Analytical tools for identification of non-intentionally added substances (NIAS) coming from polyurethane adhesives in multilayer packaging materials and their migration into food simulants

Adhesives used in food packaging to glue different materials can provide several substances as potential migrants, and the identification of potential migrants and migration tests are required to assess safety in the use of adhesives. Solid-phase microextraction in headspace mode and gas chromatography coupled to mass spectrometry (HS-SPME-GC-MS) and ChemSpider and SciFinder databases were used as powerful tools to identify the potential migrants in the polyurethane (PU) adhesives and also in the individual plastic films (polyethylene terephthalate, polyamide, polypropylene, polyethylene, and polyethylene/ethyl vinyl alcohol). Migration tests were carried out by using Tenax(?) and isooctane as food simulants, and the migrants were analyzed by gas chromatography coupled to mass spectrometry. More than 63 volatile and semivolatile compounds considered as potential migrants were detected either in the adhesives or in the films. Migration tests showed two non-intentionally added substances (NIAS) coming from PU adhesives that migrated through the laminates into Tenax(?) and into isooctane. Identification of these NIAS was achieved through their mass spectra, and 1,6-dioxacyclododecane-7,12-dione and 1,4,7-trioxacyclotridecane-8,13-dione were confirmed. Caprolactam migrated into isooctane, and its origin was the external plastic film in the multilayer, demonstrating real diffusion through the multilayer structure. Comparison of the migration values between the simulants and conditions will be shown and discussed.     

Morphology of the male reproductive system and spermatozoa in Centris Fabricius, 1804 (Hymenoptera: Apidae, Centridini)

The genera Centris and Epicharis constitute the Centridini and are widely distributed in the Neotropical region. Centris is also found in the southern portion of the Neartic region, although both genera are more abundant in the humid tropical regions. To describe the structure of the male reproductive system and spermatozoa, light and transmission electron microscopy were used. The male reproductive system of Centris sp. is formed by a pair of testes, a pair of deferent ducts, a pair of seminal vesicles, a pair of accessory glands and an ejaculatory duct connected to the external genitalia, the aedeagus. In this species, testes and the pre-vesicular deferens ducts as well as the seminal vesicles are encapsulated in a single conjunctive capsule, the scrotal membrane. Each testis consists of four testicular follicles, made up of cysts with up to 64 germinative cells. Histologically, the seminal vesicles are formed by a simple cylindrical epithelium, basal membrane and muscular tunic. The spermatozoa of Centris analis, C. fuscata, C. tarsata and Centris sp. are morphologically similar. They have two easily distinguishable regions: the head and flagellum. The head is formed by the two-layer acrosome, the linear nucleus and the flagellum, the centriole adjunct, the axoneme of pattern 9+9+2 microtubules, two asymmetric mitochondrial derivatives and two accessory bodies. These Centris species share various morphological characteristics of the male reproductive system and spermatozoa with the other bees previously described, indicating that several characteristics are synapomorphic for the family Apidae. Studies on the morphology of the male reproductive system and spermatozoa in Hymenoptera have demonstrated the diversity of the information provided by these reproductive structures, which can be used in taxonomy studies and the phylogeny of this important group of insects.     

Statistical Experimental Design for Obtaining Nanocellulose from Curaua Fiber

Summary: This study focuses on the methodology to obtain nanocellulose from vegetal fibers. An experimental planning was carried out for the treatment of curaua fibers and parameters were estimated, having the concentration of H₂SO₄, hydrolysis time, reaction temperature and time of applied sonication as independent variables for further statistical analysis. According to the estimated parameters, the statistically significant effects were determined for the process of obtaining nanocellulose. With the results obtained from the thermogravimetric analysis (TGA) it was observed that certain conditions led to cellulose with degradation temperatures near or even above that of the untreated cellulose fibers. The crystallinity index (I_C) obtained after fiber treatment (by X-ray diffraction technique) was higher than that of the pure fiber. Treatments with high acid concentrations led to higher IC. After the statistical experimental design, mixtures of polypropylene with fibers prepared after different treatments were performed in a mini-extruder. It was possible to observe a sharp increase in the mechanical properties through the dynamic mechanical thermal analysis (DMTA).     

Influence of Organophilic Ammonium-Free Nanoclay Incorporation on Mechanical Properties and Biodegradability of Biodegradable Polyester

Summary: Disposal of petroleum-derived polymers is a growing global environmental problem of alarming proportions, which has increased interest in the use and production of biodegradable materials. In addition to biodegradation, investment in research and development in the nanotechnology area is also significant. This study evaluated the effect of incorporation of an organophilic nanoclay ammonium-free salt (Novaclay™) on the mechanical properties and biodegradation of a biodegradable polyester (Ecoflex®), according to ASTM G 160. Ecoflex with and without incorporated Novaclay was characterized before and after biodegradation in organically enriched soil for up to 180 days, by visual analysis, optical microscopy, weight loss, differential scanning calorimetry, dynamic mechanical analysis, mechanical testing, and scanning electron microscopy. The pure Ecoflex and the Ecoflex/Novaclay nanocomposite were partially biodegraded by the method used, and showed changes in their morphological and mechanical properties.     

