Programmable modification of cell adhesion and zeta potential in silica microchips

Spatial patterning of thin polyacrylamide films bonded to self-assembled monolayers on silica microchannels is described as a means for manipulating cell-adhesion and electroosmotic properties in microchips. Streaming potential measurements indicate that the zeta potential is reduced by at least two orders of magnitude at biological pH, and the adhesion of several kinds of cells is reduced by 80-100%. Results are shown for cover slides and in wet-etched silica microchannels. Because the polyacrylamide film is thin and transparent, this film is consistent with optical manipulation of cells and detection of cell contents. The spatial patterning technique is straightforward and has the potential to aid on-chip analysis of single adherent cells.     

What should be impossible: resolution of the mononuclear gallium coordination complex, Tris(benzohydroxamato)gallium(III)

Complexes of Ga3+, a d10 metal ion which lacks ligand-field-stabilization energy, are considered labile. In fact, hexaaquagallium(III) has a ligand exchange rate of 403 s-1, 2.5 times that of the analagous Fe3+ complex (Hugi-Cleary, D.; Helm, L.; Merbach, A. E. J. Am. Chem. Soc. 1987, 109, 4444-4450). Given this lability, resolution of Ga3+ complexes should be impossible. Despite this, we report the resolution of the Lambda and Delta isomers of tris(benzohydroxamate)gallium (III) (1), the first resolution of a mononuclear gallium complex. Not only is resolution possible, but these resolved complexes show remarkable resistance to racemization in aprotic solvents. The unprecedented stability of Lambda- and Delta-1 is a surprise, and as such, alters our understanding of classical coordination chemistry.     

Design and synthesis of a diverse morpholine template library

Efficient and general procedures have been developed for the solution-phase preparation of substituted morpholine derivatives, and a library has been produced around generic structure 1. This library was designed with proprietary modeling software for use as a general screening library. The 30 R1 reagents were phenols, and the 275 R2 reagents were taken from five different reagent classes, giving a variety of product classes in the final library of 8250 potential products. All of the library members were generated from a common intermediate, mesylate (5), which was synthesized efficiently, in bulk, in three steps from N-benzylethanolamine (2). High-throughput chemistry using robotics was carried out to produce the 7907 library members, which were individually characterized by reversed-phase LC/MS analysis.     

Recent advances in the applications of forensic science to fire debris analysis

The forensic discipline of ignitable liquid and fire debris analysis is rapidly changing. Refinements in existing methods as well as development of new techniques are changing the routine methods of analysis. Optimization of existing extraction techniques and research into novel methods of extracting debris have improved the recovery of ignitable liquids from debris samples. The application of highly specialized instrumentation to problems of sensitivity and matrix interference has resulted in new ways of performing chemical analyses, allowing for improved limits of detection. Preliminary research in novel approaches to ignitable liquid comparisons is being evaluated, with the hopes of providing more detailed information to the field investigators. Research into a variety of areas related to fire debris analysis is ongoing, and will continue to improve the quality of ignitable liquid residue analysis.     

Evaluation and applications of a gaseous mercuric chloride source

In this study, a diffusion-type device for generating gaseous mercuric chloride (HgCl₂) was systematically evaluated and applied to validate the annular denuder method for sampling gaseous HgCl₂ species in a synthetic gas stream. The results show that it takes at least 48 h for the system to reach a steady-state condition after the diffusion cell reaches the temperature set-point and the carrier gas is activated. The primary Hg species from the source was proven to be HgCl₂. In the temperature range from –5.00 to 11.80 °C, the Hg emission rates from the source vary from 1.8 to 14.2 pg min^–1. It is shown that, under the experimental conditions examined, KCl-coated annular quartz denuders designed for ambient reactive gaseous mercury (RGM) collection could quantitatively collect HgCl₂. It is also demonstrated that the impactors used to remove coarse airborne particulate matter could lead to a loss of up to one third of the HgCl₂ in the gas stream.     

