Cinchona based squaramide catalysed enantioselective Michael addition of α-nitrophosphonates to aryl acrylates: enantioselective synthesis of quaternary α-aminophosphonates

Several cinchona based squaramide catalysts were applied to the asymmetric Michael addition of α-nitroethylphosphonates to acrylic acid aryl esters, resulting in high yields and enantioselectivities. The absolute configuration of one of the quaternary α-nitrophosphonate adducts was deduced from its experimental and calculated CD spectra. The adducts were reduced to their cyclic aminophosphonates by catalytic hydrogenation.     

Direct aqueous photochemistry of isoprene high-NO(x) secondary organic aerosol

Secondary organic aerosol (SOA) generated from the high-NO(x) photooxidation of isoprene was dissolved in water and irradiated with λ > 290 nm radiation to simulate direct photolytic processing of organics in atmospheric water droplets. High-resolution mass spectrometry was used to characterize the composition at four time intervals (0, 1, 2, and 4 h). Photolysis resulted in the decomposition of high molecular weight (MW) oligomers, reducing the average length of organics by 2 carbon units. The average molecular composition changed significantly after irradiation (C(12)H(19)O(9)N(0.08) + hν → C(10)H(16)O(8)N(0.40)). Approximately 65% by count of SOA molecules decomposed during photolysis, accompanied by the formation of new products. An average of 30% of the organic mass was modified after 4 h of direct photolysis. In contrast, only a small fraction of the mass (<2%), belonging primarily to organic nitrates, decomposed in the absence of irradiation by hydrolysis. Furthermore, the concentration of aromatic compounds increased significantly during photolysis. Approximately 10% (lower limit) of photodegraded compounds and 50% (upper limit) of the photoproducts contain nitrogen. Organic nitrates and multifunctional oligomers were identified as compounds degraded by photolysis. Low-MW 0N (compounds with 0 nitrogen atoms in their structure) and 2N compounds were the dominant photoproducts. Fragmentation experiments using tandem mass spectrometry (MS(n), n = 2-3) indicate that the 2N products are likely heterocyclic/aromatic and are tentatively identified as furoxans. Although the exact mechanism is unclear, these 2N heterocyclic compounds are produced by reactions between photochemically-formed aqueous NO(x) species and SOA organics.     

Charge-transfer interactions in a multichromophoric hexaarylbenzene containing pyrene and triarylamines

Two different hexaarylbenzenes with three pyrene and three triarylamine substituents in different positions (trigonal symmetric and asymmetric arrangement) were synthesized, and their charge-transfer states were investigated by optical spectroscopy. In these multichromophoric systems triarylamine acts as the electron donor and pyrene as the electron acceptor. A reference chromophore with only one donor-acceptor pair was also investigated. All these chromophores form charge-transfer states upon photoexcitation which relax with a moderate fluorescence quantum yield to the ground state. The compounds do not differ significantly concerning most of their fluorescence properties, which shows that the fluorescent charge-transfer state is very similar in all chromophores. This observation indicates symmetry breaking for the symmetric chromophore within fluorescence lifetime of several tens of ns. This interpretation was substantiated by fluorescence excitation anisotropy measurements in a sucrose octaacetate matrix.     

Reactive quenching of OH A (2)Σ(+) by O(2) and CO: Experimental and nonadiabatic theoretical studies of H- and O-atom product channels

