Solid supports for micro analytical systems

The development of micro analytical systems requires that fluids are able to interact with the surface of the microfluidic chip in order to perform analysis such as chromatography, solid phase extraction, and enzymatic digestion. These types of analyses are more efficient if there are solid supports within the microfluidic channels. In addition, solid supports within microfluidic chips are useful in producing devices with multiple functionalities. In recent years there have been many approaches introduced for incorporating solid supports within chips. This review will explore several state of the art methods and applications of introducing solid supports into chips. These include packing chips with beads, incorporating membranes into chips, creating supports using microfabrication, and fabricating gels and polymer monoliths within microfluidic channels.     

A Tensile Strain Hardening Test Indicator of Environmental Stress Cracking Resistance

Environmental stress cracking resistance (ESCR) is an important indicator of performance for high density polyethylene (HDPE) in structural and polymer pipe applications. The commonly used test for determining ESCR of HDPE can be time consuming and rather imprecise. A tensile strain hardening test was recently proposed to offer a faster way to characterize ESCR of polyethylene. In this paper, a practical approach is adopted whereby the test is extended to room temperature and shown to relate reliably to the ESCR of HDPE. Several HDPE resins (including pipe‐grade resins) are analyzed at strain rates of 0.5 mm/min and 7 mm/min to compare the effect of strain rate. Comparisons between the conventional ESCR test method and the strain hardening test show that strain hardening can be used to rank ESCR of HDPE in a reliable fashion. In our study the more direct measure of “hardening stiffness” is used to compare resins instead of strain hardening modulus. Because no true stress‐strain measurement is needed, this is a much simpler test method than other methods previously suggested. In addition, the use of the natural drawing ratio (NDR) as ESCR ranking indicator is examined. Results show that NDR can also be employed as a strain rate‐independent indicator of ESCR of HDPE. The test proposed herein is practical, simple and precise, and hence a more reliable indicator of ESCR performance of HDPE.     

Oxidative Rearrangement of Substituted Arylalkyl Ketones with Thallium (III) Nitrate: Synthesis of 2,7-Dihydroxycadalene

Synthesis of methyl 2-(3′-methoxy-4′-methylphenyl)-propionate via the T1(NO₃)₃-induced oxidative rearrangement of 3′-methoxy-4′-methylpropiophenone.     

Preparation of 3-azetidinols with non-bulky 1-alkyl substituents

Cyclization of either the tetrahydropyranyl or trimethylsilyl ether of 1-(alkylamino)-3-chloro-2-propanols 1 followed by cleavage of the azetidinyl ether provides a general method for the preparation of 1-alkyl-3-azetidinols. Unhindered amines provide a more facile preparation of derivatives of 1 , or its ethers, than do hindered amines, while hindered derivatives of 1 undergo more facile ring closure.     

High-performance liquid chromatographic determination of 4,4'-methylenedianiline in human urine

A method is described for the determination of urinary 4,4'-methylenedianiline (MDA) by high-performance liquid chromatography (HPLC). MDA was extracted from hydrolyzed urine using C18 solid-phase extraction columns. The extract was analyzed by reversed-phase HPLC with electrochemical detection at a cell potential of 0.8 V. The method was very sensitive (detection limit 2.5 micrograms/l) and quantitation using 4,4'-ethylenedianiline as an internal standard correlated well with results by gas chromatography-mas spectrometry. Run-to-run precision (n = 25) averaged 8.9%. In analysis of more than 160 potentially exposed workers, MDA was detected in less than 20% of the urines and concentrations ranged up to 210 micrograms MDA per g of creatinine.     

Mannose‐based graft polyesters with tunable binding affinity to concanavalin A

Glycopolymers have been widely used to understand the interactions between carbohydrates and lectins, which facilitate the diagnosis and detection of disease and pathogens as well as the development of vaccines. While studies have been focused on the correlation of glycopolymer structure and their binding to lectins, graft‐type glycopolyesters are uncommon. Herein, we report the design and synthesis of mannose‐based graft polyesters by “grafting‐from” method and investigate their interactions with Concanavalin A (Con A). As confirmed by ¹H NMR spectroscopy and sulfuric acid‐UV method, graft polyesters with different lengths of mannose graft were successfully synthesized. Our results from turbidimetry binding assay showed that graft polyesters with longer mannose graft exhibit higher initial binding rate (k_i). Isothermal titration calorimetry measurements of these graft polyesters with Con A showed that polymers exhibit higher binding affinity (k_a) with the number of side chain mannose. This study provides understanding of the interaction between Con A and mannose‐based graft polyesters, which can be employed for the development of glycopolymeric therapeutics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3908–3917     

An efficient microwave assisted synthesis of N′-aryl/(alkyl)-substituted N-(4-hydroxy-6-phenylpyrimidin-2-yl)guanidines: Scope and limitations

Treatment of N-[(4-hydroxy-6-phenyl)pyrimidin-2-yl]cyanamide with 1° alkyl or arylamines in isopropyl alcohol for only 10 min at 110–120 °C under microwave conditions gave the corresponding N′-alkyl(aryl)guanidine derivatives in excellent yields (65–84%). Isolated yields were greatest when >1.0 equiv. of amines were employed, but excellent results were also obtained when aryl and alkylamines were reacted with a more atom-economical loading (1.0 equiv.; 70% and 72% ave. yields, respectively). Arylamines with either highly electron withdrawing substituents (e.g. CO₂H) or pi-deficient heterocycles (e.g. variously substituted aminopyridines) did not work well under these conditions, and reaction with ureas and/or amino acids did not give detectable products. Work-up was exceedingly simple, and involved simple collection and washing of product on a sintered glass funnel. Products were obtained in analytically pure form and required approximately 1 h to prepare, start to finish.