Magnetic Torus Microreactor as a Novel Device for Sample Treatment via Solid-Phase Microextraction Coupled to Graphite Furnace Atomic Absorption Spectroscopy: A Route for Arsenic Pre-Concentration

This work studied the feasibility of using a novel microreactor based on torus geometry to carry out a sample pretreatment before its analysis by graphite furnace atomic absorption. The miniaturized retention of total arsenic was performed on the surface of a magnetic sorbent material consisting of 6 mg of magnetite (Fe₃O₄) confined in a very small space inside (20.1 µL) a polyacrylate device filling an internal lumen (inside space). Using this geometric design, a simulation theoretical study demonstrated a notable improvement in the analyte adsorption process on the solid extractant surface. Compared to single-layer geometries, the torus microreactor geometry brought on flow turbulence within the liquid along the curvatures inside the device channels, improving the efficiency of analyte–extractant contact and therefore leading to a high preconcentration factor. According to this design, the magnetic solid phase was held internally as a surface bed with the use of an 8 mm-diameter cylindric neodymium magnet, allowing the pass of a fixed volume of an arsenic aqueous standard solution. A preconcentration factor of up to 60 was found to reduce the typical “characteristic mass” (as sensitivity parameter) determined by direct measurement from 53.66 pg to 0.88 pg, showing an essential improvement in the arsenic signal sensitivity by absorption atomic spectrometry. This methodology emulates a miniaturized micro-solid-phase extraction system for flow-through water pretreatment samples in chemical analysis before coupling to techniques that employ reduced sample volumes, such as graphite furnace atomic absorption spectroscopy.     

Development of a Protein-Rich By-Product by 23 Factorial Design: Characterization of Its Nutritional Value and Sensory Analysis

The aim of this study was the development of a cereal bar based on bee pollen (BP), honey (H), and flour by-products (peel passion fruit flour—PPFF), generating an innovative product. BP is a protein-rich ingredient and can be used in the composition of cereal bars. PPFF is a by-product rich in fibers. The formulations were developed using a 2³ factorial design with four replicates in the center point, studying the sensory analysis as a response variable. The texture and nutritional parameters were performed for the optimal formulation. BP showed ca. 15% of protein. The final formulation (10.35% BP, 6.8% PPFF, and 25% H) presented 22.2% moisture, 1.8% ash, 0.4% total fat, 3.0% fiber, 63.1% carbohydrates, and 74.0 Kcal/25 g. The sensory analysis presented valued around 7 (typical of a traditional bar). Regarding the possibility of purchasing the product, 51% of the panelists said they would probably buy the developed product. The formulated cereal bar had a similar composition as those already marketed. Moreover, it can be considered a source of fiber and is sensory acceptable. This approach opens up new opportunities for developing nutritional and functional foodstuff with improved sensorial aspects.     

Modification of hemp shiv properties using water-repellent sol–gel coatings

For the first time, the hydrophilicity of hemp shiv was modified without the compromise of its hygroscopic properties. This research focused on the use of sol–gel method in preparation of coatings on the natural plant material, hemp shiv, that has growing potential in the construction industry as a thermal insulator. The sol–gel coatings were produced by cohydrolysis and polycondensation of tetraethyl orthosilicate (TEOS) using an acidic catalyst. Methyltriethoxysilane (MTES) was added as the hydrophobic precursor to provide water resistance to the bio-based material. Scanning electron microscopy (SEM) and focused ion beam (FIB) have been used to determine the morphological changes on the surface as well as within the hemp shiv. It was found that the sol–gel coatings caused a reduction in water uptake but did not strongly influence the moisture sorption behaviour of hemp shiv. Fourier transformed infrared (FTIR) spectroscopy shows that the coating layer on hemp shiv acts a shield, thereby lowering peak intensity in the wavelength range 1200–1800?cm^?1. The sol–gel coating affected pore size distribution and cumulative pore volume of the shiv resulting in tailored porosity. The overall porosity of shiv decreased with a refinement in diameter of the larger pores. Thermal analysis was performed using TGA and stability of coated and uncoated hemp shiv have been evaluated. Hemp shiv modified with sol–gel coating can potentially develop sustainable heat insulating composites with better hygrothermal properties.

Open image in new window

     

Simple,inexpensive mass spectrometric analyzer for thermogravimetry

A low‐cost mass spectrometer attachment for thermogravimetric analysis has been constructed from readily available commercial instruments and components. The benefits of this set‐up include excellent mass‐flow repeatability, simple design, and significantly lower adoption cost as opposed to ready‐built commercial solutions. The inclusion of an open source software package allows semi‐automated, highly simplified data analysis. The results from the instrument show excellent sensitivity for small volumes of evolved gas, as well as highly reproducible signal strengths. The GUI‐based software package provides data analysis in a way that is very intuitive and that can be easily modified to work with a broad range of TG instruments. Copyright © 2011 John Wiley & Sons, Ltd.