Isotope dilution analysis in the micro and submicro range by double-labelling and precipitation on paper

A new variation of isotope dilution analysis based on double labelling and carried out on filter paper is described. The determination of microgram and submicrogram amounts of silver (labelled with (110m)Ag) by precipitation with iodide (labelled with (131)I) and of calcium (labelled with (45)Ca) by precipitation with phosphate (labelled with (32)P) are given as examples. In the first example the two radio-elements ((110m)Ag and (131)I) are measured by gamma-spectrometry, in the second one ((45)Ca and(32)P) by a beta-absorption method. A number of results show the usefulness of the method.     

Katalytische Reaktionen in der Spurenanalyse und Untersuchung ihrer Mechanismen. III. Über das Landoltsche Prinzip

Zusammenfassung Durch die Einführung von Landoltschen Reaktionen auf Brom- bzw. Chlorgrundlage kann festgestellt werden, daß die heute bekannten Landoltschen Reaktionen, ganz allgemein gesprochen, katalytische Systeme sind. Die heute bekannten Landoltschen Redoxreaktionen sind im wesentlichen halogenkatalytische Reaktionen. Die Landoltschen Reaktionen auf Säure-Basen-Grundlage sind Fälle der Säure-Basen-Katalyse. Die ursprüngliche Landoltsche (Jodat-Sulfit-)Reaktion und analoge Reaktionen sind autokatalytische Systeme.

---

Summary By applying Landolt reactions to bromo- or chloro-based materials it was found that the now familiar Landolt reactions are catalytic systems in the general sense. The Landolt redox reactions known at present are essentially halogeno-catalytic reactions. The Landolt reactions on acid-base basis are instances of acid-base catalysis. The original Landolt (iodatesulfite) reaction and analogous reactions are autocatalytic systems.

     

Membrane extraction of pertechnetate with quaternary ammonium salts comparison with solvent extraction

The liquid membrane extraction (MX) and the solvent extraction (SX) of pertechnetate with Aliquat 336 as a carrier has been studied. From the results of SX the percentage of pertechnetate in the inner solution in experiment with LM was proposed. It has been found that the pertraction of pertechnetate depends on the inner solution used and the most effective solutions were those with ClO ₄ ^– and SCN^–. Effects of the carrier concentration in membranes and outer phase composition have been studied too. The results of these experiments were kinetic curves with a minimum, which may be interpreted as a result of competing processes in the systems.     

Derivatographische untersuchungen über die thermische zersetzung von pyridin,isochinolin, αα-dipyridyl und o-phenantrolin,bzw. bichromatoder chromat-ion enthaltenden metallkomplexen: II. Zink(II)-, cadmium(II)- und mangan(II)-komplexe III. Quecksilber(I und II)-, uranyl-, thorium-, lanthan- und eisen-komplexe

Complexes were prepared of zinc(II), cadmium(II), manganese(II) mercury (I and II), uranium, thorium(IV), lanthanum and iron ions with pyridine, isoquinoline, αα-dipyridyl, or o-phenanthroline ligands and bichromate or chromate ions as described on pp. 205–207 of Ref. 1.     

Static light scattering from microgel particles: model of variable dielectric permittivity

We perform static light scattering experiments on a dilute suspension of microgel particles and model the resultant form factors Pq by assuming an exponentially decaying dielectric permittivity. The result is that Pq is a Lorentzian function of the scattering wavevector q for length scales greater than the particle size; the width approximately corresponding to twice the particle radius. This simple model reasonably accounts for scattered light from both swollen and shrunken microgel phases.     

Theoretical strategy to provide atomistic models of comblike polymers: a generation algorithm combined with configurational bias Monte Carlo

A computational strategy to model the amorphous phase of comblike polymers is presented. The strategy, denoted SuSi/CB (CB-configurational bias), combines the strength of an algorithm recently developed to generate reliable microstructures of dense amorphous polymers, which is based on a random search of energy minima, and configurational bias Monte Carlo method. The influence of different parameters used to define the characteristics of SuSi/CB on both the reliability of the generated structures and the computational effort has been examined in detail. Finally, we have modeled and characterized the supramolecular organization of poly(octadecyl acrylate) in the amorphous state.     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

Determination of some trace elements in human tooth enamel

Determination of seven elements (Cu, Fe, Mg, Mn, Pb, Sr and Zn) in whole enamel and surface layers of extracted non-carious human teeth by FAAS, ETA AAS, ICP-AES and ICP-MS (Pb) is demonstrated. Techniques are described for obtaining whole enamel and its acid dissolution. Fifty microm width enamel layers from outer enamel surface to a 200 microm depth were successively etched in 1 mL of 3 M HClO4 for 3 min dissolution periods. Enamel samples were analyzed for populations under and over 20 years of age and enamel from Bronze Age teeth. Concentrations of microelements in the whole enamel and in the first surface layer (50 microm depth) were compared. With exception of Sr and Mg, all elements show significantly higher concentrations in the first layer than in whole enamel and higher concentration in teeth of individuals over 20 years, which demonstrate the cumulative effect of these elements. The Cu, Fe, Mn, Pb and Zn concentrations in four layers of erupted and non-erupted teeth decreased while Mg and Sr concentrations increased toward enamel-dentine junction. The concentrations of most elements were almost constant as they approached the 150 microm layer. This concentration gradient may result from interaction between saliva and teeth and supports the hypothesis that the surface de- and re-mineralization process is effective at most to 150 microm from the enamel surface.     

Coordination polymers. IX

Poly-(butanediol-1,4-adipate) and poly-(diethyleneglycol-succinate) polyesters and their ionized derivatives, containing Mg²⁺ and Zn²⁺ ions with different stoichiometric ratios to the chain-end COOH groups of the polyesters have been investigated by derivatograph.The thermal decompositions of the metal-containing polyesters differ significantly from those of the unionized polyesters. These differences are connected with the chemical repeating unit of the polyesters and the chemical nature of the metal ions, and proportional to the amount of the latter.An explanation is given of the catalytic effect of metal ions on the process of decomposition of the polyesters.

---

Zusammenfassung Poly-(butandiol-1,4-adipat) und Poly-(diethylenglycolsuccinat) polyester und ihre «ionisierten» Derivate — mit Mg²⁺ — und Zn²⁺-Ionengehalt in verschiedenen stöchiometrischen Verhältnissen zu den endständigen COOH-Gruppen der Polyester — wurden im Derivatographen untersucht.Die thermische Zersetzung der metallhaltigen Polyester unterscheidet sich wesentlich von nicht-ionisierten Polyestern. Diese Unterschiede sind mit den sich wiederholenden chemischen Einheiten der Polyester und der chemischen Beschaffenheit der Metallionen verbunden, und proportional dem Anteil derselben.Es wird eine Erklärung des katalytischen Effekts der Metallionen auf den Zersetzungsvorgang der Polyester gegeben.

---

-1,4 «» , Mg²⁺ Zn²⁺ . , «» . . .