Fast temperature programming in routine analysis of multiple pesticide residues in food matrices

Flash gas chromatographic (GC) analysis of 15 organophosphorus pesticides commonly occurring in food crops was performed using the Thermedics Detection EZ Flash upgrade kit installed in the oven of a HP 5890 Series II Plus gas chromatograph. The temperature program and splitless time period were the main parameters to be optimized. In the first set of experiments wheat matrix-matched standards were analyzed both by: (i) the flash GC technique (resistive heating of a 5 m capillary column), and (ii) the conventional GC technique (moderate oven temperature programming of a 30 m capillary column). Using the flash GC technique, the analysis time was reduced by a factor of more than 10 compared to the conventional GC technique. Dramatically improved detectability of analytes was achieved due to much narrower peak widths. The flash GC technique was compared with another approach to faster GC analysis employing a 5 m column and fast temperature programming with a conventional GC oven. In comparison with this alternative, in the case of flash GC significantly better retention time repeatability was observed. The other superiority of resistive heating is very rapid cooling down (i.e., equilibration to the initial conditions) which contributes to the increased sample throughput.     

Square-wave voltammetric determination of cefoperazone in a bacterial culture,pharmaceutical drug,milk, and urine

Use of square-wave voltammetry (SWV) for determination of cefoperazone (CFPZ) in some buffers, bacterial culture, urine, and milk is described. CFPZ provides a specific voltammetric signal which is affected by pH and solution components. Determination of CFPZ in Britton–Robinson buffer, pH 4.4, is sensitive with a low detection limit (about 0.5 nmol L^–1). In a more complex medium (bacterial 2YT medium, pH 7.2) the detection limit was approximately 1.5 mol L^–1. We provide evidence that SWV is a suitable and quick method for CFPZ determination in a culture of living bacteria without separation of biomass. We have found big differences between methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-sensitive Staphylococcus aureus (MSSA) in cultivation in the presence of CFPZ, depending on time. When CFPZ is cleaved by penicillinase, a new SWV peak b appears at more positive potentials. This peak rises both with increasing concentration of enzyme and with cleavage time while the original CFPZ peak is simultaneously decreasing. We determined the concentration of CFPZ in the drug Pathozone by the standard addition method and achieved good agreement with the declared value of CFPZ in the drug. With a simple pretreatment procedure it is possible to determine CFPZ in milk; for urine no pretreatment was required. Using SWV we could detect CFPZ concentrations as low as 500 nmol L^–1 in bovine milk and human urine.     

ICP-MS determination of heavy metals in submerged cultures of wood-rotting fungi

Accumulation of five heavy metal ions by five species of wood-rotting basidiomycetes during a 9-day cultivation was studied. Contents of Cd, Cu, Pb, and Zn were measured using ICP-MS; the amount of mercury was determined directly in solid samples using the Advanced Mercury Analyser. A standard operation procedure for the sample preparation and determination of metal content was developed and validated. Presence of Cd, Cu, Hg, and Pb decreased the accumulation of zinc by the fungi. The basidiomycete Pycnoporus cinnabarinus exhibited the highest metal binding capacity of all fungi tested.     

Isotachophoretic determination of stability constants of Ho and Y complexes with diethylenetriaminepentaacetic acid and 1,4,7,10-tetraazadodecane-N,N',N'',N'''-tetraacetic acid

The method of capillary isotachophoresis with conductivity detection was applied for the determination of the physico-chemical characteristics (conditional stability constants log beta') of holmium and yttrium complexes with DTPA (diethylenetriaminepentaacetic acid) and DOTA (1,4,7,10-tetraazadodecane-N,N',N',N'-tetraacetic acid). The log beta' determination is based on the linear relation between the stability constants of lanthanide-DTPA (lanthanide-DOTA) complexes and the reduction of the zone of the complex owing to the bleeding phenomena (liberating free metal ion). The stability constants calculated using this relationship are comparable with the literary data obtained by other methods for both holmium (log beta'(Ho-DTPA)=21.9, log beta'(Ho-DOTA)=24.5) and yttrium complexes (log beta'(Y-DTPA)=21.2, log beta'(Y-DOTA)=24.4). Capillary isotachophoresis was applied for the determination of the optimum composition of the reaction mixture (metal:ligand ratio) as well.     

