Preliminary study on dual fluorescence behavior of porphyrin

It is well known that porphyrin derivatives play a key role in the primary process of photo-synthesis[1], in which porphyrins directly absorb the sunlight or indirectly acquire excitation en-ergy from light-harvesting antenna system to reach their excited state, and then donate electrons to quinone acceptors to yield a series of charge-separated species. In general, only first singlet ex-cited state of porphyrins is involved in energy transfer process[2]. However, highly excited state (S2 stat…     

西印度蔗螟聚集信息素次要组份合成方法的改进

2-甲基-4-庚醇和2-甲基-4-辛醇是西印度蔗螟(Metamasiushemipterus)聚集信息素的次要组份，本文以天然产物(S)-亮氨酸为原料合成出了2-甲基-4-庚醇及2-甲基-4-辛醇的所有对映异构体，其关键步骤是由(2S)-4-甲基-1,2-戊二醇合成出(2S)和(2R)-4-甲基-1,2-环氧戊烷两种重要中间体，目标产物光学纯度可达95%以上。     

Influence of the preparation procedure on the properties of polyaniline based magnetic composites

A versatile process for the preparation of composite films consisting of magnetite (Fe₃O₄) nanoparticles embedded in a polyaniline (PANI) matrix is reported. Spectroscopic properties of polyaniline matrix (PANI-EB), polyaniline protonated with camphor sulfonic acid (PANI-CSA_0.5) PANI-ES and PANI/Fe₃O₄-CSA_0.5 composites were studied, both in the state of the solutions of m-cresol and in thin films processed from the same solvents. The results of these studies indicate that m-cresol can be used for PANI/Fe₃O₄ composite preparation. Such films show both reasonably high electrical conductivity and magnetic permeability. A controlled application of a magnetic field during the casting process resulted in the formation of the materials with an unusual combination of magnetic and transport properties. The obtained films show the behavior that can be explained by the presence of both ferromagnetic and paramagnetic phases. The superparamagnetic contribution, if any, is very small. Application of the external magnetic field during fabrication of the composites stimulates creation of the aggregates of magnetic particles which, although keeps conductivity at a relatively high level, leads to a small decrease of the conductivity value.     

Interface characteristics in diffusion bonding of Fe3Al with Cr18-Ni8 stainless steel

Fe3Al and Cr18-Ni8 stainless steel were diffusion-bonded in vacuum and a Fe3Al/Cr18-Ni8 interface with reaction layer was formed. Microstructure in the reaction layer at Fe3Al/Cr18-Ni8 interface was analyzed by means of scanning electron microscope (SEM) and electron probe micro-analyzer (EPMA). The growth of reaction layer with heating temperature (T) and holding time (t) was researched. The results indicate that FeAl, Fe3Al, Ni3Al, and alpha-Fe (Al) solid solution are formed in the reaction layer. These phases are favorable to promote the element diffusion and to accelerate the formation of the reaction layer at Fe3Al/Cr18-Ni8 interface. The growth of reaction layer obeys the parabolic law and its thickness (X) is expressed by X2 = 7.5 x 10(-4)exp(-83.59/RT)(t - t0).     

High-performance liquid chromatography of amino acids, peptides and proteins CXXV. Molecular dynamics simulation of n-butyl chains chemically bonded to silica-based reversed-phase high-performance liquid chromatography sorbents

The molecular dynamics method has been applied to investigate the conformations of n-butyl ligands immobilised onto an amorphous silica surface analogous to those utilised with silica-based RP-HPLC sorbents. Three systems were constructed which corresponded to ligand densities of 1.64, 2.67 and 3.69 μmol/m². A number of parameters related to the structure of the sorbent materials were derived in order to characterise the molecular properties of each system. These parameters included the hydrocarbon layer thickness, the frequency of gauche conformations, the distance distribution for carbon atoms and the diffusion coefficients of individual atoms in the n-butyl ligands. From these properties, the positions of chains with respect to the surface as well as their mobility were estimated. It was found that at higher densities, the n-butyl chains are predominantly perpendicular to the surface while at low density they are highly tilted or lying almost parallel to the surface. The degree of ligand flexibility decreased with increasing surface density. Mobility of individual carbon atoms as well as chain disorder increased with distance from the surface for all ligand densities. The simulated properties of n-butyl chains immobilised to a silica surface correlated well with results obtained by Fourier transform IR and ¹³C-cross polarisation magic angle spinning NMR experimental methods and statistical predictions of the behaviour of immobilised chains.     

2,4,6—三氧—1,3,5,2—三氮磷杂环己烷衍生物的合成及其抗肿瘤活性

利用Ｎ，Ｎ－二（２－氯乙基）氨基磷酰二异氰酸酯和胺的加成反应，合成了２，４，６三氧－１，３，５，２三氮磷杂环己烷衍生物，它们的结构经＾１ＨＮＭＲ，ＩＲ和元素分析所证实。初步生物活性测试结果表明，部分化合物具有一定的抗肿瘤活性。     

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.     

N-（4＇-取代嘧啶-2＇-基）-取代苯氧基磺酰脲的合成及除草活性

光谱;N-（4＇-取代嘧啶-2＇-基）-取代苯氧基磺酰脲的合成及除草活性     

Prediction of retention times of proteins in hydrophobic interaction chromatography using only their amino acid composition

This paper focuses on the prediction of the dimensionless retention time of proteins (DRT) in hydrophobic interaction chromatography (HIC) by means of mathematical models based, essentially, only on aminoacidic composition. The results show that such prediction is indeed possible. Our main contribution was the design of models that predict the DRT using the minimal information concerning a protein: its aminoacidic composition. The performance is similar to that observed in models that use much more sophisticated information such as the three-dimensional structure of proteins. Three models that, in addition to the amino acid composition, use different assumptions about the amino acids tendency to be exposed to the solvent, were evaluated in 12 proteins with known experimental DRT. In all the cases analyzed, the model that obtained the best results was the one based on a linear estimation of the aminoacidic surface composition. The models were adjusted using a collection of 74 vectors of aminoacidic properties plus a set of 6388 vectors derived from these using two mathematical tools: k-means and self-organizing maps (SOM) algorithms. The best vector was generated by the SOM algorithm and was interpreted as a hydrophobicity scale based partly on the tendency of the amino acids to be hidden in proteins. The prediction error (MSE(JK)) obtained by this model was almost 35% smaller than that obtained by the model that supposes that all the amino acids are completely exposed and 40% smaller than that obtained by the model that uses a simple correction factor considering the general tendency of each amino acid to be exposed to the solvent. In fact, the performance of the best model based on the aminoacidic composition was 5% better than that observed in the model based on the three-dimensional structure of proteins.     

Cycloaddition reactions of alkoxy alkynyl Fischer carbene complexes with o-quinodimethanes (oQDMs)

[reaction: see text] The reaction of o-quinodimethanes (oQDMs) with alkoxy alkynyl Fischer carbene complexes is highly dependent on the carbene complex. Thus, for arylalkynyl carbene complexes, the initial [4 + 2]-cycloadduct evolves opening a new entry to the benzo[b]fluorene skeleton, which is present in many natural products. However, for alkenylalkynyl carbene complexes, the reaction takes place through the double bond, instead of the triple bond, in an unprecedented fashion, leading to new functionalized alkynyl carbene complexes.