The effects of solvation in the theoretical spectra of cationic dyes

We present a quantum-mechanical study on the solvent effects in the structure and electronic spectra of some cationic dyes: acridine orange, proflavine, safranine, neutral red, thionine and methylene blue. The geometry optimizations were carried out with the AM1 and DFT (with B3LYP functional) methods and the theoretical spectra of the dyes under study were obtained with Zindo time-dependent methods (TD–DFT and TD–HF). The solvation methodology adopted was the integral equation formulation (IEF) version of the polarizable continuum model (PCM).     

Assignments of carbon NMR resonances for microcrystalline ubiquitin

Solid-state NMR 2D spectroscopy was used to correlate carbon backbone and side-chain chemical shifts for uniformly (13)C,(15)N-enriched microcrystalline ubiquitin. High applied field strengths, 800 MHz for protons, moderate proton decoupling fields, 80-100 kHz, and high magic angle sample spinning frequencies, 20 kHz, were used to narrow the most of the carbon line widths to 0.5-0.8 ppm. Homonuclear magnetization transfer was effected by matching the proton RF field to the spinning frequency, the so-called dipolar-assisted rotational resonance (DARR) (Takegoshi, K.; Nakamura, S.; Terao, T. Chem. Phys. Lett. 2001, 344, 631-637), and a mixing time of 20 ms was used to maximize the intensity of one-bond transfers between carbon atoms. This polarization transfer sequence resulted in roughly 14% transfer efficiencies for directly bonded carbon pairs and 4% transfer efficiencies for carbons separated by a third carbon. With this simple procedure, the majority of the one-bond correlations was observed with moderate transfer efficiencies, and many two-bond correlations were also observed with weaker intensities. Spin systems could be identified for more than half of the amino acid side chains, and site-specific assignments were readily possible via comparison with 400 MHz (15)N-(13)C-(13)C correlation spectroscopy (described separately).     

Changes in calmodulin main-chain dynamics upon ligand binding revealed by cross-correlated NMR relaxation measurements

The fast dynamics of protein backbones are often investigated by nuclear magnetic relaxation experiments that report on the degree of spatial restriction of the amide bond vector. By comparing calmodulin in the peptide-bound and peptide-free states with these classical methods, we observe little difference in the dynamics of the polypeptide main chain (average order parameter decrease of 0.01 unit upon binding). However, when using NMR methods that monitor the mobility of the CO-Calpha bond vector, we reveal a significant reduction of dynamics of the protein main chain (average order parameter decrease of 0.048 units). Previous investigations have suggested that the side-chain dynamics is reduced by an average of 0.07 order parameter units upon ligand binding (Lee, A. L.; Kinnear, S. A.; Wand, A. J. Nat. Struct. Biol. 2000, 7, 72-77). The current findings suggest that the change of the CO-Calpha bond vector dynamics is intermediate between the changes in NH and side-chain dynamics and report a previously undetected loss of main-chain entropy. Weak site-to-site correlations between the different motional indicators are also observed.     

Activity characterization of 192Ir brachytherapy wires

Summary The radionuclide ¹⁹²Ir has been increasingly used as a brachytherapy source and manufactured in different geometry forms (thin wires, hairpins, needles or point sources). A procedure for the characterization of the activity content of ¹⁹²Ir wire sources was developed in order to establish the secondary standard activity measurement system based on the ionization chamber set up at Brazilian National Laboratory for Ionizing Radiation Metrology (LNMRI). Firstly, the ion current of the ionization chamber is measured and, subsequently, the activity is determined in a destructive analysis. This procedure enables obtaining the calibration factor for wire sources that can be used for further activity determination of similar sources in a non-destructive analysis. Accurate activity determination is needed for dosimetric measurements and for helping the manufacturers to improve its quality control programs.     

Selenium redox cycling in the protective effects of organoselenides against oxidant-induced DNA damage

The biological role of selenium is a subject of intense current interest, and the antioxidant activity of selenoenzymes is now known to be dependent upon redox cycling of selenium within their active sites. Exogenously supplied or metabolically generated organoselenium compounds, capable of propagating a selenium redox cycle, might therefore supplement natural cellular defenses against the oxidizing agents generated during metabolism. We now report evidence that selenium redox cycling can enhance the protective effects of organoselenium compounds against oxidant-induced DNA damage. Phenylaminoethyl selenides were found to protect plasmid DNA from peroxynitrite-mediated damage by scavenging this powerful cellular oxidant and forming phenylaminoethyl selenoxides as the sole selenium-containing products. The redox properties of these organoselenoxide compounds were investigated, and the first redox potentials of selenoxides in the literature are reported here. Rate constants were determined for the reactions of the selenoxides with cellular reductants such as glutathione (GSH). These kinetic data were then used in a MatLab simulation, which showed the feasibility of selenium redox cycling by GSH in the presence of the cellular oxidant, peroxynitrite. Experiments were then carried out in which peroxynitrite-mediated plasmid DNA nick formation in the presence or absence of organoselenium compounds and GSH was monitored. The results demonstrate that GSH-mediated redox cycling of selenium enhances the protective effects of phenylaminoethyl selenides against peroxynitrite-induced DNA damage.     

