New phosphite-oxazoline ligands for efficient Pd-catalyzed substitution reactions

We have designed and synthesized a new family of readily available highly modular phosphite-oxazoline ligands for the Pd-catalyzed asymmetric allylic substitution reactions. The introduction of a pi-acceptor flexible bulky biphenyl phosphite moiety in the ligand design is highly adventitious in the product outcome. Thus, this ligand series affords excellent reaction rates (TOF's up to >2400 mol.(mol.h)-1) and enantioselectivities (ee's up to >99%) and, at the same time, shows a broad scope for different substrate types.     

Entropy factor in the hopping frequency for ionic conduction in oxide glasses induced by energetic clustering

The contribution of configurational entropy to the effective hopping frequency of ionic transport in amorphous systems is discussed. The effective rate of ion hopping has been extracted from the onset frequency of the ac conductivity measured in ionically conducting silicate glasses. Both the onset frequency and the dc conductivity exhibit Arrhenius-type thermal activation with similar values for the activation energy, DeltaEa=0.65+/-0.3 eV. The prefactor of the onset frequency results in nu0'=(1.05+/-0.05)x10(11) Hz, which is much lower than characteristic vibrational frequencies (10(13) Hz). Following standard hopping percolation theory, the long-range motion is dominated by a fraction of high-energy barriers that connect clusters of faster sites. The multiplicity of equivalent sites for ion hop entails a retardation of the effective jumping time with respect to the elementary hop. This effect can be assimilated into a negative activation entropy term in the frequency prefactor of the ion hopping rate, which depends on the features of energy clustering and accounts for the wide dispersion of nu0' reported for many conducting glasses. The model implies an effective percolation length of Lc approximately 7 nm, in good agreement with previous works.     

Synthesis and photoluminescent properties of 1,1'-binaphthyl-based chiral phenylenevinylene dendrimers

New chiral, soluble binaphthyl derivatives that incorporate stilbenoid dendrons at the 6,6'-positions have been prepared. The synthesis of the new enantiopure dendrimers was performed in a convergent manner by Horner-Wadsworth-Emmons (HWE) reaction of the appropriately functionalized 1,1'-binaphthyl derivative (R)-1 and the appropriate dendrons (R)(2n)G(n)-CHO. Different electroactive units were incorporated in the peripheral positions of the dendrons in order to tune both the optical and electrochemical behavior of these systems. Fluorescence measurements on the chiral dendrimers reveal a strong emission with maxima between 409 and 508 nm depending upon the substitution pattern. Finally, the redox properties of the dendrimers were determined by cyclic voltammetry, showing the influence of the functional groups at the peripheral positions of the dendrimer on the redox behavior of these systems.     

Chemoenzymatic dynamic kinetic resolution of beta-halo alcohols. An efficient route to chiral epoxides

Enzymatic resolution of beta-chloro alcohols in combination with ruthenium-catalyzed alcohol isomerization led to a successful dynamic kinetic resolution (conversion up to 99% and ee up to 97%). The efficiency of the DKR is dramatically reduced when beta-bromo alcohols are used. The presence of the bromo substituent causes decomposition of the ruthenium catalysts, which triggers the progressive deactivation of the enzyme. The synthetic utility of this procedure has been illustrated by the practical synthesis of different chiral epoxides.     

Preparation and characterization of silicate gel glasses containing Cr2O3

The effect of thermal treatment on the structural incorporation of Cr₂O₃ in xCr₂O₃·(100 – x)SiO₂ and 5R _n O·xCr₂O₃·(95 – x)SiO₂ (where x=0.01–1 mol.% and R=Li, Na and Ca) gel glasses was studied by optical absorption spectrophotometry, DTA-TG, XRD and electron microscopy.Samples heat treated at 60°C have green color due to the presence of Cr³⁺ in octahedral coordination. The optical transmission, and color (yellow, orange or ambar), of the samples heat treated between 200 and 700°C prove that Cr³⁺ (octahedrally coordinated) and Cr⁶⁺ (tetrahedrally coordinated) are both present. Segregation of Cr₂O₃ take place at temperatures above 800°C.In reducing conditions the gel glasses were green due to the presence of a high content of Cr³⁺ ions. Samples containing Li or Na show crystalline phases at temperatures below 850°C.     

