The stereochemistry of fragmentation products formed in the lead tetraacetate and related oxidations of alcohols. Part. I. β-fragmentation of cis-and trans-4-t-Butylcyclohexanemethanol

The stereochemistry of β-fragmentation products formed in the oxidation of cis-and trans-4-t-butylcyclohexaanemethanol with lead tetraacetate and with lead tetraacetate-metal chloride combinations, under various reaction conditions, has been investigated, and the results compared with those obtained, under similar conditions, in the oxidative decarboxylation of cis-and trans-4-t-butylcyclohexanecarboxylic acid with the same reagents. It was found that all four substrates afford, under comparable conditions, identical cis-trans proportions of the respective fragmentation products, and that, therefore, so far as steric course is concerned, both the initial homolytic and subsequent heterolytic processes involved in the lead tetraacetate fragmentation reaction are independent of the nature and configuration of the starting material.     

In situ radical polymerization of methyl methacrylate in a solution of surface modified TiO2 and nanoparticles

Surface modified TiO₂ nanoparticles dissolved in toluene were encapsulated in PMMA by in situ radical polymerization of methyl methacrylate initiated by 2,2′-azobisisobutyronitrile. The surface modification of the TiO₂ nanoparticles (average diameter of 4.5 nm) was achieved by the formation of a charge transfer complex between TiO₂ nanoparticles and 6-palmitate ascorbic acid. The surface modified TiO₂/nanoparticles were characterized using UV−Vis and FTIR spectroscopy, while the obtained polymer nanocomposites were characterized using reflection and ¹H NMR spectroscopy, as well as gel permeation chromatography. The influence of the TiO₂ nanoparticles on the thermal properties of the PMMA matrix was investigated using thermo-gravimetric analysis and differential scanning calorimetry. The glass transition temperature of the polymer was not influenced by the presence of the nanoparticles while the thermal stability was significantly improved.     

Radiolytic synthesis and characterization of Ag-PVA nanocomposites

The Ag-PVA nanocomposites with different contents of inorganic phase were prepared by reduction of Ag⁺ ions in aqueous PVA solution by gamma irradiation followed by solvent evaporation. Optical properties of the colloidal solutions and the nanocomposite films were investigated using UV-vis spectroscopy. Structural characterization of the Ag nanoparticles was performed by TEM and XRD. Interaction of the Ag nanoparticles with polymer matrix and the heat resistance of the nanocomposites were followed by IR spectroscopy and DSC analysis. IR spectra indicated that Ag nanofiller interact with PVA chain over OH groups. The changes of heat resistance upon the increase of the content of inorganic phase are correlated to the adsorption of polymer chains on the surface of Ag nanoparticles.     

Self-assembly of supramolecular light-harvesting arrays from covalent multi-chromophore perylene-3,4:9,10-bis(dicarboximide) building blocks

We report on two multi-chromophore building blocks that self-assemble in solution and on surfaces into supramolecular light-harvesting arrays. Each building block is based on perylene-3,4:9,10-bis(dicarboximide) (PDI) chromophores. In one building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 3 and 6 carbons of pyromellitimide to form a cross-shaped molecule (PI-PDI(4)). In the second building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 1 and 7 carbons of a fifth PDI to produce a saddle-shaped molecule (PDI(5)). These molecules self-assemble into partially ordered dimeric structures (PI-PDI(4))(2) and (PDI(5))(2) in toluene and 2-methyltetrahydrofuran solutions with the PDI molecules approximately parallel to one another primarily due to pi-pi interactions between adjacent PDI chromophores. On hydrophobic surfaces, PDI(5) grows into rod-shaped nanostructures of average length 130 nm as revealed by atomic force microscopy. Photoexcitation of these supramolecular dimers in solution gives direct evidence of strong pi-pi interactions between the excited PDI chromophore and other PDI molecules nearby based on the observed formation of an excimer-like state in <130 fs with a lifetime of about 20 ns. Multiple photoexcitations of the supramolecular dimers lead to fast singlet-singlet annihilation of the excimer-like state, which occurs with exciton hopping times of about 5 ps, which are comparable to those observed in photosynthetic light-harvesting proteins from green plants.     

Imaging mass spectrometry using peptide isoelectric focusing

Imaging Mass Spectrometry (IMS) has emerged as a powerful technique in the field of proteomics. The use of Immobilized pH Gradient-IsoElectric Focusing (IPG-IEF) is also a new trend, as the first dimension of separation, in shotgun proteomics. We report a combination of these two outstanding technologies. This approach is based on the separation of shotgun-produced peptides by IPG-IEF. The peptides are then transferred by capillarity to a capture membrane, which is then scanned by the mass spectrometer to generate MS images. This high-throughput methodology allows a preview of the sample to be obtained in a single day. We report the application of this new pipeline for differential comparison of the membrane proteome of two different strains of Staphylococcus aureus bacteria in a proof-of-principle experiment.     

