Influence of the settling of the resin beads on diffusion gradients in thin films measurements

Binding resin beads used in DGT (diffusion gradients in thin films) tend to settle to one side of the resin during casting. This phenomenon might be relevant for metal accumulation when partially labile complexes dominate the metal speciation, especially after recognizing the important role played by complex dissociation in the resin domain. The influence of the inhomogeneity of the binding agent distribution on metal accumulation is here assessed by numerical simulation of DGT devices with binding beads in only one half of the resin disc, as a reasonable model of the standard resin discs. Results indicate that a decrease in mass accumulation of less than 13% can arise in these inhomogeneous devices (as compared with an ideal disc with homogeneous dispersion of the resin beads) when complexes with stability constant K < 10² m³ mol⁻¹ (K < 10⁵ L mol⁻¹) dominate the metal speciation. The loss increases as K increases, but the percentage of mass loss always remains lower than the volume fraction of resin disc without beads. For very labile or inert complexes, the impact of the inhomogeneous distribution of binding resin beads is negligible. As kinetic dissociation constants of complexes can be estimated from the distribution of the metal accumulation in a DGT device with a stack of two resin discs, the influence of the inhomogeneity on the recovered kinetic constant is also assessed. For the cases studied, the recovered kinetic dissociation constant, k_d,recovered, retains the correct order of magnitude, being related to the true k_d by k_d ≈ f⁻¹ k_d,recovered, quite independently of K and k_d values, being f the fraction of volume of the resin disc where resin beads are dispersed.     

Ultra high performance liquid chromatography tandem mass spectrometric detection of glucuronides resistant to enzymatic hydrolysis: Implications to doping control analysis

Controversial results have been reported in the literature regarding the behavior of two testosterone (T) metabolites (3α-glucuronide-6β-hydroxyandrosterone and 3α-glucuronide-6β-hydroxyetiocholanolone) excreted after T administration. Due to their potential as biomarkers of T misuse, a UHPLC–MS/MS method for the direct quantification of these glucuronides was developed and validated. In addition, the main phase II metabolites of T that compose the steroid profile used for doping control purposes (glucuronides of T, epitestosterone, androsterone and etiocholanolone) were included. The method was found to be linear and with suitable LODs and LOQs for all metabolites. The average accuracies were between 86% and 120%, the RSDs for the intra- and inter-day precision were below 15% and 25% respectively. The method showed low matrix effect. Samples obtained before and after the administration of T were analyzed by both the developed UHPLC–MS/MS method and the GC–MS/MS method currently used by anti-doping laboratories. Relevant disagreements between the results obtained for 3α-glucuronide-6β-hydroxyandrosterone and 3α-glucuronide-6β-hydroxyetiocholanolone quantitation were observed. These markers seemed to be more suitable for the screening of T misuse when detected by UHPLC–MS/MS. These discrepancies were further investigated in 50 urine samples from healthy volunteers. The two methods gave highly correlated results for all metabolites that are currently included in the athlete's steroid profile confirming the reliability of the UHPLC–MS/MS method. However, the quantification of 3α-glucuronide-6β-hydroxyandrosterone and 3α-glucuronide-6β-hydroxyetiocholanolone, was only possible by using the UHPLC–MS/MS method since three interfering compounds were observed when performing the GC–MS/MS analysis with the most intense ion transitions. These results confirm the potential of the resistant glucuronides as biomarkers of T misuse. Additionally, they suggest that previously reported reference ranges for these metabolites should be reevaluated.     

Dynamics of DNA adsorption on and release from SDS-DDAB cat-anionic vesicles: a multitechnique study

