed by the nature and structure of the mesogenic groups and dendritic core. Therefore, the bisadducts form monolayered smectic A phases. The title compounds are promising supramolecular materials as they combine the self-organizing behavior of liquid crystals with the properties of fullerene.     

Quantum chemical mass spectrometry: ab initio prediction of electron ionization mass spectra and identification of new fragmentation pathways

The electron ionization mass spectra of four organic compounds are predicted based on the results of quantum chemical calculations at the DFT/B3LYP/6‐311 + G* level of theory. This prediction is performed ‘ab initio’, i.e. without any prior knowledge of the thermodynamics or kinetics of the reactions under consideration. Using a set of rules determining which routes will be followed, the fragmentation of the molecules' bonds and the complete resulting fragmentation pathways are studied. The most likely fragmentation pathways are identified based on calculated reaction energies ΔE when bond cleavage is considered and on activation energies ΔE^? when rearrangements are taken into account; the final intensities of the peaks in the spectrum are estimated from these values. The main features observed in the experimental mass spectra are correctly predicted, as well as a number of minor peaks. In addition, the results of the calculations allow us to propose fragmentation pathways new to empirical mass spectrometry, which have been experimentally verified using tandem mass spectrometry measurements. Copyright © 2016 John Wiley & Sons, Ltd.     

Understanding the electron-stimulated surface reactions of organometallic complexes to enable design of precursors for electron beam-induced deposition

Standard practice in electron beam-induced deposition (EBID) is to use precursors designed for thermal processes, such as chemical vapor deposition (CVD). However, organometallic precursors that yield pure metal deposits in CVD often create EBID deposits with high levels of organic contamination. This contamination negatively impacts the deposit’s properties (e.g., by increasing resistivity or decreasing catalytic activity) and severely limits the range of potential applications for metal-containing EBID nanostructures. To provide the information needed for the rational design of precursors specifically for EBID, we have employed an ultra-high vacuum (UHV) surface science approach to identify the elementary reactions of organometallic precursors during EBID. These UHV studies have demonstrated that the initial electron-induced deposition of the surface-bound organometallic precursors proceeds through desorption of one or more of the ligands present in the parent compound. In specific cases, this deposition step has been shown to proceed via dissociative electron attachment, involving low-energy secondary electrons generated by the interaction of the primary beam with the substrate. Electron beam processing of the surface-bound species produced in the initial deposition event usually causes decomposition of the residual ligands, creating nonvolatile fragments. This process is believed to be responsible for a significant fraction of the organic contaminants typically observed in EBID nanostructures. A few ligands (e.g., halogens) can, however, desorb during electron beam processing while other ligands (e.g., PF₃, CO) can thermally desorb if elevated substrate temperatures are used during deposition. Using these general guidelines for reactivity, we propose some design strategies for EBID precursors. The ultimate goal is to minimize organic contamination and thus overcome the key bottleneck for fabrication of relatively pure EBID nanostructures.     

Mass spectrometric strategy for the characterization of lipooligosaccharides from Neisseria gonorrhoeae 302 using FTICR

The lipooligosaccharides (LOS) of Neisseria gonorrhoeae 302 were profiled using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). Using techniques developed in this laboratory, the topology and some of the linkages of the LOS were determined. Mass spectrometric analysis in the negative ion mode yielded a glycoform of the composition: Hex3 Hep2 Hxn1 PEA1 KDO2 DPLA. The composition was confirmed through exact mass measurements, which showed only a 2 ppm error between the exact mass and theoretical mass. Although the core structure has been postulated previously, the positioning of the three hexose moieties were in question for this particular strain of N. gonorrhoeae. Topology assignment was performed through collision-induced dissociation analysis of the O-deacylated glycoform in the negative ion mode followed by submission to the saccharide topology analysis tool (STAT) computer program, which confirmed the topology assignment. It was found that the three hexoses were added to the Hep[I] of the conserved core of N. gonorrhoeae in a linear fashion, while Hep[II] remains unbranched. Linkage position analysis was performed through application of a mild acid hydrolysis technique followed by collision-induced dissociation of the sodiated precursor ions, yielding a 1 --> 4 linkage between the terminating and penultimate hexoses.     

Utilization of MS3 spectra for the multicomponent quantification of diastereomeric N-acetylhexosamines

A rapid and accurate means of quantifying mixtures of diastereomeric N-acetylhexosamine monosaccharides using MS³ product ions is introduced. The method involves derivatizing the monosaccharides with [Co(DAP)₂Cl₂]Cl (where DAP is diaminopropane), and subjecting the derivatized products to collision-induced dissociation (CID) in a quadrupole ion trap mass spectrometer. Each diastereomer provides unique MS³ product ion abundances. The abundances for the pure monosaccharide standards are used in a system of equations in order to quantify mixtures of these diastereomers. Using the system of equations is quite advantageous, as it is the only mass spectrometric method that has been shown to successfully quantify mixtures of more than two isomers. The utility of the method is demonstrated by successfully quantifying various two and three component mixtures of the diastereomeric monosaccharides. Furthermore, the method is used to quantify the recovery of a single diastereomeric monosaccharide from an acidic resin. Although the multicomponent quantification method described herein is used to quantify mixtures of N-acetylhexosamine diastereomers, it could be applied to any group of isomers, provided distinguishing CID spectra are obtained. This is the first known report of utilizing MS³ product ions for quantification of structural isomeric mixtures.     

