Local dynamic mechanical properties in model free-standing polymer thin films

High-frequency sinusoidal oscillations of a coarse-grained polymer model are used to calculate the local dynamic mechanical properties (DMPs) of free-standing polymer thin films. The storage modulus G(') and loss modulus G(") are examined as a function of position normal to the free surfaces. It is found that mechanically soft layers arise near the free surfaces of glassy thin films, and that their thickness becomes comparable to the entire film thickness as the temperature approaches the glass transition T(g). As a result, the overall stiffness of glassy thin films decreases with film thickness. It is also shown that two regions coexist in thin films just at the bulk T(g); a melt-like region (G(')G(")) in the middle of the film. Our findings on the existence of a heterogeneous distribution of DMPs in free-standing polymer thin films provide insights into recent experimental measurements of the mechanical properties of glassy polymer thin films.     

喷雾热解法合成球形(Y,Gd)BO3:Eu荧光粉的研究

采用喷雾热解法合成了无团聚的球形(Y,Gd)BO3∶Eu荧光粉。研究了各因素对(Y,Gd)BO3∶Eu荧光粉体的结晶性能、外观形貌及发光强度的影响。结果表明,按120%硼酸的化学计量比于900℃喷雾热解,再经过1200℃后处理2 h,可以合成结晶良好的(Y,Gd)BO3∶Eu荧光粉体;喷雾热解溶液的浓度和载气流量对荧光粉的外观形貌影响较大;铕含量为10%时可以获得最佳的发光强度。在优化喷雾热解实验条件下成功合成出良好发光强度的PDP用(Y0.6Gd0.3)BO3∶Eu0.1荧光粉。     

Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.     

Molecular modeling study of the differential ligand–receptor interaction at the μ, δ and κ opioid receptors

3D models of the opioid receptors , and were constructed using BUNDLE, an in-house program to build de novo models of G-protein coupled receptors at the atomic level. Once the three opioid receptors were constructed and before any energy refinement, models were assessed for their compatibility with the results available from point-site mutations carried out on these receptors. In a subsequent step, three selective antagonists to each of three receptors (naltrindole, naltrexone and nor-binaltorphamine) were docked onto each of the three receptors and subsequently energy minimized. The nine resulting complexes were checked for their ability to explain known results of structure-activity studies. Once the models were validated, analysis of the distances between different residues of the receptors and the ligands were computed. This analysis permitted us to identify key residues tentatively involved in direct interaction with the ligand.     

Synthesis and Crystal Structure of （Et4N）2[Pd2（mp）2（mpH）2]

ＳｙｎｔｈｅｓｉｓａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆ（Ｅｔ_４Ｎ）_２［Ｐｄ_２（ｍｐ）_２（ｍｐＨ）_２］ＳｈｉＪｉ－Ｃｈｅｎｇ；ＨｕａｎｇＸｉａｏ－Ｙｉｎｇ；ＷｅｎＴｉｎｇ－Ｂｉｎ；ＤｅｎｇＹｕ－Ｈｅｎｇ；ＣｈｅｎｇＣｈａｎｇ－Ｎｅｎｇ；Ｌｉ?..     

Passivation of the calcite surface with malonate ion

Samples of polycrystalline calcite were impregnated with solutions of malonic acid of three concentrations (5 x 10(-2), 5 x 10(-3) , and 5 x 10(-4) M) and different pH values (6.00, 7.00, and 8.00). The impregnation was carried out at room temperature to evaluate the adsorption of malonate ion in the calcite surface to optimize the conditions for possible application on limestone and marble in cultural heritage materials. The affinity of the malonate ion was determined through the potentiometric measurement of the surface charge and the corresponding adsorbed amounts by titration, Raman spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate effective adsorption of the malonate ion on the surface at a pH value close to the point of zero charge (pHpzc approximately 8.20) and changes in some surface morphological properties such as the pore shape and the pore size distribution. The presence of a malonate adsorptive layer on calcite generates an interface interaction potential that may influence the reaction and transport mechanisms within the medium.     

Determination of acetone, hexanal and heptanal in blood samples by derivatization with pentafluorobenzyl hydroxylamine followed by headspace single-drop microextraction and gas chromatography–mass spectrometry

In the study, we developed a simple, rapid, sensitive, and inexpensive method for determination of the disease biomarkers of acetone, hexanal and heptanal in human blood. For the first time, derivatization of carbonyls with O-2,3,4,5,6-(pentafluorobenzyl)hydroxylamine (PFBHA) was combined with headspace single-drop microextractin (HS-SDME) and gas chromatography-mass spectrometry (GC–MS) and applied to the analysis of acetone, hexanal, and heptanal in human blood. At first, acetone, hexanal and heptanal in blood were derivatized with PFBHA and formed oximes in several seconds. Sequentially, the oximes were headspace extracted and concentrated by a microdrop solvent. Finally, the extracted oximes were analyzed by GC–MS. HS-SDME conditions and method validations were studied. Due to needing of only 2 μl organic solvent, short extraction time of 8 min, and simple operation, derivatization-HS-SDME was shown to be a rapid, simple, and inexpensive technique for analysis of acetone, hexanal, and heptanal in human blood. Moreover, it had low detection limit values from 0.24 to 0.62 nM, and good reproducibility (R.S.D. less than 12%).