DNA adsorption and release from cat-anionic vesicles made of sodium dodecylsulfate-dodecyldimethylammonium bromide (SDS-DDAB) in nonstoichiometric amounts was investigated by different electrochemical, spectroscopic, and biomolecular strategies. The characterization of the vesicular system was performed by dynamic light scattering, which allowed estimating both its size and distribution function(s). The interaction dynamics was followed by dielectric spectroscopy and zeta-potential, as well as by agarose gel electrophoresis, AGE. Also, circular dichroism, CD, measurements were carried out, to ascertain possible structural rearrangements of DNA, consequent to the interactions with the cat-anionic vesicles. CD demonstrates that vesicle-bound DNA retains its native conformation. The results obtained by the aforementioned techniques are consistent and indicate that binding saturation is obtained at a [DNA/vesicles] charge ratio close to 0.8, considering only the excess surface charges on the vesicles. This result is apparently in contradiction with a purely electrostatic approach and is tentatively ascribed to the distance between charges on the biopolymer and the vesicle surface, respectively. A possible interpretation is discussed. The nucleic acid can be completely retrieved from the vesicles upon addition of adequate amounts of SDS, which is the defective surfactant in the vesicular system. Precipitation of the poorly soluble SD-DDA salt results in an almost complete release of DNA.     

Polycyclic framework synthesis of anominine and tubingensin A indole diterpenoids

A highly congested decalin embodying an alpha-methylene ketone is synthesized in 11 steps from the Wieland-Miescher ketone and efficiently converted to the polycyclic frameworks of anominine and tubingensin A, which constitutes the first approach to the skeleton of these indole diterpenoids.     

Analysis of alkyl and 2-6-ringed polycyclic aromatic hydrocarbons by isotope dilution gas chromatography/mass spectrometry. Quality assurance and determination in Spanish river sediments

An accurate, precise and sensitive method is described for the analysis of 29 polycyclic aromatic hydrocarbons (PAHs), including 19 2-6-ringed PAHs and 10 alkyl-PAHs. The method is based on an isotope dilution technique using gas chromatography/mass spectrometry (GC/MS) and available labeled PAHs as internal standards. Quality parameters were calculated with satisfactory results and 36 Spanish river sediments were analysed. Results were evaluated regarding to the sediment quality guidelines (SQGs) based on the effects range-low (ERL) and the effects range-median (ERM) values. Most analysed sediments showed a good quality, since only 7 of them exceeded ERL values, including one sample surpassing ERM values. PAH profiles were studied in order to identify PAH sources as mainly petrogenic or pyrogenic. Most samples showed petrogenic-type fingerprints, although 6 of the 11 sediments with the highest PAH concentrations (> 1000 ng/g) were classified as pyrogenic, including 4 of the 7 samples exceeding ERL values. Quality assurance was carried out by the triplicate analysis of one preanalysed river sediment without PAHs subsequently spiked at a medium (500 ng/g) and a low concentration level (10 ng/g) of each analyte. Main quality requirements for methods based on isotope dilution were accomplished. Method accuracy was 80-120% for most PAHs, method precision was <15% for all the analysed compounds and method detection limits (MDLs) were 1-3 ng/g.     

Anserine and carnosine determination in meat samples by pure micellar liquid chromatography

Anserine and carnosine, which are both imidazole dipeptides, are natural antioxidants that are present in some types of meat. A pure micellar liquid chromatographic procedure was developed using a micellar mobile phase of 0.10 M sodium dodecyl sulphate buffered at pH 7, an amino column and UV detection. Three types of stationary phases (C18, phenyl and amino columns) were examined and the procedure was used to determine the two compounds in meat samples. They were completely resolved without any interference from the protein band. Total analysis time was 12 min. The limits of detection (ng/mL) were 71 and 53 for anserine and carnosine, respectively. Calibration curves were constructed on three different days (r>0.998). Repeatability and intermediate precision were evaluated at three different concentrations in meat matrices, the residual standard deviations being below 2.1%. Meat samples of poultry, pork and beef were injected directly into the chromatographic system after extraction in a sodium dodecyl sulphate solution and filtration. The possibility of direct injection using micellar liquid chromatography reduces the cost and time of analyses, and decreases error sources owing to minimised risks of losses and chemical changes in the analytes. Moreover, the selection of a pure mobile phase of sodium dodecyl sulphate allows this procedure to offer a number of advantages, such as non-toxicity, non-flammability, biodegradability and low cost, in comparison with aqueous-organic solvents. Its simplicity, then, makes it a good candidate for application in routine analysis in the area of food control and quality.     

