Two-, three-, and four-coordinate Ag(I) coordination polymers formed by the novel phosphinite PPh2(3-OCH2C5H4N)

The novel phosphinite PPh(2)(3-OCH(2)C(5)H(4)N) (1) has been synthesized, and its coordination properties to Ag(I) have been studied. When reacted in a 1:1 ratio with Ag(I), coordination polymers with different coordination numbers about the Ag are found depending on the anion. For PPh(2)(3-OCH(2)C(5)H(4)N)AgBF(4) (2), a two-coordinate Ag is observed with a P-Ag-N angle of 167 degrees. Mixed three and four coordination about Ag is observed for PPh(2)(3-OCH(2)C(5)H(4)N)AgOTf (3), and for the trifluoroacetate derivative, PPh(2)(3-OCH(2)C(5)H(4)N)Agtfa (4), only a four-coordinate Ag is produced. X-ray crystal-structure determinations for compounds 2-4 have been carried out. The X-ray structures show a wide range of Ag-Ag distances in the polymers, which are dependent on the conformation of the bridging ligand.     

Homolysis of weak Ti-O bonds: experimental and theoretical studies of titanium oxygen bonds derived from stable nitroxyl radicals

Titanium-oxygen bonds derived from stable nitroxyl radicals are remarkably weak and can be homolyzed at 60 degrees C. The strength of these bonds depends sensitively on the ancillary ligation at titanium. Direct measurements of the rate of Ti-O bond homolysis in Ti-TEMPO complexes Cp2TiCl(TEMPO) (3) and Cp2TiCl(4-MeO-TEMPO) (4) (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl, 4-MeO-TEMPO = 2,2,6,6-tetramethyl-4-methoxypiperidine-N-oxyl) were conducted by nitroxyl radical exchange experiments. Eyring plots gave the activation parameters, deltaH++ = 27(+/- 1) kcal/mol, deltaS++ = 6.9(+/- 2.3) eu for 3 and deltaH++ = 28(+/- 1) kcal/mol, deltaS++ = 9.0(+/- 3.0) eu for 4, consistent with a process involving the homolysis of a weak Ti-O bond to generate the transient Cp2Ti(III)Cl and the nitroxyl radical. Thermolysis of the titanocene TEMPO complexes in the presence of epoxides leads to the Cp2Ti(III)Cl-mediated ring-opening of the epoxide followed by trapping by the nitroxyl radical. The X-ray crystal structure of the Ti-TEMPO derivative, Cp2TiCl(4-MeO-TEMPO) (4), is reported. DFT (B3LYP/6-31G*) calculations and experimental studies reveal that the strength of the Ti-O bond decreases dramatically with the number of cyclopentadienyl groups on titanium. The calculated Ti-O bond strength of the monocyclopentadienyl complex 2 is 43 kcal/mol, whereas that of the biscyclopentadienyl complex 3 is 17 kcal/mol, a difference of 26 kcal/mol. These studies reveal that the strength of these Ti-O bonds can be tuned over an interesting and experimentally accessible temperature range by appropriate ligation on titanium.     

Rapid quantitative capillary zone electrophoresis method for monitoring the micro-heterogeneity of an intact recombinant glycoprotein

A simple high-resolution capillary zone electrophoresis (CZE) method capable of rapidly assessing the micro-heterogeneity of a 24 kDa molecular weight glycoprotein, has been developed. Separation is carried out using a bare silica capillary at a pH of 2.5 in a commercially available electrophoresis buffer system composed of triethanolamine and phosphoric acid. Over 30 peaks were detected within a run time of 15 min using a 27 cm capillary and approximately 60 peaks were detected using a 77 cm capillary. Although most of the peaks arise from differences in the oligosaccharide structures present on the one glycosylation site on this molecule, other forms of micro-heterogeneity due to the presence of the nonglycosylated form of this glycoprotein and various types of chemical degradation, e.g., deamidation, are also responsible for the multitude of peaks observed. Although the exact chemical identity of each peak in the resulting electropherogram of this glycoprotein is not known, useful information can be obtained for assessing comparability, stability, and batch consistency. Factors impacting the resolution, precision, accuracy, and robustness of the assay are also discussed along with inherent advantages and limitations associated with measuring the micro-heterogeneity of intact glycoproteins.     

An Asymmetric Synthesis of L-694,458, a Human Leukocyte Elastase Inhibitor, via Novel Enzyme Resolution of beta-Lactam Esters

A convergent synthesis of [S-(R,S)]-2-[4-[(4-methylpiperazin-1-yl)carbonyl]phenoxy]-3,3-diethyl-N-[1-[3,4-(methylenedioxy)phenyl]butyl]-4-oxo-1-azetidinecarboxamide (L-694,458, 1), a potent human leukocyte elastase inhibitor, was achieved via chiral synthesis of key intermediates: (S)-3,3-diethyl-4-[4'-[(N-methylpiperazin-1-yl)carbonylphenoxy]-2-azetidinone (2) and (R)-alpha-propylpiperonyl isocyanate (3). Synthesis of beta-lactam 2 was achieved by a novel enantioselective lipase hydrolysis of ester 5 to produce (S)-3,3-diethyl-4-(4'-carboxyphenoxy)-2-azetidinone (6) (60% yield, three cycles, 93% ee) with isolation, epimerization, and recycling of the undesired (R)-ester 5. Isocyanate 3 was prepared by chiral addition of Zn(n-Pr)(2) to piperonal (98% yield, 99.2% ee), azide displacement and reduction to (R)-alpha-propylpiperonylamine (11) (58% yield, 85% ee), crystallization as the D-pyroglutamic acid salt (92% yield, 98.2% ee), and isocyanate formation (98% yield) with phosgene.     

