Determination of Structure Corrections using Geodetic VLBI Observations of Fiducial Extragalactic Radio Sources

We present the further development of the mathematical technique for calculating the structure corrections using VLBI images of fiducial extragalactic radio sources entering the celestial reference frame. In contrast to techniques described in the literature, the proposed approach can be applied to arbitrary images rather than to images which can be represented by a few Gaussian or delta functions. This is especially topical in view of the appearance of new sophisticated and high-precision image-reconstruction techniques different from the conventional CLEAN procedure or model fitting. The calculation efficiency of the structure corrections is ensured by using the algorithm of fast Fourier transform. We apply the proposed method to analyze a sufficiently representative sample of 36 fiducial extragalactic sources entering the celestial reference frame and illustrate its use for four sources, 1357+769, 0229+131, 2201+315, and 2200+420, each of them belonging to one of the four structure-index classes.     

Spin-relaxation and magnetoresistance in FM/SC/FM tunnel junctions

The effect of spin relaxation on tunnel magnetoresistance (TMR) in a ferromagnet/superconductor/ferromagnet (FM/SC/FM) double tunnel junction is theoretically studied. The spin accumulation in SC is determined by balancing of the spin-injection rate and the spin-relaxation rate. In the superconducting state, the spin-relaxation time τ_s becomes longer with decreasing temperature, resulting in a rapid increase of TMR. The TMR of FM/SC/FM junctions provides a useful probe to extract information about spin-relaxation in superconductors.     

LIDAR mapping of ozone-episode dynamics in Paris and intercomparison with spot analyzers Supplementary material available at http://link.springer.de/journals/apb

Continuous mapping of an ozone episode in Paris in June 1999 has been performed using a differential absorption lidar system. The 2D ozone concentration vertical maps recorded over 33 h at the Champ de Mars are compiled in a video clip that gives access to local photochemical dynamics with unprecedented precision. The lidar data are compared over the whole period with point monitors located at 0-, 50-, and 300-m altitudes on the Eiffel Tower. Very good agreement is found when spatial resolution, acquisition time, and required concentration accuracy are optimized. Sensitivity to these parameters for successful intercomparison in urban areas is discussed. Received: 11 February 2002 / Published online: 14 March 2002     

Distribution of melamine in polyester–melamine surface coatings cured under nonisothermal conditions

The influence of experimental cure parameters on the diffusion of reactive species in polyester–melamine thermoset coatings during curing has been investigated with X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared. The diffusion of melamine plays a vital role in the curing process and, therefore, in the ultimate properties of coatings. At a low (<20%) hexamethoxymethylmelamine (HMMM) crosslinker concentration, the matrix composition is uniform, but at high HMMM concentrations, excess HMMM rapidly segregates to the air–coating interface. The rate of migration is governed by the difference in the surface free energies of polyester and HMMM and the concentration gradient of HMMM between the bulk and the surface. An increased rate of energy absorption also increases the rate of migration of HMMM to the surface. A physical model has been proposed to explain this surface segregation phenomenon in terms of cocondensation and self‐condensation reactions. It suggests that an appropriate amount of melamine can be segregated on the surface and allowed to self‐condense to form a desired thickness of a melamine topcoat through the control of the binder composition and cure conditions. This technique can be implemented to apply a melamine topcoat during cure. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 83–91, 2004     

Transformations of cobalt trimethylacetate complexes with pyrazole upon oxidation by air in THF

Synthetic routes to oxidation of cobalt atoms in cobalt trimethylacetate complexes containing coordinated pyrazole molecules have been considered.     

Two-dimensional on-line particle imaging velocimetry

A high-performance algorithm is described for the on-line computation of two-dimensional velocity maps using particle displacement imaging. It relies on the computation of direct correlations in a multiple-scale spatial hierarchy. Layered rejection criteria based on correlation quality and conditional averaging techniques are employed to achieve the robustness required for continuous, unsupervised operation. Implementations are described using a UNIX-based workstation and a DOS-based personal computer with a real-time image processing/correlator subsystem. The cooperation of the algorithm with other real-time visualization techniques is demonstrated using the example of colour-coded streak integration.The authors wish to thank Dr. Philippe Georis of the Université Libre de Bruxelles (ULB) for making available to us video sequences of his Marangoni convection experiment.     

