Stabilities and coordination modes of histidine in copper(II) mixed-ligand complexes with ethylenediamine,diethylenetriamine or N,N,N′,N″,N″-pentamethyldiethylenetriamine in aqueous solution

Solution equilibrium studies on the Cu(II)–polyamine–histidine ternary systems (polyamine: ethylenediamine (en), diethylenetriamine (dien), N,N,N′,N″,N″-pentamethyldiethylenetriamine (Me₅dien)) have been performed by pH-potentiometry, UV–Vis spectrophotometry and EPR methods. The obtained results suggest the formation of the mixed-ligand complexes with [Cu(A)(His)]⁺ stoichiometry in all studied systems. Additionally, in the systems with dien and Me₅dien protonated [Cu(A)(H–His)]²⁺ species also exists in acid solution. Our spectroscopic results indicate the tetragonal geometry for the [Cu(en)(His)]⁺, the geometry slightly deviated from square pyramidal for the [Cu(dien)(His)]⁺ and strongly deviated from square pyramidal towards trigonal bipyramidal for the [Cu(Me₅dien)(His)]⁺ species. The coordination modes in these mixed-ligand complexes are discussed.     

Micro- and Nanosecond Pulses Used in Doxorubicin Electrochemotherapy in Human Breast and Colon Cancer Cells with Drug Resistance

(1) Background: Pulsed electric field (PEF) techniques are commonly used to support the delivery of various molecules. A PEF seems a promising method for low permeability drugs or when cells demonstrate therapy resistance and the cell membrane becomes an impermeable barrier. (2) Methods: In this study, we have used doxorubicin-resistant and sensitive models of human breast cancer (MCF-7/DX, MCF-7/WT) and colon cancer cells (LoVo, LoVoDX). The study aimed to investigate the susceptibility of the cells to doxorubicin (DOX) and electric fields in the 20–900 ns pulse duration range. The viability assay was utilized to evaluate the PEF protocols’ efficacy. Cell confluency and reduced glutathione were measured after PEF protocols. (3) Results: The obtained results showed that PEFs significantly supported doxorubicin delivery and cytotoxicity after 48 and 72 h. The 60 kV/cm ultrashort pulses × 20 ns × 400 had the most significant cytotoxic anticancer effect. The increase in DOX concentration provokes a decrease in cell viability, affected cell confluency, and reduced GSSH when combined with the ESOPE (European Standard Operating Procedures of Electrochemotherapy) protocol. Additionally, reactive oxygen species after PEF and PEF-DOX were detected. (4) Conclusions: Ultrashort electric pulses with low DOX content or ESOPE with higher DOX content seem the most promising in colon and breast cancer treatment.     

Ligand-free nickel catalyzed perfluoroalkylation of arenes and heteroarenes

We describe a “ligand-free” Ni-catalyzed perfluoroalkylation of heteroarenes to produce a diverse array of trfiluoromethyl, pentafluoroethyl and heptafluoropropyl adducts. Catalysis proceeds at room temperature via a radical pathway. The catalytic protocol is distinguished by its simplicity, and its wide scope demonstrates the potential in the late-stage functionalization of drug analogues and peptides.

A ligand-free, room temperature, Ni-catalyzed perfluoroalkylation of heteroarenes produced a diverse array of polyfluorinated adducts; potential in the late-stage functionalization of drugs and peptides is also demonstrated.     

Development and validation of a method for the determination of trace alkylphenols and phthalates in the atmosphere

An analytical method has been developed for the simultaneous extraction and determination of trace tertiary octylphenol (t-OP), technical nonylphenol isomers (NP), nonylphenol monoethoxylate isomers (NP1EO) and seven phthalates in the atmosphere using gas chromatography-mass spectrometry (GC-MS). High volume samples were collected using a high-volume pump equipped with a PUF/XAD-2 column for air and glass fiber filter for particles. The detection limits of the method for alkylphenols (APs) and the phthalates ranged from 0.0006 to 0.034 ng m⁻³ in air. The recoveries of t-OP, NP, NP1EO and the phthalates for the entire procedure were satisfactory (>69%). The method was successfully applied to the determination of the analytes in the atmosphere samples collected over land and the ocean. The concentrations of t-OP, NP, NP1EO showed decline trends from land to the open sea, and the phthalates present over land and the North Sea were comparable. It is suggested that the atmosphere is a significant pathway for the transport of alkylphenols and the phthalates in the environment.     

Reactivity and regioselectivity in the synthesis of spiroindoles via indole o-quinodimethanes. An experimental and computational study

The 1,3-dipolar cycloaddition reactions of stable nitrile oxides with indole o-quinodimethanes have been examined. In all cases the ‘exo-anti’ addition products, dispiroisoxazolines, were isolated in moderate to good yields (25-47%). In addition, from the reaction of one of the indole quinodimethanes with mesitonitrile oxide the ‘exo-syn’ addition product was isolated in 7% yield along with the remarkable indole quinodimethane dimerization and cycloaddition product, which was isolated in 13% yield. An analogous dimerization and cycloaddition product was isolated in 18% yield from the reaction of the N-acetyl-indole quinodimethane with mesitonitrile oxide. In the case of the reaction of the N-benzoylindole quinodimethane with the 2,6-dichlorobenzonitrile oxide an oxime was also isolated in 13% yield. The proposed reaction mechanism is supported by semiempirical (AM1) MO calculations via FMO interactions. The observed selectivity was explained by an investigation of the transition states carried out also for analogous dispiroisoxazolines.     