Eu(III)-cyclen-phen conjugate as a luminescent copper sensor: the formation of mixed polymetallic macrocyclic complexes in water

The cationic cyclen based Eu(III)-phen conjugated 1.Eu was synthesised as a chemosensor for Cu(II), where the recognition in water at pH 7.4 gave rise to quenching of the Eu(III) luminescence and the formation of tetranuclear polymetallic Cu(II)-Eu(III) macrocyclic complexes in solution where Cu(II) was bound by three 1.Eu conjugates.     

Secondary deuterium kinetic isotope effects in irreversible additions of allyl reagents to benzaldehyde

The competitive kinetics of additions of allyl to benzaldehyde-h and -d from allyltributyl tin, from diisopropyltartrylallyl boronate, and from allyl bromide and zinc dust in aqueous tetrahydrofuran have inverse secondary deuterium kinetic isotope effects, SDKIEs. These inverse SDKIEs are in contrast to the normal SDKIEs that were obtained with allyl lithium and allyl Grignard, suggesting rate-determining single-electron transfer in these cases. By various MO calculations the transition state for addition of allyl boronate occurs with substantial B-O bond formation and little C-C bond formation. The magnitudes of the SDKIEs with the other two allylating reagents, when compared with reasonable equilibrium isotope effects for the addition, suggest transition states with substantial C-C bond formation.     

Thermochemistry of bis-arene- and arenetricarbonyl-chromium compounds containing hexamethylbenzene, 1,3,5-trimethylbenzene and naphthalene.

Microcalorimetric measurements at elevated temperatures of the heats of thermal decomposition and iodination have led to values of the standard enthalpies of formation of the following crystalline compounds (values given in kJ mol^?1) at 298K: [Cr(η⁶-1,3,5-C₆H₃(CH₃)₃)₂] = (63±12); [Cr(η⁶-C₆(CH₃)₆)₂] : -(88±12); [Cr(1,2,3,4,4a,8a-η-C₁₀H₈)₂] = (407±11); [Cr(CO)₃(1,2,3,4,4a,8a-η-C₁₀H₈)] = -(258±8). Separate measurements by the vacuum sublimation microcalorimetric technique gave the following values for the enthalpy of sublimation at 298K (kJ mol^?1) : [Cr(η⁶-1,3,5-C₆H₃(CH₃)₃)₂] = (104±1); [Cr(η⁶-C₆(CH₃)₆)₂] = (119±4); [Cr(CO)₃(1,2,3,4,4a,8a-η-C₁₀H₈)] = (107±3). From these and other data, the bond enthalpy contributions of the metal-ligand bonds in the gaseous metal complexes were evaluated as follows: [(η₆-C₆(CH₃)₆)-Cr] (155±7); [(η⁶-C₆H₃(CH₃)₃)-Cr] (151±6); [(1,2,3,4,4a, 8a-η-C₁₀H₈)-Cr](145±6) kJ mol^?1]The question of the transferability of the enthalpy contributions of chromium—ligand bonds between organochronium complexes is discussed with aid of information from structural and spectroscopic investigation. The limitations of the procedure are defined.The thermodynamic data are used to discuss various substitution, redistribution and exchange reaction of Cr(η-arene)₂ and [Cr(CO)₃(η-arene)] compounds.     

Self-assembly of phosphate fluorosurfactants in carbon dioxide

Anionic phosphodiester surfactants, possessing either two fluorinated chains (F/F) or one hydrocarbon chain and one fluorinated chain (H/F), were synthesized and evaluated for solubility and self-assembly in liquid and supercritical carbon dioxide. Several surfactants, of both F/F and H/F types and having varied counterions, were found to be capable of solubilizing water-in-CO2 (W/C), via the formation of microemulsions, expanding upon the family of phosphate fluorosurfactants already found to stabilize W/C microemulsions. Small-angle neutron scatteringwas used to directly characterize the microemulsion particles at varied temperatures, pressures, and water loadings, revealing behavior consistent with previous results on W/C microemulsions.     

Microwave promoted amination of 3-bromoisoxazoles

This Letter describes the amination of 3-bromoisoxazoles by a nucleophilic aromatic substitution reaction. We have found 3-bromoisoxazoles to be inert to substitution under thermal conditions, however, the employment of phosphazene bases under microwave irradiation facilitates the amination process and allows the corresponding 3-aminoisoxazoles to be isolated in moderate yield.     

Methyl displacements from cyclopentadienyl ring planes in sterically crowded (C5Me5)3M complexes

The displacements of the methyl substituents away from the metal and out of the cyclopentadienyl ring plane are compared in sterically crowded (C(5)Me(5))(3)M complexes vs sterically normal f-element complexes in an attempt to evaluate the utility of this parameter in predicting unusual (C(5)Me(5))(1-) ring reactivity. The out-of-plane displacements of 16 sterically crowded tris(cyclopentadienyl) complexes of general formula (C(5)Me(5))(3)M, (C(5)Me(4)R)(3)M (R = Et, (i)Pr, (t)()Bu, SiMe(3)), (C(5)Me(5))(3)MX (X = anion), and (C(5)Me(5))(3)ML (L = neutral ligand) are compared with [(C(5)Me(5))(2)U](2)(C(6)H(6)), (C(5)Me(5))(2)Sm(PC(4)H(2)(t)Bu(2)), and 33 representative examples of f-element bis(cyclopentadienyl) complexes with normal cyclopentadienyl behavior and coordination numbers ranging from 6 to 10. In general, the methyl displacement values of sterically crowded complexes overlap with those in the other complexes, which demonstrates that the basis of the structural distortions is complex. However, if the most extreme out-of-plane displacement in each of the sterically crowded complexes is examined vs the analogous maximum out-of-plane displacement in less crowded systems, there appears to be a basis for predicting cyclopentadienyl reactivity.