At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

Unzipping Nucleoside Channels by Means of Alcohol Disassembly

Gold nanoparticles capped with simple adenosine derivatives can form colloidal aggregates in nonpolar solvents. Theoretical calculations indicate the formation of organic channels by the supramolecular assembly of the nanoparticles by means of hydrogen bonds between the adenine moieties. The aggregates were only negligibly sensitive to nPrOH, iPrOH, and tBuOH, whereas some showed a similar response to MeOH and EtOH, and others showed high selectivity toward MeOH. DNA nucleoside derivatives (1‐(2‐deoxy‐β‐D ‐ribofuranosyl)‐5‐methyluracil and 2′,3′‐O‐isopropylideneadenosine) as well as thymine and other aromatic compounds such as pyrene derivatives (pyrene, 1‐chloropyrene, 1‐hydroxypyrene, (1‐pyrenyl)methanol, and 2‐hydroxynapthalene) did not induce disassembly of the nanoparticle aggregates. Data suggest that the nucleoside channels allow access to alcohols according to their size, and an efficient interaction between the alcohol and the adenine units destabilizes the hydrogen bonds, which eventually leads to nanoparticle disassembly.     

Chain transfer agents in cationic photopolymerization of a bis‐cycloaliphatic epoxide monomer: Kinetic and physical property effects

The effects of chain transfer agents (CTA) on cationic ring‐opening polymerization of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexane carboxylate (EEC) were explored. EEC was polymerized in the presence of various CTAs, and epoxide conversions monitored via Raman spectroscopy. Polymer films were prepared and analyzed by dynamic mechanical analysis. Many of the organic alcohols studied greatly enhanced epoxide polymerization rates and conversion levels. The gel fraction of polymer specimens decreased rapidly with increasing amounts of octanol (gel fraction >90% up to 0.3 equiv OH) but remained high with increasing amounts of 1,2‐propanediol (gel fraction >90% up to 0.6 equiv OH). Increasing the size of primary alcohols had little effect on the polymerization rates and conversions. The polymerization rate decreased with increasing alcohol substitution (1°>2°>3°). Acidic alcohols had very low impact on conversion and polymerization rates relative to the neat epoxy resin. The glass transition temperature was inversely related to the size and amount of CTA. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Monitoring the aggregation of single casein micelles using fluorescence microscopy

The aggregation of casein micelles (CMs) induced by milk-clotting enzymes is a process of fundamental importance in the dairy industry for cheese production; however, it is not well characterized on the nanoscale. Here we enabled the monitoring of the kinetics of aggregation between single CMs (30-600 nm in diameter) by immobilizing them on a glass substrate at low densities and subsequently imaging them with fluorescence microscopy. We validated the new method by a quantitative comparison to ensemble measurements of aggregation. Single-particle statistics allowed us to observe for the first time several heterogeneities in CM aggregation. We observed two types of CM growth: a slow increase in the size of CMs and a stepwise increase attributed to interactions between aggregates preformed in solution. Both types of growth exhibit a lag phase that was very heterogeneous between different CMs, suggesting significant differences in their composition or structure. Detailed size histograms of CMs during aggregation also revealed the presence of two distinct subpopulations with different growth amplitudes and kinetics. The dependence of these distinct nanoscale processes/parameters on aggregation conditions is not accessible to bulk measurements that report only ensemble-average values and may prove important to an in-depth understanding of CM aggregation.     

Palladium-catalyzed carbon-carbon bond-forming 1,2-ligand migration of organoalanes

A one-pot, two-step process that transforms terminal alkynes into ethyl methyl-substituted benzylic quaternary carbon centers is described. (E)-2,2-Disubstituted-1-alkenyldimethylalanes have been shown to participate in 1,2-alkyl migration from aluminum to carbon with concomitant arylation at the 2-position to furnish ethyl methyl-substituted benzylic quaternary carbon centers, when reacted intramolecularly with aryl halides and triflates in the presence of a Pd(0) catalyst. The protocol is initiated with Cp2ZrCl2-catalyzed methylalumination of terminal alkynes followed by palladium-catalyzed intramolecular arylation of the resulting (E)-2,2-disubstituted-1-alkenyldimethylalanes, leading to 1,2-methyl shift from aluminum to carbon. In that sequence, a total of three new C-C single bonds are made, and two of the three alkyl groups on Me3Al transferred to the substrate on vicinal carbons. This method was applied to a variety of substrates, and the mechanism was investigated by deuterium-labeling experiments, which revealed that protodealumination of the final dialkylaluminum triflate or halide intermediates by CH3CN results in the formation of the fourth bond in the course of the transformation.     

