High-power 2.8 W blue-violet laser diode for white light sources

High-power 2.8 W blue-violet InGaN LD was fabricated, applying AlN facet coating technology. The AlN was found to be crystallized on the facets and very stable even after 2200 h cw operation. Luminous flux over 380 lm is obtained with a phosphor-converted LD excitation white light source using just a single laser chip at 1A operating current.     

Persistent luminescence properties of SrMg2(PO4)2:Eu2+,Tb3+

We investigate the persistent luminescence in europium-doped SrMg₂(PO₄)₂ upon codoping with auxiliary terbium. Luminescence properties of the phosphors, including photoluminescence, luminescence decay and thermoluminescence, are systematically studied. SrMg₂(PO₄)₂:Eu²⁺ shows only a weak persistent luminescence, and codoping with Tb³⁺ is necessary to obtain considerable persistent luminescence. An energy level scheme is constructed to convey reasonable trapping and detrapping processes in the material.     

Design and fabrication of single-crystal GaN nano-bridge on homogeneous substrate for nanoindentation

This study reports a simple method to design and fabricate a freestanding GaN nano-bridge over a homogeneous short column as supporting leg. Test samples were fabricated from MOCVD-grown single-crystal GaN films over sapphire substrate using a FIB milling to leave freestanding short spans. We also investigated the nanoindentation characteristics and the corresponding nanoscopic mechanism of the GaN nano-bridge and its short column with a conical indenter inside transmission electron microscopy. The stress–strain mechanical properties and Young’s modulus have also been examined and calculated as 108 GPa ± 4.8 % by the strain energy method. The significant slope switch of the L–D curve corresponds to the transition from the single-point bending indentation to the surface stretching indentation and has been interpreted with the evolution of TEM images. This freestanding fabrication and test have key advantages to characterize nanoscale behavior of one-dimensional bridge structure and greater ease of sample preparation over other micro-fabrication techniques.     

Automated capillary electrophoresis with on-line preconcentration by solid phase extraction using a sequential injection manifold and contactless conductivity detection

An extension of a capillary electrophoresis instrument coupled to a sequential injection analysis manifold was developed for automated measurements with on-line solid-phase extraction preconcentration. An in-house built capacitively coupled contactless conductivity detector was employed for sensitive detection with narrow capillaries of 25 μm internal diameter. The system was assembled into standardized 19 in. frames and racks for easy transport and mobile deployment. The system can be left running unattendedly without manual intervention with good operation stability. To demonstrate the application of the system, a method for the determination of four drugs, namely ibuprofen, diclofenac, naproxen and bezafibrate, was developed with enrichment factors of up to several hundreds. Detection of the drug residues down to the nM-scale was found possible and the method was found suitable for the detection of ibuprofen in the waste water of a hospital in Hanoi.     

Chemical and physical characteristics of self-fabricated radiophotoluminescent glass dosimeter

Thermoluminescent dosimeters are widely applied in the measurement of radiation dose. Since the luminescent centers are not lost during the reading process, radiophotoluminescent glass dosimeters (RPLGDs) can be repeatedly readout. The aims of this study were to make RPLGD and to analyze its physical and chemical properties. This study used chemical compounds such as Na₃PO₄, AlPO₄, AgCl, AgNO₃, B₂O₃, H₃PO₄ and P₂O₅ as the main ingredients. Depending on the self-fabricated glass compounds, the melting temperatures were between 1100 and 1500 °C. When the 0.1 mol% of silver was added, the radiation detection of self-fabricated RPLGD reached to the highest sensitivity. However, when silver concentration was larger than 0.1 mol%, the radiation detection sensitivity plummets rapidly. Excess amounts of silver and aluminum decreased the penetrate capability of ultraviolet spectrum. Based on our study, we found that chemical compound concentrations and melting process, which all affect radiation sensitivity and stability of self-fabricated RPLGD.     

Solvent-Polymer Interaction. II. Measurements of Liquid Solvent Molecules Associating with Polymer Sites and of Their Transport Behavior in Polymer Membrane by Thermogravimetry,GLC, and Mass Spectrometry

The measurement of sorption and diffusion behavior of liquid ethanol and water solvent mixtures in polyurethane membrane were made simultaneously by thermogravimetry. The individual amounts of sorbed water and ethanol in the polymer membrane were estimated by thermogravimetry and differentiated by mass spectrometry. In addition, from a single dynamic thermogravimetric experiment the activation energy for solvent molecules desorbing from the polymer membrane was also determined. The thermodynamic activity of ethanol vapor in equilibrium with the ethanol-water-polyurethane system was determined by gas-liquid chromatography. The clustering functions, the mean numbers of solvent molecules in the clusters, and those associating with polymer sites were evaluated by applying simplified mathematical derivatives using the experimentally determined values of activity and volume fraction of solvent molecules. It was found that at lower ethanol concentration the tendency for ethanol molecules to cluster together is high. At higher ethanol activity, ethanol-polymer site interactions predominantly occurred.

Similar results were observed for ethanol-water molecules. However, water molecules in this particular system did not exhibit a self-associating tendency nor interact with the polymer sites. It was concluded that the Zimm-Lundberg clustering theory can be adequately applied to the interpretation of sorption and diffusion behavior of liquid ethanol-water mixtures in the polymer membrane.     

Photophysics of Silicon Phthalocyanines in Aqueous Media

Phthalocyanines have been used as photodynamic therapy (PDT) agents because of their uniquely favorable optical properties and high photostability. They have been shown to be highly successful for the treatment of cancer through efficient singlet‐oxygen (¹O₂) production. However, due to their hydrophobic properties, the considerations of solubility and cellular location have made understanding their photophysics in vitro and in vivo difficult. Indeed, many quantitative assessments of PDT reagents are undertaken in purely organic solvents, presenting challenges for interpreting observations during practical application in vivo. With steady‐state and time‐resolved laser spectroscopy, we show that for axial ligated silicon phthalocyanines in aqueous media, both the water:lipophile ratio and the pH have drastic effects on their photophysics, and ultimately dictate their functionality as PDT drugs. We suggest that considering the presented photophysics for PDT drugs in aqueous solutions leads to guidelines for a next generation of even more potent PDT agents.