On the behaviour of styrene-acrylonitrile copolymers in solution—VI. Presentation of light-scattering results according to excluded-volume theory

A new procedure for the evaluation of the excluded-volume parameter and the unperturbed dimensions from light-scattering data is described. The treatment is based upon a test recommended by Yamakawa. The principal feature is the fitting of an appropriate theoretical master-curve to the experimental points by shifting along the logarithmic x axis. The advantages are the graphical representation, the possibility of checking the chosen co-ordination of experimental and theoretical data by means of the known relation between expansion factor and molar mass, and the relatively small amount of protracted computation needed. The method is applied to azeotropic styrene/acrylonitrile copolymers and to azeotropic α-methylstyrene/acrylonitrile copolymers.     

Mechanism of the reaction of quinobromide compounds with amines

Conclusions The mechanism of the reaction of quinobromide compounds with amines was studied by the kinetic method.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1212–1214, May, 1972.     

Kinetic study of anhydride formation during thermal degradation of isotactic and atactic polymethacrylic acid

A kinetic study of anhydride formation in isotactic and atactic polymethacrylic acids (PMA) has been performed at about 200° using a vacuum thermobalance. The results obey first order kinetics and show that the rate of water loss is about four times higher for the isotactic PMA than for the atactic isomer. The activation energies are almost identical (42 ± 1 kcal per mole); it is concluded that the arrangement of neighbouring carboxyl groups is more favourable for the formation of a cyclic anhydride by intramolecular reaction in the case of the isotactic PMA.     

Mass-spectrometric behavior of some cyano-substituted 4-(β-chloroethylmercapto)-sym-triazines

Intense [M-Cl]⁺ and [M-CT₂=CCNCl]⁺ ion peaks are characteristic for the mass spectra of 4-(-chloro--cyanoethylmercapto)-sym-triazines. The introduction of monoalkylamino groups into the 2 and 6 positions of the heteroring does not lead to the development of [M-HCl]⁺ ion peaks in the mass spectra or to a change in the characteristic fragmentation pathways.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1268–1270, September, 1982.     

Further application of the diazotizationcoupling spectrophotometric technique to the determination of aromatic amines with 8-amino-1 -hydroxynaphthalene-3,6-disulphonic acid and N-(1-naphthyl)-ethylenediamine as coupling agents

Twenty-two aromatic amines are determined by the diazotization-coupling spectrophotometric technique, using 8-amino-1-hydroxynaphthalene-3,6-disulphonic acid (H-acid) and N-(1-naphthyl) ethylenediamine (N-na) as coupling agents. The following are determined by both methods: 2-and 4-ethylaniline, 4-aminobenzonitrile, 3- and 4-aminoacetophenone, 4-aminobenzophenone, 4-iodoaniline, 2,5-dichloroaniline, 4-aminohippuric acid, 2-aminobenzyl alcohol, 3-aminobenzamide, sulphathiazole, 2-, 3- and 4-methoxyaniline and 2,4-, 3,4- and 3,5-dimethylaniline. It is possible to determine 2,3- and 2,5-dimethylaniline only by the H-acid method, but 2,6-dimethylaniline cannot be determined by either method. 2-Aminobenzamide can only be determined by the N-na method. In the application of the H-acid method to the methoxyanilines and dimethylanilines, the colour is developed by adding a large excess of sodium bicarbonate and H-acid. In the application of the N-na method to the ethylanilines, methoxyanilines and 2,4-, 3,4- and 3,5-dimethylanilines, the colour is developed by addition of a large excess of N-na reagent and allowing the solution to stand overnight.     

L3/L2 white-line intensity ratios in the electron energy-loss spectra of 3d transition-metal oxides

The L₃/L₂ white-line intensity ratio in transition-metal oxides deviates widely from the statistical value of 2 : 1 but shows interesting systematics. In a series of oxides of a given metal, the ratio reaches a maximum for the d⁵ configuration (e.g. MnO) and a minimum for the d⁰ configuration (e.g. KMnO₄). In a series of monoxides, sesquioxides and dioxides of different metals, the ratio is again a maximum at the d⁵ configuration and decreases as the configuration changes towards d⁰ or d¹⁰. Our results, obtained by electron energy-loss spectroscopy, carried out in an electron microscope, are interpreted on an atomic mechanism involving spin-spin coupling. According to this model, the L₂ transition probability decreases in the progression d⁰ to d⁵ whereas the L₃ transition probability decreases beyond d⁵.     