The outcomes following collisional quenching of electronically excited OH A (2)Σ(+) by O(2) and CO are examined in a combined experimental and theoretical study. The atomic products from reactive quenching are probed using two-photon laser-induced fluorescence to obtain H-atom Doppler profiles, O ((3)P(J)) atom fine structure distributions, and the relative yields of these products with H(2), O(2), and CO collision partners. The corresponding H-atom translational energy distributions are extracted for the H + O(3) and H + CO(2) product channels, in the latter case revealing that most of the available energy is funneled into internal excitation of CO(2). The experimental product branching ratios show that the O-atom producing pathways are the dominant outcomes of quenching: the OH A (2)Σ(+) + O(2) → O + HO(2) channel accounts for 48(3)% of products and the OH A (2)Σ(+) + CO → O + HCO channel yields 76(5)% of products. In addition, quenching of OH A (2)Σ(+) by O(2) generates H + O(3) products [12(3)%] and returns OH to its ground X (2)Π electronic state [40(1)%; L. P. Dempsey, T. D. Sechler, C. Murray, and M. I. Lester, J. Phys. Chem. A 113, 6851 (2009)]. Quenching of OH A (2)Σ(+) by CO also yields H + CO(2) reaction products [26(5)%]; however, OH X (2)Π (v(") = 0,1) products from nonreactive quenching are not observed. Theoretical studies characterize the properties of energy minimized conical intersections in four regions of strong nonadiabatic coupling accessible from the OH A (2)Σ(+) + CO asymptote. Three of these regions have the O-side of OH pointing toward CO, which lead to atomic H and vibrationally excited CO(2) products and∕or nonreactive quenching. In the fourth region, energy minimized points are located on a seam of conical intersection from the OH A (2)Σ(+) + CO asymptote to an energy minimized crossing with an extended OH bond length and the H-side of OH pointing toward CO in a bent configuration. This region, exoergic with respect to the reaction asymptote, is likely to be the origin of the dominant O + HCO product channel.     

Effect of flow on polymer-polymer miscibility

The effect of shear flow on the phase behaviour of partially miscible blends exhibiting a lower critical solution temperature behaviour has been investigated. Miscibility limits were detected, with and without the application of flow, as changes from optical clarity to turbidity using light scattering and as the appearance of double glass transition temperatures. Light scattering data were collected on a rheo-optical device that was designed to monitor phase changes in polymer blends undergoing shear flow between parallel glass plates in a temperature controlled environment. Glass transition temperatures of some quenched sheared blends were measured using a differential scanning calorimeter in order to confirm the conclusions from the light scattering data. It was found that shear induced demixing and shear induced mixing may be observed within the same blend depending on the magnitude of the applied flow. Miscibility gaps and closed miscibility loops may appear in the phase diagrams. At certain temperatures and shear rates unusual scattering patterns were observed and these were associated with a “ripple” morphology when directly viewed through the microscope.     

Determination of flavanol and procyanidin (by degree of polymerization 1-10) content of chocolate, cocoa liquors, powder(s), and cocoa flavanol extracts by normal phase high-performance liquid chromatography: collaborative study

An international collaborative study was conducted on an HPLC method with fluorescent detection (FLD) for the determination of flavanols and procyanidins in materials containing chocolate and cocoa. The sum of the oligomeric fractions with degree of polymerization 1-10 was the determined content value. Sample materials included dark and milk chocolates, cocoa powder, cocoa liquors, and cocoa extracts. The content ranged from approximately 2 to 500 mg/g (defatted basis). Thirteen laboratories representing commercial, industrial, and academic institutions in six countries participated in the study. Fourteen samples were sent as blind duplicates to the collaborators. Results from 12 laboratories yielded repeatability relative standard deviation (RSDr) values that were below 10% for all materials analyzed, ranging from 4.17 to 9.61%. The reproducibility relative standard deviation (RSD(R)) values ranged from 5.03 to 12.9% for samples containing 8.07 to 484.7 mg/g. In one sample containing a low content of flavanols and procyanidins (approximately 2 mg/g), the RSD(R) was 17.68%. Based on these results, the method is recommended for Official First Action for the determination of flavanols and procyanidins in chocolate, cocoa liquors, powder(s), and cocoa extracts.     

