Polypyrrole electrodeposition on inorganic semiconductors CuInSe2 and CuInS2 for photovoltaic applications

Thin polypyrrole (PPy) layers with an average thickness of about 0.5 μm were deposited, using potentiostatic and galvanostatic techniques, on CuInSe₂ (CISe) structures prepared electrochemically on glass/ITO substrates and on CuInS₂ (CIS) structures fabricated on Cu tape substrates. The polymer layer of p-type is considered as an alternative to the traditional buffer layer and window layer in the conventional cell structure. The deposition proceeded from an aqueous solution containing sodium naphthalene-2-sulfonate as a dopant. In order to prepare stable PPy films of high quality with a good adherence to the surface of inorganic semiconductors CIS and CISe, the optimal concentrations of reagents, current densities and electrodepositing potentials were selected experimentally. Electrochemical polymerization of pyrrole to PPy on CIS surfaces is faster under white light irradiation and the polymerisation starts at lower potential than in the dark. Significant photovoltage and photocurrent of the fabricated CISe/PPy and CIS/PPy structures have been observed under standard white light illumination.     

Heavy alkaline earth metal pyrazolates: synthetic pathways, structural trends, and comparison with divalent lanthanoids

Two series of heavy alkaline earth metal pyrazolates, [M(Ph(2)pz)(2)(thf)(4)] 1 a-c (Ph(2)pz=3,5-diphenylpyrazolate, M=Ca, Sr, Ba; THF=tetrahydrofuran) and [M(Ph(2)pz)(2)(dme)(n)] (M=Ca, 2 a, Sr, 2 b, n=2; M=Ba, 2 c, n=3; DME=1,2-dimethoxyethane) have been prepared by redox transmetallation/ligand exchange utilizing Hg(C(6)F(5))(2). Compounds 1 a and 2 b were also obtained by redox transmetallation with Tl(Ph(2)pz). Alternatively, direct reaction of the alkaline earth metals with 3,5-diphenylpyrazole at elevated temperatures under solventless conditions yielded compounds 1 a-c and 2 a-c upon extraction with THF or DME. By contrast, [M(Me(2)pz)(2)(Me(2)pzH)(4)] 3 a-c (M=Ca, Sr, Ba; Me(2)pzH=3,5-dimethylpyrazole) were prepared by protolysis of [M[N(SiMe(3))(2)](2)(thf)(2)] (M=Ca, Sr, Ba) with Me(2)pzH in THF and by direct metallation with Me(2)pzH in liquid NH(3)/THF. Compounds 1 a-c and 2 a-c display eta(2)-bonded pyrazolate ligands, while 3 a,b exhibit eta(1)-coordination. Complexes 1 a-c have transoid Ph(2)pz ligands and an overall coordination number of eight with a switch from mutually coplanar Ph(2)pz ligands in 1 a,b to perpendicular in 1 c. In eight coordinate 2 a,b the pyrazolate ligands are cisoid, whilst 2 c has an additional DME ligand and a metal coordination number of ten. By contrast, 3 a,b have octahedral geometry with four eta(1)-Me(2)pzH donors, which are hydrogen-bonded to the uncoordinated nitrogen atoms of the two trans Me(2)pz ligands. The application of synthetic routes initially developed for the preparation of lanthanoid pyrazolates provides detailed insight into the similarities and differences between the two groups of metals and structures of their complexes.     

Express detection of nonylphenol in water samples by fluorescence polarization immunoassay

