Measurement of surface topography by RGB Shadow-Moiré with direct phase demodulation

In this paper we present the application of a direct demodulation method for the measurement of surface topography by means of Shadow-Moiré. In our set-up, we use three LEDs (with green, red and blue peak wavelengths) to illuminate the grating. Due to the different position of these light sources, a polychromatic Shadow-Moiré fringe pattern is produced, which can be described as the superposition of three monochromatic (red, green and blue) fringe patterns. Taking the image of this polychromatic fringe pattern with a RGB CCD camera, we get a monochromatic fringe pattern stored at each RGB channel of the CCD. The direct demodulation algorithm employed uses these fringe patterns to calculate the wrapped phase map. After unwrapping the phase map using a standard multi-grid technique, we implemented an automatic procedure to detect the area of interest of the phase map by removing low modulation zones and to calculate the absolute value of the phase. In this way it is possible to determine the topography of a surface with a single RGB snapshot maintaining a simple experimental set-up, which is an important feature, especially for the study of dynamic phenomena such as deformations. We present the experimental results obtained after measuring different objects with both smooth and rough surface textures.     

Microperforated insertion units: An alternative strategy to design microperforated panels

Microperforated panels (MPPs) coupled to a rigid wall have been proposed recently as an alternative to porous absorbers in situations having concerns with bacterial contamination and small particles discharge, like food, pharmaceutical and microelectronic industries. There exists also an increasing interest for MPP absorbers in the transportation industry and civil engineering. In general, an optimally designed MPP with good broadband absorption requires many submillimetric holes distributed over a panel of also submillimetric thickness. Such thin plates or foils become so fragile that they need to be protected from mechanical damage. In this paper, an alternative strategy is investigated which allows the design of MPPs with panels of millimetric thickness while maintaining their acoustic performance. These absorbers, named microperforated insertion units (MIUs), avoid the structural problems of the classical MPPs. An assessment of the sound absorption properties of these structures is presented. Comparisons between calculations and measurements are also made under two experimental conditions: plane waves at normal incidence (impedance tube) and free field (anechoic room).     

The electrochemical reduction of perezone in the presence of benzoic acid in acetonitrile

An electrochemical study using transient techniques of a quinone-type natural product, perezone, has been performed in acetonitrile and in the presence of benzoic acid. Using linear sweep voltametry and single potential step chronoamperometry, it was possible to establish that the reduction mechanism of perezone involves a monoelectronic charge-transfer step, followed by a protonation step and homogeneous charge transfer due to disproportionation of the protonated intermediate. The mechanism for the homogeneous charge-transfer step was found to be of the type DISP1 (disproportionation order one) from the results of double potential step chronoamperometry experiments. The occurrence of the DISP1 mechanism was provoked by the mildly acidic medium used in this study.     

Precise bounds and asymptotics for the first Dirichlet eigenvalue of triangles and rhombi

We study the asymptotic expansion of the first Dirichlet eigenvalue of certain families of triangles and of rhombi as a singular limit is approached. In certain cases, which include isosceles and right triangles, we obtain the exact value of all the coefficients of the unbounded terms in the asymptotic expansion as the angle opening approaches zero, plus the constant term and estimates on the remainder. For rhombi and other triangle families such as isosceles triangles where now the angle opening approaches π, we have the first two terms plus bounds on the remainder. These results are based on new upper and lower bounds for these domains whose asymptotic expansions coincide up to the orders mentioned. Apart from being accurate near the singular limits considered, our lower bounds for the rhombus improve upon the bound by Hooker and Protter for angles up to approximately 22° and in the range (31°,54°). These results also show that the asymptotic expansion around the degenerate case of the isosceles triangle with vanishing angle opening depends on the path used to approach it.     

Integrated Groups and Smooth Distribution Groups

In this paper, we prove directly that α-times integrated groups define algebra homomorphisms. We also give a theorem of equivalence between smooth distribution groups and α-times integrated groups.     