Therapeutic monitoring of imipramine and desipramine by micellar liquid chromatography with direct injection and electrochemical detection

A micellar liquid chromatographic (MLC) procedure was developed for the clinical monitoring of imipramine and its active metabolite, desipramine. The determination of these highly hydrophobic substances was carried out after direct injection of the serum samples using a mobile phase composed of 0.15 m SDS--6% (v/v) pentanol buffered at pH 7, pumped at 1.5 mL/min into a C(18) column (250 x 4.6 mm), and electrochemical detection at 650 mV. Using this MLC method, calibration was linear (r > 0.995) and the limits of detection (ng/mL) were 0.34 and 0.24 for imipramine and desipramine, respectively. Repeatabilities and intermediate precision were tested at three different concentrations in the calibration range and a CV (%) below 2.2 was obtained. In this MLC procedure, the serum is determined without treatment, thus allowing repeated serial injections without changes in retention factors, and reducing the time and consumables required to carry out the pretreatment process. The assay method can be applied to the routine determination of serum imipramine and its metabolite in therapeutic drug monitoring.     

The influence of the shape of Au nanoparticles on the catalytic current of fructose dehydrogenase

Graphite electrodes were modified with triangular (AuNTrs) or spherical (AuNPs) nanoparticles and further modified with fructose dehydrogenase (FDH). The present study reports the effect of the shape of these nanoparticles (NPs) on the catalytic current of immobilized FDH pointing out the different contributions on the mass transfer–limited and kinetically limited currents. The influence of the shape of the NPs on the mass transfer–limited and the kinetically limited current has been proved by using two different methods: a rotating disk electrode (RDE) and an electrode mounted in a wall jet flow-through electrochemical cell attached to a flow system. The advantages of using the wall jet flow system compared with the RDE system for kinetic investigations are as follows: no need to account for substrate consumption, especially in the case of desorption of enzyme, and studies of product-inhibited enzymes. The comparison reveals that virtually identical results can be obtained using either of the two techniques. The heterogeneous electron transfer (ET) rate constants (k_S) were found to be 3.8 ± 0.3 s⁻¹ and 0.9 ± 0.1 s⁻¹, for triangular and spherical NPs, respectively. The improvement observed for the electrode modified with AuNTrs suggests a more effective enzyme-NP interaction, which can allocate a higher number of enzyme molecules on the electrode surface.

The shape of gold nanoparticles has a crucial effect on the catalytic current related to the oxidation of D-(-)-fructose to 5-keto-D-(-)-fructose occurring at the FDH-modified electrode surface. In particular, AuNTrs have a higher effect compared with the spherical one.

     

Simplified procedures for the analysis of polycyclic aromatic hydrocarbons in water, sediments and mussels

We describe in this paper simple and robust analytical protocols to determine the 16 polycyclic aromatic hydrocarbons (PAHs) of the US Environmental Protection Agency priority list in water, sediment and mussels. For water samples, eight different solid-phase extraction (SPE) sorbents have been compared and among them, C18 provided highest recoveries and limits of detection of 0.3-15 ng/L. For lyophilized sediments, Soxhlet and ultrasonic extraction were compared, and the last one permitted to recover all analytes with highest repetitivity and was validated by analysing a certified reference material. Finally, the analysis of mussels was undertaken using Soxhlet, ultrasonic and pressurized liquid extraction (PLE) and the performance of several clean-up steps are compared. Whereas for the former two, incomplete recovery or losses of some analytes were evidenced, PLE permitted a more efficient extraction and although alkaline digestion was necessary to remove coextracted compounds, the method gave acceptable recoveries and limits of detection of 0.5-7.7 microg/kg dry mass, as for sediments. In all cases, analysis was performed by gas chromatography coupled to mass spectrometry and internal standard quantification was performed using five deuterated PAHs. Each method performance is discussed for the three matrices analysed and the paper reports advantages and disadvantages of each for their routine application in monitoring programs.     

TEMPO-promoted Pauson-Khand reaction. Single-electron activation of cobalt-carbonyl bonds?

[reaction: see text] The Pauson-Khand reaction is notably accelerated by TEMPO. According to DFT calculations, TEMPO could trigger a radical, low-energy pathway for the reaction by facilitating the decarbonylation of doublet complexes arising either from a CO/nitroxide exchange or from nitroxide addition to a CO ligand.     

Ring-closing metathesis of chiral allylamines. Enantioselective synthesis of (2S,3R,4S)-3,4-dihydroxyproline

The ring-closing metathesis (RCM) of two types of unsaturated chiral allylamines III, easily available from enantiomerically enriched epoxy alcohols, has been studied. Fully protected allylamines IIIa [(1)R = CH(2)-(CH(2))(n)()-CH=CH(2); (2)R = Boc; (3)R = PMB] have been prepared from unsaturated epoxy alcohols, whereas bis-allylamines IIIb ((1)R = Ph, (2)R = allyl,(3)R = Boc or PMB) have been prepared from 2,3-epoxy-3-phenylpropanol. Both types have been subjected to RCM to provide either cyclic allylamine I or II. The synthetic potential of these intermediates has been demonstrated by the enantioselective synthesis of (2S,3R,4S)-3,4-dihydroxyproline.