Decay of confined,two-dimensional,spatially periodic arrays of vortices: A numerical investigation

The disarrangement of a perturbed lattice of vortices was studied numerically. The basic state is an exponentially decaying, exact solution of the Navier-Stokes equations. Square arrays of vortices with even numbers of vortex cells along each side were perturbed and their evolution was investigated. Whether the energy in the perturbation grows somewhat before it decays or decays monotonically depends on the initial strength of the vortices of the basic state, the extent of lateral confinement and the structure of the perturbation. The critical condition for temporally local instability, i.e. the critical amplitude of the basic state that must be exceeded to allow energy transfer from the basic state to the perturbation, is discussed. In the strongly confined case of a square lattice of four vortices the appearance of enchancement of global rotation is the result of energy transfer from the basic state to a temporally local unstable mode. Energy is transferred from the basic state to larger-scaled structures (inverse cascade) only if the scales of the larger structures are inherently contained in the initial structure of the perturbation. The initial structure of the double array of vortices is not maintained except for a very special form of perturbation. The facts that large scales decay more slowly than small scales and that, when non-linearities are sufficiently strong, energy is transferred from one scale to another explain the differences in the disarrangement process for different initial strengths of the vortices of the basic state. The stronger vortices, i.e. the vortices perturbed in a manner that increases their strength, tend to dominate the weaker vortices. The pairing and subsequent merging (or capture) of vortices of like sense into larger-scale vortices are described in terms of peaks in the evolution of the square root of the palinstrophy divided by the enstrophy.     

Application of the variation principle for the problem of buckling of a nonlinearly elastic ring nonuniform along its thickness

There has been considerable recent attention given to the stressed and buckled states of items with complicated configuration made of different nonlinearly elastic materials joined by complete adhesion. However, effective analytical solutions for such problems have been hindered by mathematical difficulties. Approximate methods have thus been developed for such problems. A variational combined principle has been formulated in this communication. A nonlinear geometrical approach has been used for formulating a mixed-type functional with physical relationships given by Euler equations, nonlinear equilibrium equations, and nonlinear boundary conditions for a piecewise-nonuniform nonlinearly elastic body composed of finite elements (particles). As an example, buckling along the nonuniform thickness of nonlinearly elastic rings was analyzed hypothetically assuming plane cross-sections. Options for two-, three-, four-, five-, and six-layered rings in a periodical structure have been reviewed. The critical buckling forces for an even number of layers have been found to be equal to each other. The ratios of the critical forces, elasticity moduli, and proportionality levels were determined for all five variants by the Runge-Kutta method.Presented at the Ninth International Conference on the Mechanics of Composite Materials (Riga, October, 1995).Translated from Mekhanika Kompozitnykh Materialov, Vol. 31, No. 2, pp. 262–268, March–April, 1995.     

The use of sulfide cluster-derived catalysts to understand the promotional effect in hydrotreatment catalysis

Sulfide cluster-derived ensembles are promising models of the active sites in commercial hydrotreatment catalysts. A series of sulfide clusters were adsorbed intact onto high-surface-area γ-alumina, magnesium oxide and activated carbon supports, then pretreated to produce highly dispersed catalytic ensembles with sizes similar to those of their precursor clusters. The activities of the bimetallic cluster-derived catalysts were significantly higher than those of the monometallic catalysts. We took this as evidence that direct interactions between molybdenum and the promoter element cause the promotional effect observed in commercial hydrotreatment catalysts. The hydrodesulfurization and hydrodenitrogenation activities correlated with the extent of molybdenum reduction. Our results suggested that the active sites in promoted hydrotreatment catalysts are centered on molecular-scale ensembles containing molybdenum, sulfur and the promoter element.     

Serial magnetic resonance imaging in patients following acute myocardial infarction.

The detection of serial changes in magnetic resonance (MR) signal intensity of the heart following acute myocardial infarction may provide a useful method of characterizing tissue healing. Fourteen patients with acute Q-wave infarction underwent T2-weighted, spin-echo cardiac imaging during hospitalization, followed by one or more additional MR studies (total 31) over a 6- to 27-wk period (mean: 3 mo). Visual assessment of the images demonstrated a gradual reduction in signal intensity and localization of the bright signal to the subendocardium of the infarction region over the three-mo study period. A quantitative measurement of signal intensity (infarction/normal myocardium) fell from 1.81 +/- 0.42 on the initial study to 1.34 +/- 0.37 (p less than 0.05) at a mean of 14 wk. Two patients had an increase in signal intensity on the follow-up study and both patients had been readmitted with acute coronary syndromes. In summary, characterization of changes in signal intensity may provide a useful method of assessing myocardial healing following acute myocardial infarction. Further studies are indicated to determine the prognostic significance of these parameters.