Luminescent heterometallic gold-copper alkynyl complexes stabilized by tridentate phosphine

The reactions between trinuclear gold complex tppmAu(3)Cl(3) (tppm = tris(diphenylphosphino)methane), arylacetylenes HC(2)C(6)H(4)X and Cu(+) under basic conditions result in formation of the heterometallic complexes [tppm(AuC(2)C(6)H(4)X)(3)Cu](+), X = H (1), COOMe (2), CN (3), OMe (4), NH(2) (5). These compounds belong to one structural motif and consist of the heterometallic {(AuC(2)C(6)H(4)X)(3)Cu} core stabilized by the tridentate phosphine. Compounds 1-5 were characterized by polynuclear NMR and IR spectroscopy, ESI-MS and single-crystal X-ray analysis. Luminescence properties of these complexes have been studied and revealed a substantial red shift of the emission maxima with the increase in the electron donicity of the alkynyl ligands substituents in the 550-680 nm range. The theoretical calculations of the electronic structures showed that variations of the substituents on the alkynyl ligands display very little effect on the molecular structural parameters but show appreciable influence on the orbital energies and luminescence characteristics of the compounds under study.     

Nanomechanical properties of phospholipid microbubbles

This study uses atomic force microscopy (AFM) force-deformation (F-Δ) curves to investigate for the first time the Young's modulus of a phospholipid microbubble (MB) ultrasound contrast agent. The stiffness of the MBs was calculated from the gradient of the F-Δ curves, and the Young's modulus of the MB shell was calculated by employing two different mechanical models based on the Reissner and elastic membrane theories. We found that the relatively soft phospholipid-based MBs behave inherently differently to stiffer, polymer-based MBs [Glynos, E.; Koutsos, V.; McDicken, W. N.; Moran, C. M.; Pye, S. D.; Ross, J. A.; Sboros, V. Langmuir2009, 25 (13), 7514-7522] and that elastic membrane theory is the most appropriate of the models tested for evaluating the Young's modulus of the phospholipid shell, agreeing with values available for living cell membranes, supported lipid bilayers, and synthetic phospholipid vesicles. Furthermore, we show that AFM F-Δ curves in combination with a suitable mechanical model can assess the shell properties of phospholipid MBs. The "effective" Young's modulus of the whole bubble was also calculated by analysis using Hertz theory. This analysis yielded values which are in agreement with results from studies which used Hertz theory to analyze similar systems such as cells.     

Theoretical insights into the ferromagnetic coupling in oxalato-bridged chromium(III)-cobalt(II) and chromium(III)-manganese(II) dinuclear complexes with aromatic diimine ligands