Single-molecule nanopore sensing of actin dynamics and drug binding

Actin is a key protein in the dynamic processes within the eukaryotic cell. To date, methods exploring the molecular state of actin are limited to insights gained from structural approaches, providing a snapshot of protein folding, or methods that require chemical modifications compromising actin monomer thermostability. Nanopore sensing permits label-free investigation of native proteins and is ideally suited to study proteins such as actin that require specialised buffers and cofactors. Using nanopores, we determined the state of actin at the macromolecular level (filamentous or globular) and in its monomeric form bound to inhibitors. We revealed urea-dependent and voltage-dependent transitional states and observed the unfolding process within which sub-populations of transient actin oligomers are visible. We detected, in real-time, filament-growth, and drug-binding at the single-molecule level demonstrating the promise of nanopore sensing for in-depth understanding of protein folding landscapes and for drug discovery.

Nanopipettes were used for real-time investigation into actin dynamics and drug binding at single-molecule resolution, showing promise for a better understanding of the mechanism of protein–protein interactions and drug discovery.     

Azametallacycles from Ag(I)- or Cu(II)-promoted coupling reactions of dialkylcyanamides with oximes at Pt(II)

The dialkylcyanamide complexes cis-[PtCl(NCNR(2))(PPh(3))(2)][BF(4)] 1 and cis-[Pt(NCNR(2))(2)(PPh(3))(2)][BF(4)](2) 2 (R = Me or Et) have been prepared by treatment of a CH(2)Cl(2) solution of cis-[PtCl(2)(PPh(3))(2)] with the appropriate dialkylcyanamide and one or two equivalents of Ag[BF(4)], respectively. Compounds 2 can also be obtained from 1 by a similar procedure. Their reaction with oximes, HON=CR'R' ' (R'R' ' = Me(2) or C(4)H(8)), in CH(2)Cl(2) and in the presence of Ag[BF(4)] or Cu(CH(3)COO)(2), leads to the novel type of azametallacycles cis-[Pt(NH=C(ON=CR'R")-NR2)(PPh3)2][BF4]2 4 upon an unprecedented coupling of the organocyanamides with oximes, in a process that proceeds via the mixed oxime-organocyanamide species cis-[Pt(NCNR(2))(HON=CR'R' ')(PPh(3))(2)][BF(4)](2) 3, and is catalyzed by either Ag(+) or Cu(2+) which activate the ligating organocyanamide by Lewis acid addition to the amide group. In contrast, in the organonitrile complexes cis-[Pt(NCR)(2)(PPh(3))(2)][BF(4)](2) 5 (R = C(6)H(4)OMe-4 or Et), obtained in a similar way as 2 (but by using NCR instead of the cyanamide), the ligating NCR is not activated by the Lewis acid and does not couple with the oximes. The spectroscopic properties of those complexes are reported along with the molecular structures of 2b (R = Et), 4a1 (R = Me, R'R' ' = Me(2)), and 4b1 (R = Et, R'R' ' = Me(2)), as established by X-ray crystallography which indicates that in the former complex the amide-N-atoms are trigonal planar, whereas in the latter (4a1 and 4b1) the five-membered rings are planar with a localized N=C double bond (imine group derived from the cyanamide) and the exocyclic amide and alkylidene groups (in 4b1) are involved in two intramolecular H-bonds to the oxygen atom of the ring.     

Rh(II) and Rh(I) two-legged piano-stool complexes: structure,reactivity, and electronic properties