The development of express method for detection of endocrine-disrupting chemicals (EDC) such as alkylphenols is required for ecological monitoring. Several attempts have been made to produce antibodies against 4-nonylphenol (NP) in recent years. This work describes the production of new antibodies against NP and also summarizes the characterization of antibodies obtained earlier. Three approaches used to produce alkylphenol-specific antibodies are compared; these are based on: 1. omega-(4-hydroxyphenyl)nonanoic or omega-(4-hydroxyphenyl)heptanoic acid NP derivatives designed to mimic the linear NP isomer; 2. 4-aminophenol, which potentially mimics various substituted phenolic compounds with different side-chain structures at position 4 of the benzene ring; and 3. a mixture of branched NP isomers, conjugated to the carrier protein via a benzene ring by the Mannich reaction, and expected to be the closest mimic of NP structure by preserving its natural alkyl moiety.Fluorescence polarization immunoassays based on different combinations of antibody and labeled antigen for screening detection of NP were developed and structural aspects of assay sensitivity and specificity were investigated. The assays based on the antisera raised against omega-(4-hydroxyphenyl)nonanoic acid and NP conjugate via Mannich reaction are capable of express detection of NP with detection limit of 7 microg mL(-1 )and assay dynamic range of 18-300 microg mL(-1).     

Study of the development of thermoresistance in human pancreatic carcinoma cell lines using proteome analysis

In order to find candidate proteins that are potentially associated with the thermoresistant phenotype in combination with drug resistance, we analyzed the differential protein expression in vitro in the human pancreatic cancer cell line EPP85-181-P and classical and atypical multidrug-resistant variants and their thermoresistant counterparts using proteomics. This study identifies sets of proteins that may lead to the development of thermoresistance. These results provide a fundamental basis to elucidate the molecular mechanism of thermoresistance and chemoresistance phenomena that may assist the therapy of inoperable cancers.     

Toward a general route to the eunicellin diterpenes: the asymmetric total synthesis of deacetoxyalcyonin acetate

A novel approach to the hydroisobenzofuran core utilizing a TiCl4-mediated [4+3] annulation is reported. This [4+3] annulation protocol provides a short, general route to the hydroisobenzofuran core present in the eunicellin diterpenes. Using this annulation, a short synthesis (17 steps) of deacetoxyalcyonin acetate, a member of the eunicellin family, has been achieved.     

Controlled Reduction of Carboxamides to Alcohols or Amines by Zinc Hydrides

New protocols for controlled reduction of carboxamides to either alcohols or amines were established using a combination of sodium hydride (NaH) and zinc halides (ZnX₂). Use of a different halide on ZnX₂ dictates the selectivity, wherein the NaH‐ZnI₂ system delivers alcohols and NaH‐ZnCl₂ gives amines. Extensive mechanistic studies by experimental and theoretical approaches imply that polymeric zinc hydride (ZnH₂)_∞ is responsible for alcohol formation, whereas dimeric zinc chloride hydride (H?Zn?Cl)₂ is the key species for the production of amines.     

Direct aqueous photochemistry of isoprene high-NO(x) secondary organic aerosol

Secondary organic aerosol (SOA) generated from the high-NO(x) photooxidation of isoprene was dissolved in water and irradiated with λ > 290 nm radiation to simulate direct photolytic processing of organics in atmospheric water droplets. High-resolution mass spectrometry was used to characterize the composition at four time intervals (0, 1, 2, and 4 h). Photolysis resulted in the decomposition of high molecular weight (MW) oligomers, reducing the average length of organics by 2 carbon units. The average molecular composition changed significantly after irradiation (C(12)H(19)O(9)N(0.08) + hν → C(10)H(16)O(8)N(0.40)). Approximately 65% by count of SOA molecules decomposed during photolysis, accompanied by the formation of new products. An average of 30% of the organic mass was modified after 4 h of direct photolysis. In contrast, only a small fraction of the mass (<2%), belonging primarily to organic nitrates, decomposed in the absence of irradiation by hydrolysis. Furthermore, the concentration of aromatic compounds increased significantly during photolysis. Approximately 10% (lower limit) of photodegraded compounds and 50% (upper limit) of the photoproducts contain nitrogen. Organic nitrates and multifunctional oligomers were identified as compounds degraded by photolysis. Low-MW 0N (compounds with 0 nitrogen atoms in their structure) and 2N compounds were the dominant photoproducts. Fragmentation experiments using tandem mass spectrometry (MS(n), n = 2-3) indicate that the 2N products are likely heterocyclic/aromatic and are tentatively identified as furoxans. Although the exact mechanism is unclear, these 2N heterocyclic compounds are produced by reactions between photochemically-formed aqueous NO(x) species and SOA organics.     