Application of affinity selection-mass spectrometry assays to purification and affinity-based screening of the chemokine receptor CXCR4

Affinity selection-mass spectrometry (AS-MS) is a sensitive technology for identifying small molecules that bind to target proteins, and assays enabled by AS-MS can be used to delineate relative binding affinities of ligands for proteins. 'Indirect' AS-MS assays employ size-exclusion techniques to separate target-ligand complexes from unbound ligands, and target-associated ligands are then specifically detected by liquid chromatography mass spectrometry. We report how indirect AS-MS binding assays with known reference control compounds were used as guideposts for development of an optimized purification method for CXCR4, a G-protein coupled chemokine receptor, for which we sought novel antagonists. The CXCR4 purification method that was developed was amenable to scale-up and enabled the screening of purified recombinant human CXCR4 against a large combinatorial library of small molecules by high throughput indirect AS-MS. The screen resulted in the discovery of new ligands that competed off binding of reference compounds to CXCR4 in AS-MS binding assays and that antagonized SDF1α-triggered responses and CXCR4-mediated HIV1 viral uptake in cell-based assays. This report provides a methodological paradigm whereby indirect AS-MS-based ligand binding assays may be used to guide optimal integral membrane protein purification methods that enable downstream affinity selection-based applications such as high throughput AS-MS screens.     

Separation and identification of highly fluorescent compounds derived from trans-resveratrol in the leaves of Vitis vinifera infected by Plasmopara viticola

A method for identification of highly fluorescent compounds in vine leaves infected by Plasmopara viticola was developed using reversed phase liquid chromatography with simultaneous diode array and fluorometric detection. Fluorescent compounds were extracted from leaves with a methanol-water mixture (70:30). Separation by HPLC was performed using a C(18) column and gradient elution with water-acetonitrile mixtures (20-80% of acetonitrile). The main unknown fluorescent compound was identified by line spectral comparison with a standard obtained by UV photoisomerization of trans-resveratrol glucoside, and its structure was confirmed by liquid chromatography-mass spectrometry. Identification and structural elucidation of the fluorescent compound in the leaves of Vitis vinifera allows early detection of Plasmopara viticola invasion.     

Preservice Elementary Teachers' Mathematics Content Knowledge and Teacher Efficacy

The purpose of this study was to examine the relationship between mathematics content knowledge and teacher efficacy during an elementary mathematics methods course. A positive moderate relationship between content knowledge and personal teaching efficacy was found, and this relationship was stable during the course. No relationship was found between content knowledge and outcome expectancy. Written artifacts were used to understand and elaborate on these findings. Those data suggest that prior learning experiences may help explain this relationship. Additionally, they suggest that preservice teachers with different levels of content knowledge may attend to different sources of information when making efficacy judgments about teaching.     

Spirobifluorene bridged Ir(III) and Os(II) polypyridyl arrays: synthesis, photophysical characterization, and energy transfer dynamics

The synthesis, characterization, photophysics, and time-dependent density functional theory (TD-DFT) calculations of spirobifluorene-bipyridine based iridium(III), osmium(II), and mixed Ir/Os complexes are presented. The preparation of the reference and mixed complexes proceeded step-by-step and microwave irradiation facilitated the complexation of osmium. The absorption of the target heterobimetallic derivative, Ir-L-Os, is described by linear combination of half of the absorption spectra of the homobimetallic analogues, Ir-L-Ir and Os-L-Os, due to the occurrence of mixed ligand and metal based transitions when the spirobifluorene-(bpy)(2) bridging ligand L is linked to the metal, confirming a negligible interaction between the substituted metallic chromophores. TD-DFT calculations on monometallic, homo- and hetero-bimetallic complexes fully disentangled the origin of the absorption features. Noticeably, in the mixed Ir-L-Os complex an almost quantitative energy transfer from the (3)Ir to the (3)Os MLCT state is occurring, with a rate constant of 4.1 × 10(8) s(-1) and nearly exclusively via a Dexter-type mechanism mediated by the orbitals of the spiroconjugated ligand. This result, together with the outcomes of the TD-DFT calculations, supports the existence of spiroconjugation and evidences the interesting role of this kind of bridge in the energy transfer dynamics of the arrays. In all the complexes, moreover, the ligand fluorescence is heavily quenched by energy transfer processes toward the metallic appended units; the rate constant is estimated in the order of 10(10) s(-1) for Ir-L-Os and higher than 10(12) s(-1) for the other complexes. In the heterometallic array, both at room temperature and at 77 K, all photons are thus funneled to the emissive Os (3)MLCT state, which acts as energy trap for the antenna cascade.     

Squaric acid is a suitable building-block in 4C-Ugi reaction: access to original bivalent compounds

The 4C-Ugi reaction requires an acidic component as one of the building-blocks. We report here the first use of squaric acid for this reaction to access original symmetrical compounds. The scope and conditions of the reaction were explored.