The ligand 1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene, 3, was used to synthesize a mononuclear Rh(II) complex [(eta(1):eta(6):eta(1)-1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene)Rh][PF(6)](2), 6+, in a two-legged piano-stool geometry. The structural and electronic properties of this novel complex including a single-crystal EPR analysis are reported. The complex can be cleanly interconverted with its Rh(I) form, allowing for a comparison of the structural properties and reactivity of both oxidation states. The Rh(I) form 6 reacts with CO, tert-butyl isocyanide, and acetonitrile to form a series of 15-membered mononuclear cyclophanes [(eta(1):eta(1)-1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene)Rh(CO)(3)][PF(6)] (8), [(eta(1):eta(1)-1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene)Rh(CNC(CH(3))(3))(2)][PF(6)] (10), and [(eta(1):eta(1)-1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene)Rh(CO)(CH(3)CN)][PF(6)] (11). The Rh(II) complex 6+ reacts with the same small molecules, but over shorter periods of time, to form the same Rh(I) products. In addition, a model two-legged piano-stool complex [(eta(1):eta(6):eta(1)-1,4-bis[3-(diphenylphosphino)propoxy]-2,3,5,6-tetramethylbenzene)Rh][B(C(6)F(5))(4)], 5, has been synthesized and characterized for comparison purposes. The solid-state structures of complexes 5, 6, 6+, and 11 are reported. Structure data for 5: triclinic; P(-)1; a = 10.1587(7) A; b = 11.5228(8) A; c = 17.2381(12) A; alpha = 96.4379(13) degrees; beta = 91.1870(12) degrees; gamma = 106.1470(13) degrees; Z = 2. 6: triclinic; P(-)1; a = 11.1934(5) A; b = 12.4807(6) A; c = 16.1771(7) A; alpha = 81.935(7) degrees; beta = 89.943(1) degrees; gamma = 78.292(1) degrees; Z = 2. 6+: monoclinic; P2(1)/n; a = 11.9371(18) A; b = 32.401(5) A; c = 12.782(2) A; beta = 102.890(3) degrees; Z = 4. 11: triclinic; P(-)1; a = 13.5476(7) A; b = 13.8306(7) A; c = 14.9948(8) A; alpha = 74.551(1) degrees; beta = 73.895(1) degrees; gamma = 66.046(1) degrees; Z = 2.     

Laser photoinitiated nitrosylation of 3-electron reduced Nm europaea hydroxylamine oxidoreductase: kinetic and thermodynamic properties of the nitrosylated enzyme

Hydroxylamine-cytochrome c554 oxidoreductase (HAO) catalyzes the 4-e(-) oxidation of NH(2)OH to NO(2)(-) by cytochrome c554. The electrons are transferred from NH(2)OH to a 5-coordinate heme known as P(460), the active site of HAO. From P(460), c-type hemes transport the electrons through the enzyme to a remote solvent-exposed c-heme, where cyt c554 reduction occurs. When 3-60 microM NO* are photogenerated by laser flash photolysis of N,N'-bis-(carboxymethyl)-N,N'-dinitroso-1,4-phenylenediamine, in a solution containing approximately 1 microM HAO prereduced by 3 e(-)/subunit, the HAO c-heme pool is subsequently oxidized by up to 1 e(-)/HAO subunit. The reaction rate for HAO oxidation shows first-order dependence on [HAO], and zero-order dependence on [NO*] (k(obs) = 1250 +/- 150 s(-)(1)). However, the total HAO oxidized shows hyperbolic dependence on [NO*]. We suggest that NO* first binds reversibly to P(460) giving a {Fe(NO)}(6) moiety. Intramolecular electron transfer (IET) from the c-heme pool then reduces P(460) to {Fe(NO)}.(7) The overall binding constant (K) for formation of {Fe(NO)}(7) from free NO* and 3-e(-) reduced HAO was measured at (7.7 +/- 0.6) x10(4) M(-1). This value is larger than that for typical ferriheme proteins ( approximately 10(4) M(-1)), but much smaller than that for the corresponding ferroheme proteins ( approximately 10(11) M(-1)). The final product generated by nitrosylating 3-e(-) reduced HAO is believed to be the same species obtained by adding NH(2)OH to the fully oxidized enzyme. The experiments described herein suggest that when NH(2)OH and HAO first react, only two of the NH(2)OH electrons end up in the c-heme pool. The other two remain at P(460) as part of an {Fe(NO)}(7) moiety. These results are discussed in relation to earlier studies that investigated the effect of putting fully oxidized and fully reduced HAO under 1 atm of NO*.     

Lupane Pentacyclic Triterpenes Isolated from Stems and Branches of Maytenus imbricata (Celastraceae)

Four lupane pentacyclic triterpenes were isolated from the hexane extract of stems and branches of Maytenus imbricata Mart. ex Reissek : 3‐oxolup‐20(30)‐en‐29‐al ( 1 ), 30‐hydroxylup‐20(29)‐en‐3‐one ( 2 ), (11α)‐11‐hydroxylup‐20(29)‐en‐3‐one ( 3 ), and (3β)‐lup‐20(30)‐ene‐3,29‐diol ( 4 ). The structural identification of 1 – 4 was achieved by ¹H‐ and ¹³C‐NMR techniques, including 2D experiments (HSQC, HMBC, and NOESY).