Ultrasound-assisted extraction of pesticides from olive branches: a multifactorial approach to method development

A rapid and simple method has been developed for the analysis in olive branches of two insecticides currently used in olive pest control, dimethoate and α-cypermethrin. The effects of analytical conditions on pesticide recovery and the optimal extraction conditions were evaluated by means of a factorial design. The use of this chemometric tool in analytical method development allows the identification of the principal and interaction effects of the extraction conditions on the recovery of pesticides. It also gives information about the location of pesticide maximum recovery with minimal experimental investment. Extraction was carried out with an ultrasonic bath and the experimental conditions studied included the volume of extractant, the time of extraction, the number of extraction steps and the sample weight. The sample was further cleaned up using a Florisil solid-phase extraction cartridge. For the overall extraction procedure, recoveries of 99 % for α-cypermethrin and 90 % for dimethoate from the spiked samples were found for 1 g of sample extracted three times with 35 mL hexane, sonicating for 2 min in each step. The complete process including ultrasonic extraction and filtration will not require more than 15–20 min, in contrast with several hours for conventional liquid–solid extraction techniques. The proposed method allows a high sample throughput, as commonly required in monitoring studies.     

New thermosets obtained from DGEBA and Meldrum acid with lanthanum and ytterbium triflates as cationic initiators

Ytterbium and lanthanum triflates were used as cationic initiators to cure mixtures of diglycidylether of bisphenol A (DGEBA) and Meldrum acid (MA) in several proportions of comonomers and initiators. The evolution of epoxy and lactone groups during curing, and of linear ester formed in the final materials were evaluated by Fourier transform infrared in the attenuated-total-reflection mode (FTIR/ATR).

The global evolution of the curing process was investigated by calorimetric analysis and the activation energy was calculated by isoconversional procedures.

Shrinkage on curing and thermal degradability of the final materials on varying the initiator and the proportion of Meldrum acid in the mixtures were evaluated. The expandable character of MA was confirmed. The materials obtained were more degradable than conventional epoxy resins due to the tertiary ester groups incorporated into the network by copolymerization, especially those obtained with ytterbium triflate. On increasing the proportion of initiator the degradability was also increased.     

Headspace mass spectrometry methodology: application to oil spill identification in soils

In the present work we report the results obtained with a methodology based on direct coupling of a headspace generator to a mass spectrometer for the identification of different types of petroleum crudes in polluted soils. With no prior treatment, the samples are subjected to the headspace generation process and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of volatiles in the sample analysed. The mass spectrum corresponding to the mass/charge ratios (m/z) contains the information related to the composition of the headspace and is used as the analytical signal for the characterization of the samples. The signals obtained for the different samples were treated by chemometric techniques to obtain the desired information. The main advantage of the proposed methodology is that no prior chromatographic separation and no sample manipulation are required. The method is rapid, simple and, in view of the results, highly promising for the implementation of a new approach for oil spill identification in soils. Figure PCA score plots illustrate clear discrimination of types of crude oil in polluted soil samples (e.g. results are shown for vertisol)     

Phthalates determination in physiological saline solutions by HPLC-ES-MS

Phthalates are a group of chemical compounds with increasing interest from the analytical point of view. The risks for human health associated with some of these compounds have unleashed the necessity to develop analytical methods with great sensitivity that allow us to detect their presence at trace levels in order to assure protection for the population.

A simple and rapid method for determining a group of phthalate esters in aqueous samples was developed. The method was based on high-performance liquid chromatography–(electrospray)-mass spectrometry (HPLC–ES-MS), working in positive ionisation (PI) mode. A gradient elution was performed with acetonitrile–ultrapure water starting from 5 to 75% acetonitrile in 5 min followed by isocratic elution during 5 min. Standard calibration curves were linear for all the analytes over the concentration range 10–500 ng mL⁻¹ .The LOD values found for DMP, DEP, BBP and DBP were 0.8, 3.4, 0.6 and 1.2 ng mL⁻¹ respectively. The relative standard deviation ranged from 0.8 to 1.7%, which indicated good method precision.

The proposed analytical method has been applied to the analysis of commercial physiological saline solutions in order to check the presence of phthalates and to determine their concentration.