Enantiomeric separation of dihydroxyphenylalanine (DOPA), methyldihydroxyphenylalanine (MDOPA) and hydrazinomethyldihydroxyphenylalanine (CDOPA) by using capillary electrophoresis with sulfobutyl ether-beta-cyclodextrin as a chiral selector

Capillary electrophoresis (CE) was successfully applied to the enantiomer resolution of racemic structurally related compounds, namely dihydroxyphenylalanine (DOPA), methyldihydroxyphenylalanine (MDOPA) and hydrazinomethyldihydroxyphenylalanine (CDOPA). The chiral resolution was performed in an untreated fused-silica capillary by using a phosphate buffer at pH 2.5 or 3.0 supplemented with sulfobutylated beta-cyclodextrin (SBE-CD). Resolution was strongly influenced by the concentration of the chiral selector added to the background electrolyte. In fact, 2-5 mM of SBE-CD enabled the resolution of DOPA and MDOPA enantiomers, while CDOPA optical isomers were resolved by using either 0.5 mM or 6-20 mM of SBE-CD. The latter separation conditions (reversed polarity mode) made it possible to obtain inversion of migration order.     

Automatic kinetic determination of Hg(II) by anodic stripping potentiometry with constant current oxidation

A new kinetic method for the determination of Hg(II) is proposed. It is based on the kinetic evolution of the anodic stripping potentiometric curves yielded by a gold electrode previously coated with mercury upon passage of constant electrical currents. The method features a linear determination range between 40 and 800 ppb of Hg(II) and a relative standard deviation of 5% (n = 9) for a mercury concentration of 200 ppb. The experiments were conducted on a customized automatic set-up, and instrumentation, data acquisition and processing were all governed by means of a QBASIC program (PSAKINEL) written by the authors.     

Structure analysis of intercalated layer silicates: combination of molecular simulations and experiment

Na(+)-montmorillonite type Wyoming, cloisite Na(+) from Southern Clay Products, Inc., was intercalated (i) with octadecylammonium cations and subsequently intercalated with octadecylamine molecules, (ii) with dodecylamine molecules, and (iii) with octylamine molecules to determine the applicability of these intercalates for nanocomposite materials on the base of polymer/clay. The structures were determined on the basis of a combination of results from X-ray diffraction and molecular simulations. The calculated values of basal spacings are in good agreement with experimental basal spacings when experimental samples were prepared. The interlayer space of intercalated montmorillonite shows a monolayer or bilayer arrangement of alkyl chains in dependence on the concentration of the intercalation solution. The values of the total sublimation energy, interaction energy, and exfoliation energy were calculated for all investigated samples. Low values of exfoliation energies lead to better exfoliation of intercalated silicate layers and this material appears suitable for use as a precursor for polymer/clay nanocomposites. The values of exfoliation energy for the investigated samples show that montmorillonite intercalated with dodecylamine or octadecylamine molecules is suitable for exfoliation of silicate layers.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Determination of gamma-hydroxybutyric acid in human urine by capillary electrophoresis with indirect UV detection and confirmation with electrospray ionization ion-trap mass spectrometry

γ-Hydroxybutyric acid (GHB), a minor metabolite or precursor of γ-aminobutyric acid (GABA), acts as a neurotransmitter/neuromodulator via binding to GABA receptors and to specific presynaptic GHB receptors. Based upon the stimulatory effects, GHB is widely abused. Thus, there is great interest in monitoring GHB in body fluids and tissues. We have developed an assay for urinary GHB that is based upon liquid–liquid extraction and capillary zone electrophoresis (CZE) with indirect UV absorption detection. The background electrolyte is composed of 4 mM nicotinic acid (compound for indirect detection), 3 mM spermine (reversal of electroosmosis) and histidine (added to reach a pH of 6.2). Having a 50 μm I.D. capillary of 40 cm effective length, 1-octanesulfonic acid as internal standard, solute detection at 214 nm and a diluted urine with a conductivity of 2.4 mS/cm, GHB concentrations ≥2 μg/ml can be detected. Limit of detection (LOD) and limit of quantitation (LOQ) were determined to be dependent on urine concentration and varied between 2–24 and 5–60 μg/ml, respectively. Data obtained suggest that LOD and LOQ (both in μg/ml) can be estimated with the relationships 0.83 κ and 2.1 κ, respectively, where κ is the conductivity of the urine in mS/cm. The assay was successfully applied to urines collected after administration of 25 mg sodium GHB/kg body mass. Negative electrospray ionization ion-trap tandem mass spectrometry was used to confirm the presence of GHB in the urinary extract via selected reaction monitoring of the m/z 103.1→m/z 85.1 precursor–product ion transition. Independent of urine concentration, this approach meets the urinary cut-off level of 10 μg/ml that is required for recognition of the presence of exogenous GHB. Furthermore, data obtained with injection of plain or diluted urine indicate that CZE could be used to rapidly recognize GHB amounts (in μg/ml) that are ≥ 4 κ.