Photocatalytic coatings for environmental applications

A series of nano- and micronparticle-grade anatase and rutile titanium dioxide pigments have been prepared with various densities of surface treatments, particle size and surface area. Their photocatalytic activites have been determined in a series of paint films by FTIR, chalking, color, gloss change and weight loss after artifical weathering. The pigments have also been examined by rapid assessment methodologies using photodielectric microwave spectroscopy, 2-propanol oxidation and hydroxyl analysis. The microwave response under light and dark cycles provides an extended timescale probe of charge-carrier dynamics in the pigments. Pigment particle size, surface area and properties clearly play an important role in dispersion and any polymer-pigment interactions. Photooxidation studies on several types of paint films show a clear demarcation between nanoparticle- and pigmentary-grade titanium dioxide, with the former being more active because of their greater degree of catalytic surface activity. The photosensitivity of titanium dioxide is considered to arise from localized sites on the crystal surface (i.e. acidic OH), and occupation of these sites by surface treatments inhibits photoreduction of the pigment by ultraviolet radiation; hence, the destructive oxidation of the binder is inhibited. Coatings containing 2-5% by weight alumina or alumina and silica are satisfactory for general-purpose paints. If greater resistance to weathering is desired, the pigments are coated more heavily to about 7-10% weight. The coating can consist of a combination of several materials, e.g. alumina, silica, zirconia, aluminum phosphates of other metals. For example, the presence of hydrous alumina particles lowers van der Waals forces between pigments particles by several orders of magnitude, decreasing particle-particle attractions. Hydrous aluminum oxide phases appear to improve dispersibility more effectively than most of the other hydroxides and oxides. Coated nanoparticles are shown to exhibit effective light stabilization in various water- and oil-based paint media in comparison with conventional organic stabilizers. Hindered piperidine stabilizers are shown to provide no additional benefits in this regard, often exhibiting strong antagonism. The use of photocatalytic titania nanoparticles in the development of self-cleaning paints and microbiological surfaces is also demonstrated in this study. In the former case, surface erosion is shown to be controlled by varying the ratio of admixture of durable pigmentary-grade rutile (heavily coated) and a catalytic-grade anatase nanoparticle. For environmental applications in the development of coatings for destroying atmospheric pollutants such as nitrogen oxide gases (NO(X)), stable substrates are developed with photocatalytic nanoparticle-grade anatase. In this study, porosity of the coatings through calcium carbonate doping is shown to be crucial in the control of the effective destruction of atmospheric NO(X) gases. For the development of microbiological substrates for the destruction of harmful bacteria, effective nanoparticle anatase titania is shown to be important, with hydrated high surface area particles giving the greatest activity.     

Biological N Removal from Wastes Generated from Amine-Based CO2 Capture: Case Monoethanolamine

Large-scale amine-based CO₂ capture will generate waste containing large amounts of ammonia, in addition to contaminants such as the actual amine as well as degradation products thereof. Monoethanolamine (MEA) has been a dominant amine applied so far in this context. This study reveals how biological N removal can be achieved even in systems heavily contaminated by MEA in post- as well as pre-denitrification treatment systems, elucidating the rate-limiting factors of nitrification as well as aerobic and denitrifying biodegradation of MEA. The hydrolysis of MEA to ammonia readily occurred both in post- and pre-denitrification treatment systems with a hydraulic retention time of 7 h. MEA removal was ≥99?±?1 % and total nitrogen removal 77?±?10 % in both treatment systems. This study clearly demonstrates the advantage of pre-denitrification over post-denitrification for achieving biological nitrogen removal from MEA-contaminated effluents. Besides the removal of MEA, the removal efficiency of total nitrogen as well as organic matter was high without additional carbon source supplied.     

In search of a new class of stable nitroxide: synthesis and reactivity of a peri-substituted N,N-bissulfonylhydroxylamine

Acyclic bissulfonylnitroxides have never been isolated, and degrade through fragmentation. In an approach to stabilising a bissulfonylnitroxide radical, the cyclic, peri-substituted N,N-bissulfonylhydroxylamine, 2-hydroxynaphtho[1,8-de][1,3,2]dithiazine 1,1,3,3-tetraoxide (1), has been prepared by formal nitrogen insertion into the sulfur-sulfur bond of a sulfinylsulfone, naphtho[1,8-cd][1,2]dithiole 1,1,2-trioxide. The heterocyclic ring of 1 is shown to adopt a sofa conformation by X-ray crystallography, with a pseudo-axial hydroxyl group. N,N-Bissulfonylhydroxylamine 1 displays high thermal, photochemical and hydrolytic stability compared to acyclic systems. EPR analysis reveals formation of the corresponding bissulfonylnitroxide 2 upon oxidation of 1 with the Ce(IV) salts CAN and CTAN. Although 2 does not undergo fragmentation, it cannot be isolated, since hydrogen atom abstraction to reform 1 occurs in situ. The stability and reactivity of 1 and 2 are compared with the known cyclic benzo-fused N,N-bissulfonylhydroxylamine, N-hydroxy-O-benzenedisulfonimide (6), for which the X-ray data, and EPR of the corresponding nitroxide 10, are also reported for the first time.     

Sun-reactive Skin Type in 4912 French adults participating in the SU.VI.MAX study

Phototype classifications were initially developed in an attempt to predict the skin reactions of patients to phototherapy and are now widely used to advise individuals with regard to sun protection. A transversal study was conducted on the SU.VI.MAX cohort to estimate the frequency of sun-reactive skin features in a large, general adult population-based sample, and to describe the associations between these features. The data were collected 3 years after the beginning of the SU.VI.MAX nutritional intervention study on 4912 volunteers (2868 women aged 35-60 years and 2044 men aged 45-60 years). A multiple correspondence analysis was performed to study the associations between the features. The results showed that these features correspond to a one-dimensional phenomenon, which allowed us to establish a score to summarize skin sensitivity to sun exposure. Furthermore, we found a link between gender and phototype using the Césarini classification (phototype > or = IV: 37% of women, 47% of men). The analysis of the relationship with sun-reactive skin features and the score revealed the same trend. Phenotypic evaluation appears to be a good estimator of skin sensitivity to sun exposure for clinical screening or for use in research, and is easy to collect at a lower cost. Moreover, the sun sensitivity difference between gender should be considered in education about photoprotection.     

1,3-Dipolar Cycloadditions VI [1].Structure and Conformation of Cycloadducts from Reactions of C-Aryl-N-phenylnitrones with Substituted Cinnamic Acid Amides

Summary.  Studies on cycloadditions of C,N-diarylnitrones to cinnamic acid amides were carried out. The diastereoisomeric (I, II) and (in some cases) regioisomeric (III) cycloadducts obtained were characterized by spectroscopic and X-ray data. Conformational studies were carried out by molecular modelling. Received February 8, 2000. Accepted February 18, 2000