Locating a metro line in a historical city centre: application to Sevilla

When constructing a metro alignment under a historical city centre, it is important to generate a cost-effective path while maintaining a minimum distance between the alignment and historical buildings. This paper describes a simple methodology for generating a set of good alternative solutions. It is based on the use of Voronoi diagrams. The method was applied to data from the city of Sevilla.     

Self-assembled tin-doped ZnO nanowire and nanoplate structures grown by thermal treatment of ZnS powder

Sintering of a ZnS–SnO₂ mixture under argon flow leads to the growth of columnar nanoplate arrays as well as arrays of nanowires, nanorods and nanoplates with six-fold symmetry. The six-fold nanoplate structures correspond to a more advanced stage of growth than the nanowire structures. Cathodoluminescence (CL) in the scanning electron microscope (SEM) shows that the structures contain Sn, but the amount of this element is normally under the detection limit of X-ray energy-dispersive spectroscopy (EDS). The formation of branches in the hierarchical structures depends on the presence of Sn and on defects in the mixture powder.     

Viscosity of n-alkyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide ionic liquids saturated with compressed CO2

The viscosity of imidazolium-based ionic liquids (ILs) saturated with gaseous, liquid and supercritical carbon dioxide (CO₂) was measured by a high-pressure viscometer at three different temperatures (25, 50, and 70 °C). The high-pressure viscosity of 1-ethyl-3-methylimidazolium ([EMIm]), 1-n-hexyl-3-methylimidazolium ([HMIm]), and 1-n-decyl-3-methylimidazolium ([DMIm]) cations with a common anion, bis(trifluoromethylsulfonyl)amide ([Tf₂N]), saturated with CO₂ was measured up to a maximum of 287 bar. As CO₂ pressure is increased the viscosity of the IL mixture dramatically decreases. While, the ambient pressure viscosity of 1-alkyl-3-methyl-imidazolium [Tf₂N] ILs increases significantly with increasing chain length, the viscosity of all the CO₂-saturated ILs becomes very similar at high CO₂ pressures. From previous vapor–liquid equilibrium data, the viscosity with concentration was determined and found to be the primary factor to describe the fractional viscosity reduction. Several predictive and correlative methods were investigated for the mixture viscosity given pure component properties and include arithmetic mixing rules, the Irving (Predictive Arrhenius) model, Grunberg equation, etc. The modified Grunberg model with one adjustable parameter provided an adequate fit to the data.     

Quantitative analysis of boldine alkaloid in natural extracts by cyclic voltammetry at a liquid-liquid interface and validation of the method by comparison with high performance liquid chromatography

The quantitative determination of boldine alkaloid in boldo leaf extracts by employing cyclic voltammetry, at a liquid/liquid interface as well as the validation of this methodology against the reference method, high performance liquid chromatography (HPLC), are reported in the present paper. The voltammetric analysis was performed successfully and economically using two kinds of liquid/liquid interfaces: water/1,2-dicholoroethane and water/PVC (polyvinyl chloride)-gelled 1,2-dichloroethane. Linear calibration curves in the concentration range of 1.04 × 10⁻⁵ mol L⁻¹ to 5.19 × 10⁻⁴ mol L⁻¹ were obtained with a detection limit equal to (6.1 ± 0.7) × 10⁻⁵ mol L⁻¹ and the quantitative determination of this alkaloid, in complex matrixes such as boldo leaf extracts, by the electrochemical technique proposed was found to be equal to the values obtained using the standard HPLC method. The validation analysis of this methodology against HPLC demonstrated that accuracy, linearity, limit of detection (LOD), limit of quantification (LOQ), specificity and precision are acceptable. The electroanalytical technique proposed is economical and selective, involves simple equipment and can be applied for the quantitative determination of boldine alkaloid in complex matrixes such as leaf extracts without special drug separation. Moreover, cyclic voltammetry (CV) experiments applied at the liquid/liquid interface under different experimental conditions allowed us to study the transfer mechanism of boldine, and determine a value of pK_a^w = 6.90 for protonated boldine, from the variation of voltammetric peak current with pH.     

Quantification of Quercetin Using Glassy Carbon Electrodes Modified with Multiwalled Carbon Nanotubes Dispersed in Polyethylenimine and Polyacrylic Acid

This work reports the highly sensitive detection of quercetin using glassy carbon electrodes modified with multiwall carbon nanotubes (MWCNT) dispersed in polyethylenimine and poly(acrylic acid). The adsorptive stripping with square wave voltammetric transduction allowed the detection of 7.5 nM quercetin after 1.0 min accumulation at open circuit potential. The amperometric detection at 0.150 V is reported as an easier and simpler alternative to determine quercetin, with detection limits of 0.2 µM. The careful selection of the working conditions also made possible the detection of submicromolar levels of quercetin in the presence of excess of rutin. The proposed methodology was successfully used to quantify quercetin in onion samples.     

The kinetics of solid‐state reactions toward consensus—Part I: Uncertainties,failures, and successes of conventional methods

An account of conventional dynamic thermal analysis (TA) with respect to uncertainties, failures, successes, and limitations as applied to solid‐state (s‐s) processes is discussed. A review of some controversial aspects of TA is presented. The scope is to discuss in three parts the adequate understanding of TA and to open a controversy about the dynamic methods and about the necessity of stimulating a consensus between scientists for a better TA. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 343–353, 2001     

GPU computing for shallow water flow simulation based on finite volume schemes

This article is a review of the work that we are carrying out to efficiently simulate shallow water flows. In this paper, we focus on the efficient implementation of path-conservative Roe type high-order finite volume schemes to simulate shallow flows that are supposed to be governed by the one-layer or two-layer shallow water systems, formulated under the form of a conservation law with source terms. The implementation of the scheme is carried out on Graphics Processing Units (GPUs), thus achieving a substantial improvement of the speedup with respect to normal CPUs. Finally, some numerical experiments are presented.     

Multi‐commutated Flow‐through Multi‐optosensing: A Tool for Environmental Analysis

Abstract

Multi‐commutation, which refers to the use of solenoid valves to construct the flow network, has been widely used for providing automation in flow injection analysis. In this paper, the coupling of multi‐commutation and multi‐optosensing is developed for the analysis of two pesticides in environmental water samples, fuberidazole and o‐phenylphenol. In optosensing, the use of the solid support allows the discrimination between the analytes and other compounds that, if measuring in solution, would interfere in the analysis; in addition, the sensitivity needed when facing environmental samples is obtained. The two analytes are separated by using C₁₈ silica gel as solid support, taking into account their different kinetics of sorption/desorption when interacting with the solid support microbeads; the separation is performed in the same flow‐cell where the sensing detection is carried out (by using an additional amount of solid support in the cell itself above the irradiated microzone), so both separation and determination are integrated in the cell. The native fluorescence of fuberidazole and o‐phenylphenol was simultaneously measured at 314/356 and 250/345 nm, respectively. The detection limits obtained were 0.18 and 6.1 ng mL^?1 for fuberidazole and o‐phenylphenol respectively, with a sampling frequency of about 12 samples per hour. A recovery study was performed in waters obtained for wells and rivers, with satisfactory results.