An ab initio investigation on (CO2)n and CO2(Ar)m clusters: geometries and IR spectra

An ab initio investigation on CO(2) homoclusters is done at MPWB1K6-31++G(2d) level of theory. Electrostatic guidelines are found to be useful for generating initial structures of (CO(2))(n) clusters. The ab initio minimum energy geometries of (CO(2))(n) with n=2-8 are T shaped, cyclic, trigonal pyramidal, tetragonal pyramidal, tetragonal bipyramidal, pentagonal bipyramidal, and pentagonal bipyramid with one CO(2) molecule attached to it. A test calculation on (CO(2))(20) cluster is also reported. The geometric parameters of the energetically most favored (CO(2))(n) clusters match quite well their experimental counterparts (wherever available) as well as those derived from molecular dynamics studies. The effect of clustering is quantified through the asymmetric C-O stretching frequency shift relative to the single CO(2) molecule. (CO(2))(n) clusters show an increasing blueshift from 1.8 to 9.6 cm(-1) on increasing number of CO(2) molecules from n=2 to 8. The energetics and geometries of CO(2)(Ar)(m) clusters have also been explored at the same level of theory. The geometries for m=1-6 show a predominant T type of the argon-CO(2) molecule interaction. Higher clusters with m=7-12 show that the argon atoms cluster around the oxygen atom after the saturation of the central carbon atom. The CO(2)(Ar)(m) clusters exhibit an increasing redshift in the C-O asymmetric stretch relative to CO(2) molecule of 0.7-5.6 cm(-1) with increasing number of argon atoms through m=1-8.     

Dimension Engineering of Stimuli-Responsive 1D Molecular Crystals into Unusual 2D and 3D Zigzag Waveguides

We demonstrate an innovative technique to achieve organic 2D and 3D waveguides with peculiar shapes from an acicular, stimuli-responsive molecular crystal, (2Z,2′Z)-3,3′-(anthracene-9,10-diyl)bis(2-(3,5-bis(trifluoromethyl)phenylacrylonitrile), Ant-CF₃. The greenish-yellow fluorescent (FL) Ant-CF₃ molecular crystals exhibit laser power-dependent permanent mechanical bending in 2D and 3D. Investigation of a single-crystal using spatially-resolved Raman/FL/electron microscopy, and theoretical calculations revealed photothermal (Z,E)/(E,E) isomerization-assisted transition from crystalline to amorphous phase at the laser-exposed regions. This phenomenon facilitates the dimension engineering of a 1D crystal waveguide into 2D waveguide on a substrate or a 3D waveguide in free space. The bends can be used as interconnection points to couple different optical elements. The presented technique has broader implications in organic photonics and other crystal-related photonic technologies.     

Doppler effect's contribution to ultrasonic modulation of multiply scattered coherent light: Monte Carlo modeling

Modulation of light by ultrasound in turbid media is investigated by modified public domain software based on the Monte Carlo algorithm. Apart from the recognized modulation mechanisms, originating in scatterers' displacements and refractive index modulation, an additional mechanism, evolving from Doppler shift during photon scattering, is considered. Comparison of the relative contributions from all three mechanisms to light modulation by ultrasound is performed for different medium scattering properties and ultrasound frequencies. Refractive index modulation remains the strongest mechanism for light modulation by ultrasound, but for high ultrasound frequencies and for large scattering coefficients the Doppler effect can become dominant.     

The Stochastic Approach in Analysis—the Structures with Vacancies and Impurities

The stochastic approach to the problem of deformed bulk structures is a unique possibility for obtaining a so–so real picture of physical processes in these structures. The chain of identical atoms with random distances between neighbours as well as the chain with random masses at equal distances is analysed. These analyses were generalized to complex chains, which are spatially and mass deformed. The approximations used were incommensurability; one and more rough, continual approximation. The probabilities are of exponential type. It means that the error in estimation on the basis of stochastical method can go to 100% maximally.     

Impedance spectroscopy of reactive polymers. 5. Impedance as a measure of chemical and physical changes in glass formers

A study was conducted aimed at establishing the nature of chemical and physical phenomena in polymeric and nonpolymeric glass formers that can be observed by impedance measurements. Various systems were investigated that undergo a temporal evolution of structure as a result of chemical reactions and physical processes such as crystallization, vitrification, or phase separation. Distinct and systematic changes in impedance during crystallization and vitrification confirmed that these events could be monitored by impedance spectroscopy. Of particular interest was the potential use of impedance measurements in detecting gelation in crosslinking polymers. It was shown that the experimentally observed “knee” in imaginary impedance during reaction shifts with frequency and, hence, cannot be used to measure gelation. But a new insight at the molecular level was obtained by employing a novel experimental approach based on simultaneous dielectric-infrared measurements. Evidence was generated to support the formation of a hydrogen-bonded complex in the vicinity of gel point in polymer networks, which affords a vehicle for the migration of intrinsic charges and provides a contribution to the overall conductivity. This finding should be explored further because it suggests the possibility of correlating dielectric response with gelation. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 641–653, 1998