Two novel heterobimetallic complexes of formula [Cr(bpy)(ox)(2)Co(Me(2)phen)(H(2)O)(2)][Cr(bpy)(ox)(2)]·4H(2)O (1) and [Cr(phen)(ox)(2)Mn(phen)(H(2)O)(2)][Cr(phen)(ox)(2)]·H(2)O (2) (bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and Me(2)phen = 2,9-dimethyl-1,10-phenanthroline) have been obtained through the "complex-as-ligand/complex-as-metal" strategy by using Ph(4)P[CrL(ox)(2)]·H(2)O (L = bpy and phen) and [ML'(H(2)O)(4)](NO(3))(2) (M = Co and Mn; L' = phen and Me(2)phen) as precursors. The X-ray crystal structures of 1 and 2 consist of bis(oxalato)chromate(III) mononuclear anions, [Cr(III)L(ox)(2)](-), and oxalato-bridged chromium(III)-cobalt(II) and chromium(III)-manganese(II) dinuclear cations, [Cr(III)L(ox)(μ-ox)M(II)L'(H(2)O)(2)](+)[M = Co, L = bpy, and L' = Me(2)phen (1); M = Mn and L = L' = phen (2)]. These oxalato-bridged Cr(III)M(II) dinuclear cationic entities of 1 and 2 result from the coordination of a [Cr(III)L(ox)(2)](-) unit through one of its two oxalato groups toward a [M(II)L'(H(2)O)(2)](2+) moiety with either a trans- (M = Co) or a cis-diaqua (M = Mn) configuration. The two distinct Cr(III) ions in 1 and 2 adopt a similar trigonally compressed octahedral geometry, while the high-spin M(II) ions exhibit an axially (M = Co) or trigonally compressed (M = Mn) octahedral geometry in 1 and 2, respectively. Variable temperature (2.0-300 K) magnetic susceptibility and variable-field (0-5.0 T) magnetization measurements for 1 and 2 reveal the presence of weak intramolecular ferromagnetic interactions between the Cr(III) (S(Cr) = 3/2) ion and the high-spin Co(II) (S(Co) = 3/2) or Mn(II) (S(Mn) = 5/2) ions across the oxalato bridge within the Cr(III)M(II) dinuclear cationic entities (M = Co and Mn) [J = +2.2 (1) and +1.2 cm(-1) (2); H = -JS(Cr)·S(M)]. Density functional electronic structure calculations for 1 and 2 support the occurrence of S = 3 Cr(III)Co(II) and S = 4 Cr(III)Mn(II) ground spin states, respectively. A simple molecular orbital analysis of the electron exchange mechanism suggests a subtle competition between individual ferro- and antiferromagnetic contributions through the σ- and/or π-type pathways of the oxalato bridge, mainly involving the d(yz)(Cr)/d(xy)(M), d(xz)(Cr)/d(xy)(M), d(x(2)-y(2))(Cr)/d(xy)(M), d(yz)(Cr)/d(xz)(M), and d(xz)(Cr)/d(yz)(M) pairs of orthogonal magnetic orbitals and the d(x(2)-y(2))(Cr)/d(x(2)-y(2))(M), d(xz)(Cr)/d(xz)(M), and d(yz)(Cr)/d(yz)(M) pairs of nonorthogonal magnetic orbitals, which would be ultimately responsible for the relative magnitude of the overall ferromagnetic coupling in 1 and 2.     

Well‐Defined Molecular Magnesium Hydride Clusters: Relationship between Size and Hydrogen‐Elimination Temperature

A new tetranuclear magnesium hydride cluster, [{ NN ‐(MgH)₂}₂], which was based on a N? N‐coupled bis‐β‐diketiminate ligand ( NN ^2?), was obtained from the reaction of [{ NN ‐(MgnBu)₂}₂] with PhSiH₃. Its crystal structure reveals an almost‐tetrahedral arrangement of Mg atoms and two different sets of hydride ions, which give rise to a coupling in the NMR spectrum (J=8.5 Hz). To shed light on the relationship between the cluster size and H₂ release, the thermal decomposition of [{ NN ‐(MgH)₂}₂] and two closely related systems that were based on similar ligands, that is, an octanuclear magnesium hydride cluster and a dimeric magnesium hydride species, have been investigated in detail. A lowering of the H₂‐desorption temperature with decreasing cluster size is observed, in line with previously reported theoretical predictions on (MgH₂)_n model systems. Deuterium‐labeling studies further demonstrate that the released H₂ solely originates from the oxidative coupling of two hydride ligands and not from other hydrogen sources, such as the β‐diketiminate ligands. Analysis of the DFT‐computed electron density in [{ NN ‐(MgH)₂}₂] reveals a counterintuitive interaction between two formally closed‐shell H^? ligands that are separated by 3.106 Å. This weak interaction could play an important role in H₂ desorption. Although the molecular product after H₂ release could not be characterized experimentally, DFT calculations on the proposed decomposition product, that is, the low‐valence tetranuclear Mg(I) cluster [( NN ‐Mg₂)₂], predict a structure with two almost‐parallel, localized Mg? Mg bonds. As in a previously reported β‐diketiminate Mg^I dimer, the Mg? Mg bond is not characterized by a bond critical point, but instead displays a local maximum of electron density midway between the atoms, that is, a non‐nuclear attractor (NNA). Interestingly, both of the NNAs in [( NN ‐Mg₂)₂] are connected through a bond path that suggests that there is bonding between all four Mg^I atoms.