Mannose‐based graft polyesters with tunable binding affinity to concanavalin A

Glycopolymers have been widely used to understand the interactions between carbohydrates and lectins, which facilitate the diagnosis and detection of disease and pathogens as well as the development of vaccines. While studies have been focused on the correlation of glycopolymer structure and their binding to lectins, graft‐type glycopolyesters are uncommon. Herein, we report the design and synthesis of mannose‐based graft polyesters by “grafting‐from” method and investigate their interactions with Concanavalin A (Con A). As confirmed by ¹H NMR spectroscopy and sulfuric acid‐UV method, graft polyesters with different lengths of mannose graft were successfully synthesized. Our results from turbidimetry binding assay showed that graft polyesters with longer mannose graft exhibit higher initial binding rate (k_i). Isothermal titration calorimetry measurements of these graft polyesters with Con A showed that polymers exhibit higher binding affinity (k_a) with the number of side chain mannose. This study provides understanding of the interaction between Con A and mannose‐based graft polyesters, which can be employed for the development of glycopolymeric therapeutics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3908–3917     

A Tensile Strain Hardening Test Indicator of Environmental Stress Cracking Resistance

Environmental stress cracking resistance (ESCR) is an important indicator of performance for high density polyethylene (HDPE) in structural and polymer pipe applications. The commonly used test for determining ESCR of HDPE can be time consuming and rather imprecise. A tensile strain hardening test was recently proposed to offer a faster way to characterize ESCR of polyethylene. In this paper, a practical approach is adopted whereby the test is extended to room temperature and shown to relate reliably to the ESCR of HDPE. Several HDPE resins (including pipe‐grade resins) are analyzed at strain rates of 0.5 mm/min and 7 mm/min to compare the effect of strain rate. Comparisons between the conventional ESCR test method and the strain hardening test show that strain hardening can be used to rank ESCR of HDPE in a reliable fashion. In our study the more direct measure of “hardening stiffness” is used to compare resins instead of strain hardening modulus. Because no true stress‐strain measurement is needed, this is a much simpler test method than other methods previously suggested. In addition, the use of the natural drawing ratio (NDR) as ESCR ranking indicator is examined. Results show that NDR can also be employed as a strain rate‐independent indicator of ESCR of HDPE. The test proposed herein is practical, simple and precise, and hence a more reliable indicator of ESCR performance of HDPE.     

Ruthenium(IV) pyrochlore oxides: Realization of novel electronic properties through substitution at A- and B-sites

We describe an exploratory investigation of the structure and electronic properties of new ruthenium(IV) pyrochlore oxides and their manganese-substituted derivatives. Our investigations have revealed several, hitherto unreported, electronic ground states for these materials: a metallic and Pauli paramagnetic state for BiPbRu₂O_6.5 that turns into a semiconducting ferromagnetic spin-glass state at 50 K for BiPbRuMnO_6.5; a metallic state that likely shows a charge density wave (CDW) instability at 50–225 K for Bi_1.50Zn_0.50Ru₂O_6.75 that is suppressed by manganese substitution in Bi_1.50Zn_0.50Ru_1.75Mn_0.25O_6.50; and a metallic ferromagnetic spin-glass like state for Pb₂Ru_1.75Mn_0.25O_6.15. The results indeed affirm the richness of the electronic properties of ruthenium-based metal oxides.     

Three‐dimensional imaging of chemical phase transformations at the nanoscale with full‐field transmission X‐ray microscopy

The ability to probe morphology and phase distribution in complex systems at multiple length scales unravels the interplay of nano‐ and micrometer‐scale factors at the origin of macroscopic behavior. While different electron‐ and X‐ray‐based imaging techniques can be combined with spectroscopy at high resolutions, owing to experimental time limitations the resulting fields of view are too small to be representative of a composite sample. Here a new X‐ray imaging set‐up is proposed, combining full‐field transmission X‐ray microscopy (TXM) with X‐ray absorption near‐edge structure (XANES) spectroscopy to follow two‐dimensional and three‐dimensional morphological and chemical changes in large volumes at high resolution (tens of nanometers). TXM XANES imaging offers chemical speciation at the nanoscale in thick samples (>20 µm) with minimal preparation requirements. Further, its high throughput allows the analysis of large areas (up to millimeters) in minutes to a few hours. Proof of concept is provided using battery electrodes, although its versatility will lead to impact in a number of diverse research fields.     