Charge-transfer interactions in a multichromophoric hexaarylbenzene containing pyrene and triarylamines

Two different hexaarylbenzenes with three pyrene and three triarylamine substituents in different positions (trigonal symmetric and asymmetric arrangement) were synthesized, and their charge-transfer states were investigated by optical spectroscopy. In these multichromophoric systems triarylamine acts as the electron donor and pyrene as the electron acceptor. A reference chromophore with only one donor-acceptor pair was also investigated. All these chromophores form charge-transfer states upon photoexcitation which relax with a moderate fluorescence quantum yield to the ground state. The compounds do not differ significantly concerning most of their fluorescence properties, which shows that the fluorescent charge-transfer state is very similar in all chromophores. This observation indicates symmetry breaking for the symmetric chromophore within fluorescence lifetime of several tens of ns. This interpretation was substantiated by fluorescence excitation anisotropy measurements in a sucrose octaacetate matrix.     

Reactive quenching of OH A (2)Σ(+) by O(2) and CO: Experimental and nonadiabatic theoretical studies of H- and O-atom product channels

The outcomes following collisional quenching of electronically excited OH A (2)Σ(+) by O(2) and CO are examined in a combined experimental and theoretical study. The atomic products from reactive quenching are probed using two-photon laser-induced fluorescence to obtain H-atom Doppler profiles, O ((3)P(J)) atom fine structure distributions, and the relative yields of these products with H(2), O(2), and CO collision partners. The corresponding H-atom translational energy distributions are extracted for the H + O(3) and H + CO(2) product channels, in the latter case revealing that most of the available energy is funneled into internal excitation of CO(2). The experimental product branching ratios show that the O-atom producing pathways are the dominant outcomes of quenching: the OH A (2)Σ(+) + O(2) → O + HO(2) channel accounts for 48(3)% of products and the OH A (2)Σ(+) + CO → O + HCO channel yields 76(5)% of products. In addition, quenching of OH A (2)Σ(+) by O(2) generates H + O(3) products [12(3)%] and returns OH to its ground X (2)Π electronic state [40(1)%; L. P. Dempsey, T. D. Sechler, C. Murray, and M. I. Lester, J. Phys. Chem. A 113, 6851 (2009)]. Quenching of OH A (2)Σ(+) by CO also yields H + CO(2) reaction products [26(5)%]; however, OH X (2)Π (v(") = 0,1) products from nonreactive quenching are not observed. Theoretical studies characterize the properties of energy minimized conical intersections in four regions of strong nonadiabatic coupling accessible from the OH A (2)Σ(+) + CO asymptote. Three of these regions have the O-side of OH pointing toward CO, which lead to atomic H and vibrationally excited CO(2) products and∕or nonreactive quenching. In the fourth region, energy minimized points are located on a seam of conical intersection from the OH A (2)Σ(+) + CO asymptote to an energy minimized crossing with an extended OH bond length and the H-side of OH pointing toward CO in a bent configuration. This region, exoergic with respect to the reaction asymptote, is likely to be the origin of the dominant O + HCO product channel.     

Effect of flow on polymer-polymer miscibility

The effect of shear flow on the phase behaviour of partially miscible blends exhibiting a lower critical solution temperature behaviour has been investigated. Miscibility limits were detected, with and without the application of flow, as changes from optical clarity to turbidity using light scattering and as the appearance of double glass transition temperatures. Light scattering data were collected on a rheo-optical device that was designed to monitor phase changes in polymer blends undergoing shear flow between parallel glass plates in a temperature controlled environment. Glass transition temperatures of some quenched sheared blends were measured using a differential scanning calorimeter in order to confirm the conclusions from the light scattering data. It was found that shear induced demixing and shear induced mixing may be observed within the same blend depending on the magnitude of the applied flow. Miscibility gaps and closed miscibility loops may appear in the phase diagrams. At certain temperatures and shear rates unusual scattering patterns were observed and these were associated with a “ripple” morphology when directly viewed through the microscope.