Quantum Dot Research: Current State and Future Prospects

This article reviews the current state of research involving semiconductor quantum dots, provides a brief review of the theory behind their unique properties, and an introduction explaining the importance of quantum dot research. The characteristic shifting of the band gap energy with quantum dot size, as predicted from the density of states for low-dimensional structures, allows experimental measurements to determine the extent to which quantum confinement effects play a role in the resulting properties. A few of the current techniques used to measure the presence and physical characteristics of quantum dots and their energy levels is reviewed, including transmission electron microscopy, optical transmission, and Raman and photoluminescence spectroscopy. Finally, some of the more exciting applications for quantum dots currently being researched for use in the field of optoelectronics are reviewed, including quantum dot infrared photodetectors, quantum dot lasers, and quantum dot solar cells. Comments are made on the current progress and the future prospects of quantum dot research and device applications.     

The relative detectability for mice of gaps having different ramp durations at their onset and offset boundaries

The effect on gap detectability of varying noise fall time (FT) and rise time (RT) of the gap boundary ramps was examined in mice using reflex modification audiometry, measuring inhibition of acoustic startle reflexes by variously shaped gaps just preceding reflex expression. In experiment 1 (n = 12) inhibition increased up to near-asymptotic values with longer FT (0, 1, 2, 3, 5, or 10 ms) and QT (quiet time, 0 to 13 ms), with a 2:1 trade-off between FT and QT. In experiment 2 (n = 24) inhibition increased for any RT above 0 ms (2, 3, 5, or 7 ms) if QT= 1 ms, but diminished with increased RT when QT = 3 or 8 ms. Enhanced detectability for subthreshold gaps by longer ramps results from their extending the apparent gap duration. The negative effect of increased RT for threshold gaps suggests the importance for gap detection of the stronger neural responses to sharp edges at the end of the gap shown previously in the mouse inferior colliculus. These effects are specific to gaps: inhibition for fixed (70-dB SPL) or varied level pulses (30 to 60 dB) was unaffected by varying the ramped edges (experiments 3 and 4, n = 9).     

Quinoline formation via a modified Combes reaction: examination of kinetics,substituent effects,and mechanistic pathways

This is the first reported investigation of the Combes condensation employing 19F NMR spectroscopy to monitor intermediate consumption and product formation rates. The reaction was found to be first order in both the diketone and aniline. Product regioselectivity and reaction rates were found to be influenced by substituents on the diketones and anilines with rates varying as much as five fold. The consumption rate of key imine and enamine intermediates mirrored quinoline formation rates, in accord with rate determining annulation. A ρ of ?0.32 was determined for this cyclization. While the sign of the reaction constant is consistent with rate limiting electrophilic aromatic substitution (EAS), the magnitude is likely a composite value, resulting from opposing substituent effects in the nucleophilic addition and EAS steps. Mechanistic details and reaction pathways supporting these findings are proposed. Copyright © 2008 John Wiley & Sons, Ltd.     

Power limitations in fiber-optic frequency-division multiplexed systems

Abstract

Launch power is limited to the milliwatt level by stimulated Brillouin scattering (SBS) in a single-channel, coherent fiber-optic network. Increasing the number of frequency-division multiplexed channels causes the power limit to decrease quickly to submilliwatt levels due to three-wave intermodulation to keep the signal-to-noise ratio from deteriorating significantly. As the number of channels increases, stimulated Raman scattering (SRS) begins to dominate. If a maximum of 0.5–dB depletion in the highest-frequency channel is allowed, SRS dominates when the number of multiplexed channels reaches about 300. Generally, the launch-power-limiting phenomenon is dependent on the number of channels being multiplexed.     

Low-energy electron beam source

Experimental results of research into a ferroelectric-plasma-source-assisted hollow anode (HA) discharge as a source of low-energy electron beams are presented. To generate electron beams, the HA auto-bias negative voltage was achieved by the discharge current flowing through the resistor connecting the HA and the grounded electrode. It is shown that this method allows reliable and reproducible generation of low-energy electron beams with electron energy of several hundreds of eV, electron current density up to several A/cm² and pulse duration of several tens of microseconds.     

Coherent Raman and Infrared Studies of Sulfur Trioxide

High-resolution (0.001 cm⁻¹) coherent anti-Stokes Raman scattering (CARS) was used to observe the Q-branch structure of the IR-inactive ν₁ symmetric stretching mode of ³²S¹⁶O₃ and its various ¹⁸O isotopomers. The ν₁ spectrum of ³²S¹⁶O₃ reveals two intense Q-branches in the region 1065–1067 cm⁻¹, with surprisingly complex vibrational–rotational structure not resolved in earlier studies. Efforts to simulate this with a simple Fermi-resonance model involving ν₁ and 2ν₄ states do not reproduce the spectral detail, nor do they yield reasonable spectroscopic parameters. A more subtle combination of Fermi resonance and indirect Coriolis interactions with nearby states, 2ν₄(1=0, ±2), ν₂+ν₄(1=±1), 2ν₂(1=0), is suspected and a determination of the location of these coupled states by high-resolution infrared measurements is under way. At medium resolution (0.125 cm⁻¹), the infrared spectra reveal Q-branch features from which approximate band origins are estimated for the ν₂, ν₃, and ν₄ fundamental modes of ³²S¹⁸O₃, ³²S¹⁸O₂¹⁶O, and ³²S¹⁸O¹⁶O₂. These and literature data for ³²S¹⁶O₃ are used to calculate force constants for SO₃ and a comparison is made with similar values for SO₂ and SO. The frequencies and force constants are in excellent agreement with those obtained by Martin in a recent ab initio calculation.     

Targetted stochastic matrix inversion

The solution of linear systems by stochastic techniques is investigated as an alternative to the widely used elimination and relaxation procedures. The Pan-Reif algorithm is used to allow any non-singular matrix to be stochastically inverted. New algorithms are devised to overcome some of the efficiency problems of the original Von Neumann-Ulam method and its refinements. The method is tested on some simple physical problems to gauge its effectiveness.     

Back focal plane imaging of Tamm plasmons and their coupled emission

The unique optical properties of Tamm plasmons (TPs) – such as flexible wavevector matching conditions including inplane wavevector within the light line, and existing both S‐ and P‐polarized TPs − facilitate them for direct optical excitation. The Tamm plasmon‐coupled emission (TPCE) from a combined photonic–plasmonic structure sustaining both surface plasmons (SPs) and TPs is described in this paper. The sensitivity of TPCE to the emission wavelength and polarization is examined with back focal plane imaging and verified with the numerical calculations. The results reveal that the excited probe can couple with both TPs and SPs, resulting in surface plasmon‐coupled emission (SPCE) and TPCE, respectively. The TPCE angle is strongly dependent on the wavelength allowing for spectral resolution using different observation angles. These Tamm structures provide a new tool to control the optical emission from dye molecules and have many potential applications in fluorescence‐based sensing and imaging.     

On the enhancement of the figure of merit in bulk nanocomposites

In this paper we make a detailed comparison of the thermoelectric properties of quantum dot superlattices with those of equivalently doped bulk material and show that a major contribution to the enhancement of the figure of merit comes from the increase of the thermoelectric power over that of bulk, in addition to the lattice thermal conductivity reduction in quantum dot superlattices. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)