Reduced expression of <Emphasis Type="Italic">TAC1</Emphasis>, <Emphasis Type="Italic">PENK</Emphasis> and <Emphasis Type="Italic">SOCS2</Emphasis> in <Emphasis Type="Italic">Hcrtr-2</Emphasis> mutated narcoleptic dog brain

Background  

Narcolepsy causes dramatic behavioral alterations in both humans and dogs, with excessive sleepiness and cataplexy triggered by emotional stimuli. Deficiencies in the hypocretin system are well established as the origin of the condition; both from studies in humans who lack the hypocretin ligand (HCRT) and in dogs with a mutation in hypocretin receptor 2 (HCRTR2). However, little is known about molecular alterations downstream of the hypocretin signals.     

Synthesis of H‐shaped complex macromolecular structures by combination of atom transfer radical polymerization,photoinduced radical coupling,ring‐opening polymerization,and iniferter processes

Three controlled/living polymerization processes, namely atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP) and iniferter polymerization, and photoinduced radical coupling reaction were combined for the preparation of ABCBD‐type H‐shaped complex copolymer. First, α‐benzophenone functional polystyrene (BP‐PS) and poly(methyl methacrylate) (BP‐PMMA) were prepared independently by ATRP. The resulting polymers were irradiated to form ketyl radicals by hydrogen abstraction of the excited benzophenone moieties present at each chain end. Coupling of these radicals resulted in the formation of polystyrene‐b‐poly(methyl methacrylate) (PS‐b‐PMMA) with benzpinacole structure at the junction point possessing both hydroxyl and iniferter functionalities. ROP of ε‐caprolactone (CL) by using PS‐b‐PMMA as bifunctional initiator, in the presence of stannous octoate yielded the corresponding tetrablock copolymer, PCL‐PS‐PMMA‐PCL. Finally, the polymerization of tert‐butyl acrylate (tBA) via iniferter process gave the targeted H‐shaped block copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4601–4607     

Organocatalytic depolymerization of poly(ethylene terephthalate)

We describe the organocatalytic depolymerization of poly(ethylene terephthalate) (PET), using a commercially available guanidine catalyst, 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD). Postconsumer PET beverage bottles were used and processed with 1.0 mol % (0.7 wt %) of TBD and excess amount of ethylene glycol (EG) at 190 °C for 3.5 hours under atmospheric pressure to give bis(2‐hydroxyethyl) terephthalate (BHET) in 78% isolated yield. The catalyst efficiency was comparable to other metal acetate/alkoxide catalysts that are commonly used for depolymerization of PET. The BHET content in the glycolysis product was subject to the reagent loading. This catalyst influenced the rate of the depolymerization as well as the effective process temperature. We also demonstrated the recycling of the catalyst and the excess EG for more than 5 cycles. Computational and experimental studies showed that both TBD and EG activate PET through hydrogen bond formation/activation to facilitate this reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A procedure for the evaluation of vibrations induced by the passing of a train and its application to real railway traffic

In recent years, ground vibrations have become an important issue due to the growing awareness of the society about environmental living conditions. In this way, vibrations caused by trains running near houses or workplaces are considered disturbing for residents. Within this framework, this paper presents a procedure to estimate the vibration path caused by the passing of a train. In order to achieve this, the equations which describe the physical phenomenon are set in the frequency and wavenumber domain and solved by using the Fourier Transform. The obtained analytical solution is transformed back into the time and space domain by means of the Fourier series. The obtained theoretical results are compared with experimental measurements carried out in the Madrid–Barcelona High Speed Line in order to analyse the performance of this procedure.     

Uniform in bandwidth consistency of kernel estimators of the tail index

We consider a class of kernel estimators [^(t)]_n,h\hat{\tau}_{n,h} of the tail index of a Pareto-type distribution, which generalizes and includes the classical Hill estimator [^(a)]_n,k\hat{a}_{n,k}. It is well-known that [^(a)]_n,k\hat{a}_{n,k} is a consistent estimator of the tail index if and only if k→ ∞ and k/n→0. Under suitable assumptions on the kernel, [^(t)] _n,h\hat{\tau} _{n,h} is consistent whenever the bandwidth is taken to be a sequence of non-random numbers satisfying h _n →0 and nh _n → ∞. We extend this result and prove the consistency uniformly over a certain range of bandwidths. This permits the treatment of estimators of the tail index based upon data-dependent bandwidths, which are often used in practice. In the process, we establish a uniform in bandwidth result for kernel-type regression estimators with a fixed design, which will likely be of separate interest.