Mechanism and kinetics of the hydrogenation of CO to saturated hydrocarbons and alcohols on supported bimetallic catalysts containing rhodium

The mechanism of the simultaneous formation of methane, ethane, propane, methanol, ethanol, and propanol from carbon monoxide and hydrogen over supported bimetallic catalyst, Rh-M/Al₂O₃, has been established on the basis of kinetic and adsorption data. The experimental data are described quantitatively by kinetic and thermodynamic parameters calculated using the kinetic model.L. V. Pisarzhevskii Institute of Physical Chemistry, Ukraine National Academy of Sciences, Ukraine, 252039 Kiev, Nauki Prosp. 31. D. V. Sokol'skii Institute of Organic Catalysis and Electrochemistry, Kazakhstan National Academy of Sciences, Kazakhstan, 480110 Alma Ata, D. Kunaev Street, 142. Translated from Teoreticheskeskaya i Éksperimental'naya Khimiya, Vol. 32, No. 2, pp. 97–101, March–April, 1996. Original article submitted May 23, 1995.     

Prediction of chromatographic parameters for some anilines by molecular connectivity

Summary The possible relation existing between R_F values obtained by thin-layer chromatography for a group of anilines with connectivity indices proposed by Kier and Hall has been studied. Using multivariable regression the corresponding connectivity functions, selected for their respective correlation coefficients, standard deviations, Snedecor's F and Student's t were obtained. Regression analysis of the connectivity functions gives a correct prediction of the experimental elution sequence for this group of substances on silica gel stationary phases and various mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, showing good stability and null randomness in all cases.     

Neue Fluropalladate(II)

New Fluoropalladates(II) Single crystal investigations on \documentclass{article}\pagestyle{empty}\begin{document}$ \begin{array}{*{20}c} {[6][4]} \\ {{\rm CsPdPdF}_{\rm 5} } \\ \end{array} $\end{document} (orange brown) demonstrate the close structural relationship to the CsAgFeF₆ – and CsNiNiF₆-type, respectively. One half of the Pd²⁺ ions is surrounded octahedrally, whereas the other half, because of the “absence” of one F^?, is coordinated planar quadratically. CsPd₂F₅ crystallizes orthorhombic (Imma – D, No. 74; Z = 4) with a = 6.53₃, b = 7.86₂, c = 10.79 Å (four circle diffractometer data). From Guinier data are isotypic CsMgPdF₅ (yellow, a = 6.603(2), b = 7.415(2), c = 10.548(3) Å), CsZnPdF₅ (beige, a = 6.576(1), b = 7,483(2), c = 10.645(2) Å), CsNiPdF₅ (yellow, a = 6.499(1), b = 7.504(2), c = 10.575(3) Å) and CsCoPdF₅ (brown, a = 6.527(1), b = 7.553(1), c = 10.659(2) Å). Besides of CsPd₂F₅ there exist compounds of the composition Me₃PdF₅ on the alkali-rich side of the system MeF/PdF₂. Single crystal investigations for Rb₃PdF₃ (yellow, P4/mbm–D, No. 127; Z = 2) led to a = 7.46₇, c = 6.49₇ Å (four circle diffractometer data). Isotypic are (single crystal data) Cs₃PdF₅ (yellow, a = 7.84₈, c = 6.68₈ Å) and Rb₂CsPdF₅ (yellow, ordered distribution of the alkali ions, a = 7.57₅, c = 6.44₅ Å).     

Dissolved oxygen: the electroanalytical chemists dilemma

Electroanalytical chemistry has been plagued for decades with the problems associated with dissolved oxygen. Dissolved oxygen is electrochemically reduced at potentials less negative than ?0.05 V vs. standard calomel electrode (SCE) and, therefore, interferes with detection of many species when using reductive voltammetry. Historically, electroanalytical chemists have taken the view that dissolved oxygen should be removed from the sample solution in order to overcome the interference problems. However, there are drawbacks associated with this approach, particularly when dealing with flowing solutions. More recently an alternative approach, the development of voltammetric methods which are not so prone to dissolved oxygen interference, has been taken by various workers.