The Design of 3D-Printed Polylactic Acid–Bioglass Composite Scaffold: A Potential Implant Material for Bone Tissue Engineering

Bio-based and patient-specific three-dimensional (3D) scaffolds can present next generation strategies for bone tissue engineering (BTE) to treat critical bone size defects. In the present study, a composite filament of poly lactic acid (PLA) and 45S5 bioglass (BG) were used to 3D print scaffolds intended for bone tissue regeneration. The thermally induced phase separation (TIPS) technique was used to produce composite spheres that were extruded into a continuous filament to 3D print a variety of composite scaffolds. These scaffolds were analyzed for their macro- and microstructures, mechanical properties, in vitro cytotoxicity and in vivo biocompatibility. The results show that the BG particles were homogeneously distributed within the PLA matrix and contributed to an 80% increase in the mechanical strength of the scaffolds. The in vitro cytotoxicity analysis of PLA-BG scaffolds using L929 mouse fibroblast cells confirmed their biocompatibility. During the in vivo studies, the population of the cells showed an elevated level of macrophages and active fibroblasts that are involved in collagen extracellular matrix synthesis. This study demonstrates successful processing of PLA-BG 3D-printed composite scaffolds and their potential as an implant material with a tunable pore structure and mechanical properties for regenerative bone tissue engineering.     

Identification of tyrosine nitration in UCH-L1 and GAPDH

Protein tyrosine nitration is a post-translational modification commonly used as a marker of cellular oxidative stress associated with numerous pathophysiological conditions. We focused on ubiquitin carboxyl terminal hydrolase-L1 (UCH-L1) and glyceraldehyde-3-phosphate (GAPDH) which are high-abundant brain proteins that have been identified to be highly susceptible to oxidative modification. Both UCH-L1 and GAPDH have been linked to the pathogenesis of Alzheimer's and Parkinson's disease, however specific nitration sites have not been elucidated. Identification of specific nitration sites and quantitation of endogenous nitrated proteins are important in correlating this modification to disease pathology. In this study, purified UCH-L1 and GAPDH were nitrated in vitro with peroxynitrite and the presence of nitrated proteins was confirmed by anti-3-nitrotyrosine Western blots. Data-dependent LC-MS/MS analysis identified several distinct tyrosine nitration sites in UCH-L1 (Tyr-80) and GAPDH (Tyr-47, Tyr-92, and Tyr-312). Subsequent validation with synthetic peptides was conducted for selected nitropeptides. An LC-MS/MS method was developed for semi-quantitative determination of the synthetic nitropeptides: KGQEVSPKVY(*) (UCH-L1) and mFQY(*) DSTHGKF (GAPDH). The nitropeptides were detectable in the mid-attomole range and the peak area response was linear over three orders of magnitude. Targeted analysis of endogenous UCH-L1 and GAPDH nitration was then conducted in an in vivo second-hand smoke rat model to evaluate the utility of this approach.     

Reactions of [HOs3(CO)8{µ3-Ph2PCH(R)P(Ph)C6H4}] (R = H,Me) with Bu3SnH: synthesis and structure of bimetallic Os-Sn clusters

Reactions of unsaturated [HOs₃(CO)₈{µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (R?=?H, Me) with Bu₃SnH are examined. [HOs₃(CO)₈{µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] reacts with Bu₃SnH at room temperature to afford [H₂Os₃(CO)₈(SnBu₃){µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (1) via oxidative addition of the Sn?H bond to the parent cluster. Heating 1 in refluxing toluene leads to the formation of [H₂Os₃(CO)₇(SnBu₃){µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (2) through decarbonylation. Cluster 2 exists in two isomeric forms in solution which has been probed by VT NMR spectroscopy. The new Os-Sn bimetallic clusters have been characterized by a combination of analytical and spectroscopic data together with single-crystal X-ray diffraction analysis.

Graphic abstract

     

Insight into the nonlinear absorbance of two related series of two-photon absorbing chromophores

A comprehensive photophysical study of the linear and nonlinear absorption properties has been carried out on two series of two-photon absorbing dyes to gain insight into how structure-property relationships influence observed nonlinear absorption. The materials studied consist of an electron accepting benzothiazole group connected to an electron donating diphenylamine via a fluorene bridging group. Two series differ from each other by the addition of one phenyl group and for each series one-arm (dipolar, AF240 and AF270), two-arm (quadrupolar, AF287 and AF295), and three-arm (octupolar, AF350 and AF380) versions were studied. Overall the AF240 series exhibits higher intrinsic two-photon absorption (TPA) cross-sections than the AF270 series as well as enhanced nanosecond nonlinear absorption, with an increase with number of branches. The enhanced nanosecond nonlinearity is understood by taking into account the contribution from the singlet and triplet excited states and was verified by a two-photon assisted excited-state absorption model that satisfactorily predicts the nonlinear absorption of the chromophores.     

Enzymatic hydrolysis of ammonia-treated sugar beet pulp

Sugar beet pulp is a carbohydrate-rich coproduct generated by the table sugar industry. Beet pulp has shown promise as a feedstock for ethanol production using enzymesto hydroly zepolymeric carbohydrates and engineered bacteria to ferment sugars to ethanol. In this study, sugar beet pulp underwent an ammonia pressurization depressurization (APD) pretreatment in which the pulp was exploded by the sudden evaporation of ammonia in a reactor vessel. APD was found to substantially increase hydrolysis efficiency of the cellulose component, but when hemicellulose- and pectindegrading enzymes wereadded, treated pulp hydrolysis was no better than the untreated control.