Electrochemical determination of chromium(VI) using metallic nanoparticle-modified carbon screen-printed electrodes

Carbon screen-printed electrodes (CSPEs) modified with metal nanoparticles present an interesting alternative in the determination of chromium(VI) by differential pulse voltammetry (DPV).Metallic silver and gold nanoparticle deposits have been obtained by electrochemical deposition. Scanning electron microscopy measurements show that the electrochemically synthesized silver and gold nanoparticles are deposited in aggregated form.The detection limit for the analytical procedures developed in this work were 8.5 × 10⁻⁷ and 4.0 × 10⁻⁷ M for silver and gold nanoparticle-modifed CSPE, respectively.In terms of reproducibility, the precision of the above-mentioned method was calculated at 6.7% in %R.S.D. values for silver and 3.21% for gold nanoparticle CSPE.     

Soft-landing of peptides onto self-assembled monolayer surfaces

Mass-selected peptide ions produced by electrospray ionization were deposited as ions by soft-landing (SL) onto fluorinated and hydrogenated self-assembled monolayer (FSAM and HSAM) surfaces using a Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS) specially designed for studying collisions of large ions with surfaces. Analysis of modified surfaces was performed in situ by combining 2 keV Cs(+) secondary ion mass spectrometry with FT-ICR detection of the sputtered ions (FT-ICR-SIMS). Similar SIMS spectra obtained following SL at different collision energies indicate that peptide fragmentation occurred in the analysis step (SIMS) rather than during ion deposition. The effect of the surface on SL was studied by comparing the efficiencies of SL on gold, FSAM, HSAM, and COOH-terminated SAM surfaces. It was found that FSAM surfaces are more efficient in retaining ions than their HSAM analogues, consistent with their larger polarizability. The efficiency of soft-landing of different peptides on the FSAM surface increases with the charge state of the ion, also consistent with an ion-polarizable molecule model for the initial stage of soft-landing on SAM surfaces. The gradual decrease of peptide ion deposition efficiency with an increase in collision energy found experimentally was quantitatively rationalized using the hard-cube model.     

New method to measure packing densities of self-assembled thiolipid monolayers

For a monolayer of 2,3-di-phytanyl-sn-glycerol-1-tetraethylene glycol-D,L-a-lipoic acid ester lipid (DPTL) self-assembled (SAM) at a gold electrode surface we propose a new method to determine the charge number per adsorbed molecule and the packing density (area per molecule) in the monolayer. The method relies on chronocoulometry to measure the charge density at the SAM covered gold electrode surface. Two series of measurements have to be performed. In the first series, charge densities are measured for a monolayer transferred from the air-solution to the metal-solution interface using the Langmuir-Blodgett (LB) technique. This series of measurements allows one to determine charge numbers per adsorbed DPTL molecule. The second series is performed using a gold electrode covered with a self-assembled monolayer. The charge densities obtained in this series are then used to calculate the packing density with the help of charge numbers per adsorbed DPTL determined in the first series. The area per adsorbed molecule determined by the new method was compared to the area per molecule determined by the popular reductive desorption method. The molecular area determined with the new method is about 20% larger than the area calculated from the van der Waals model, which is a physically reasonable result. In contrast, the popular reductive desorption method gives an area per molecule 20% lower than the minimum estimated based on a van der Waals model. This is a physically unreasonable result. It is also shown that the charge numbers per adsorbed molecule depend on the electrode potential and may assume values smaller than the number of electrons participating in the reductive desorption step. An explanation of the origin of the "partial charge numbers" is provided. We recommend the new method be used in future studies of thiol adsorption at metal surfaces.     

Dilatational rheology of beta-casein adsorbed layers at liquid-fluid interfaces

The rheological behavior of beta-casein adsorption layers formed at the air-water and tetradecane-water interfaces is studied in detail by means of pendant drop tensiometry. First, its adsorption behavior is briefly summarized at both interfaces, experimentally and also theoretically. Subsequently, the experimental dilatational results obtained for a wide range of frequencies are presented for both interfaces. An interesting dependence with the oscillation frequency is observed via the comparative analysis of the interfacial elasticity (storage part) and the interfacial viscosity (loss part) for the two interfaces. The analysis of the interfacial elasticities provides information on the conformational transitions undergone by the protein upon adsorption at both interfaces. The air-water interface shows a complex behavior in which two maxima merge into one as the frequency increases, whereas only a single maximum is found at the tetradecane interface within the range of frequencies studied. This is interpreted in terms of a decisive interaction between the oil and the protein molecules. Furthermore, the analysis of the interfacial viscosities provides information on the relaxation processes occurring at both interfaces. Similarly, substantial differences arise between the gaseous and liquid interfaces and various possible relaxation mechanisms are discussed. Finally, the experimental elasticities obtained for frequencies higher than 0.1 Hz are further analyzed on the basis of a thermodynamic model. Accordingly, the nature of the conformational transition given by the maximum at these frequencies is discussed in terms of different theoretical considerations. The formation of a protein bilayer at the interface or the limited compressibility of the protein in the adsorbed state are regarded as possible explanations of the maximum.