Improvement of the properties of polyarylate reinforced with liquid crystalline polymers

Blends of polyarylate of bisphenol A, PAr, with two commercial main chain liquid crystalline polymers, Vectra A950 and Vectra B950, are studied. From dynamic viscoelastic measurements it is deduced that both systems (PAr/Vectra A950 and PAr/Vectra B950) are immiscible and scanning electron microscopy (SEM) micrographs show the presence of spherical domains of the liquid crystalline polymer when PAr constitutes the matrix. Extrusion capillary measurements reveal that, under conditions of temperature and shear rate similar to those of processing, the viscosity is reduced to approximately 10% of its value when the content of liquid crystalline polymer is only 20%. This great improvement of the rheological properties is observed in both PAr/Vectra A950 and PAr/Vectra B950 blends. The effect of draw ratio on Young's modulus for different compositions is also analyzed, pointing out the reinforcing action of both liquid crystalline polymers on polyarylate: for instance, 20% of Vectra B950 in the blend gives rise to a 700% increase of the modulus of fibres prepared at a draw ratio of 50. SEM of the extrudates reveals that the spherical domains are elongated at the entrance of the capillary giving rise to a microfibrillar morphology which is related to the excellent rheological and mechanical properties of the blends.     

采用热处理方法提高MEH-PPV单层聚合物有机发光二极管发光性能的研究

对以MEH－PPV为发光层的单层聚合物有机发光二极管（OLED）器件在最佳条件下进行真空热处理，并用金相显微镜观察施加电压后器件的阴极表面形貌。发现处理后的器件阴极表面的气泡及黑斑明显减少。器件的发光性能显著提高。与未经处理的器件相比，最大相对发光强度提高了一个数量级、启亮电压降低了2．0V，半寿命提高了12．7倍。初步分析表明热处理方法提高器件发光性能的主要原因在于有效地减少了器件在工作过程中由于焦耳热产生的某些气体，从而减少阴极表面气泡及黑斑的出现，另一方面，热处理方法也增强了有机发光层与阴极接触界面的结合力，提高电子注入水平。     

Multicommuted fluorometric multiparameter sensor for simultaneous determination of naproxen and salicylic acid in biological fluids.

A combined approach based on solid-phase optosensing and multicommutation principles has been applied to develop a method for the simultaneous analysis of two pharmaceuticals (naproxen and salicylic acid) in biological fluids. The multicommuted flow-through optosensor was based on direct native fluorescence measurements of both analgesics using a non-polar sorbent (C18 silica gel) as a solid sensing zone. The flow system was controlled by Java-written home-made software and designed using three-way solenoid valves for an independent automated manipulation of sample and carrier solutions. Using an optimized sampling time, the method was calibrated in the range of 1 - 25 and 5 - 200 ng mL(-1). The obtained detection limits were 0.3 and 1.3 ng mL(-1) for naproxen and salicylic acid, respectively, with RSD (%) values of better than 2% for both analytes. The proposed methodology was successfully applied to urine, serum and pharmaceutical preparations. Recovery percentages ranging from 96.1 to 104% were obtained for both analytes.     

Heuristics and look-ahead integration to solve constraint satisfaction problems efficiently

Logic programming languages, such asProlog, allow a declarative specification of Constraint Satisfaction Problems (CSPs), freeing the user from specifying more or less complex control directives. However, the price to pay for such flexibility is a loss of efficiency, which makes Logic Programming inadequate to solve CSPs of even moderate size and complexity. To extend the range of applicability of logic programming, several improvements have been proposed. The use of heuristics is one such improvement. Although this usually forces the user to specify some form of control (thus abandoning the pure declarative nature of a logic program), these specifications can be made declarative by making use of some appropriate meta-predicates. Another extension to logic programming that improves its efficiency, is the active use of constraints, as done in the various formulations of constraint logic programming languages. In particular, the use of finite domains is quite adequate to implement look-ahead schemes to efficiently solve several types of CSPs. In this paper, we discuss the complementary nature of heuristics and look-ahead schemes and present a constraint logic programming framework that integrates both these techniques. Results obtained with a time-tabling problem executed on a prototype that implements such a framework are presented, and show that significant efficiency improvements can be achieved when compared with the separate use of the two techniques.