Therapeutic monitoring of imipramine and desipramine by micellar liquid chromatography with direct injection and electrochemical detection

A micellar liquid chromatographic (MLC) procedure was developed for the clinical monitoring of imipramine and its active metabolite, desipramine. The determination of these highly hydrophobic substances was carried out after direct injection of the serum samples using a mobile phase composed of 0.15 m SDS--6% (v/v) pentanol buffered at pH 7, pumped at 1.5 mL/min into a C(18) column (250 x 4.6 mm), and electrochemical detection at 650 mV. Using this MLC method, calibration was linear (r > 0.995) and the limits of detection (ng/mL) were 0.34 and 0.24 for imipramine and desipramine, respectively. Repeatabilities and intermediate precision were tested at three different concentrations in the calibration range and a CV (%) below 2.2 was obtained. In this MLC procedure, the serum is determined without treatment, thus allowing repeated serial injections without changes in retention factors, and reducing the time and consumables required to carry out the pretreatment process. The assay method can be applied to the routine determination of serum imipramine and its metabolite in therapeutic drug monitoring.     

Interaction of antimicrobial arginine-based cationic surfactants with liposomes and lipid monolayers

The present work examines the relationship between the antimicrobial activity of novel arginine-based cationic surfactants and the physicochemical process involved in the perturbation of the cell membrane. To this end, the interaction of these surfactants with two biomembrane models, namely, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar lipid vesicles (MLVs) and monolayers of DPPC, 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] sodium salt (DPPG), and Escherichia coli total lipid extract, was investigated. For the sake of comparison, this study included two commercial antimicrobial agents, hexadecyltrimethylammonium bromide and chlorhexidine dihydrochloride. Changes in the thermotropic phase transition parameters of DPPC MLVs in the presence of the compounds were studied by differential scanning calorimetry analysis. The results show that variations in both the transition temperature (Tm) and the transition width at half-height of the heat absorption peak (deltaT1/2) were consistent with the antimicrobial activity of the compounds. Penetration kinetics and compression isotherm studies performed with DPPC, DPPG, and E. coli total lipid extract monolayers indicated that both steric hindrance effects and electrostatic forces explained the antimicrobial agent-lipid interaction. Overall, in DPPC monolayers single-chain surfactants had the highest penetration capacity, whereas gemini surfactants were the most active in DPPG systems. The compression isotherms showed an expansion of the monolayers compared with that of pure lipids, indicating an insertion of the compounds into the lipid molecules. Owing to their cationic character, they are incorporated better into the negatively charged DPPG than into zwitterionic DPPC lipid monolayers.     

Electronic Structure of Rh(2)(&mgr;-CO)(CO)(2)(H(2)PCH(2)PH(2))(2). An Example of a Non-A-Frame Structure

Calculations based on density functional theory (DFT) and Hartree-Fock configuration interaction (HF-CI) methodology have been carried out to investigate the rhodium-rhodium coupling in Rh(2)(CO)(2)(dppm)(2), 1 (dppm = Ph(2)PCH(2)PPh(2)) and in Rh(2)(&mgr;-CO)(CO)(2)(dppm)(2), 2. DFT geometries, obtained with the Dgauss program, are in good agreement with those determined from X-ray, but HF geometries, calculated using the same basis sets, yield bond distances systematically too long. Calculations indicate that the rhodium atoms in 1 are linked by a single bond. The insertion of a semibridging carbonyl between the two metal atoms leads to a shortening of the rhodium-rhodium distance and also to a noticeable weakening of the metal-metal interaction. Both effects, and also the stabilization of the HOMO of 2, are related to an observed change from square planar to tetrahedral of the ligand environment of the Rh atom proximal to the inserted CO. Both MO analysis and bond characterization from the topology of the charge density confirm the existence of a bonding interaction between the semibridging carbonyl and the distal rhodium atom. The electronic structures of the dicationic complex [Rh(2)(CO)(3)(dppm)(2)](2+) and of the A-frame-like, isoelectronic system Rh(2)Br(2)(&mgr;-CO) (dppm)(2) are also discussed. The electron deformation density is derived from 2 by means of several methodological approaches, namely, HF, HF-CI, DFT, and DFT + gradient corrections. The HF deformation density obtained in the plane containing the metals and the three CO ligands is discussed, as well as the "correlation density" obtained from the difference maps DFT - HF and CI - HF.     

On the automatic restricted-step rational-function-optimization method

The rational function optimization algorithm is one of the widely used methods to search stationary points on surfaces. However, one of the drawbacks of this method is the step reduction procedure to deal with the overstepping problem. We present and comment on a method such that the step obtained from the solution of the rational function equations possesses the desired correct length. The analysis and discussion of the method is mainly centered on the location and optimization of transition states. Received: 18 June 1998 / Accepted: 17 September 1998 / Published online: 23 November 1998     

Energy decomposition in molecular complexes: implications for the treatment of polarization in molecular simulations

This study examines the contribution of electrostatic and polarization to the interaction energy in a variety of molecular complexes. The results obtained from the Kitaura-Morokuma (KM) energy decomposition analysis at the HF/6-31G(d) level indicate that, for intermolecular distances around the equilibrium geometries, the polarization energy can be determined as the addition of the polarization energies of interacting blocks, as the mixed polarization term is typically negligible. Comparison of KM and QM/MM results shows that the electrostatic energy determined in the KM method is underestimated (in absolute value) by QM/MM methods. The reason of such underestimation can be attributed to the simplified representation of treating the interaction between overlapping charge distribution by the interaction of a QM molecule with a set of point charges. Nevertheless, the polarization energies calculated by KM and QM/MM methods are in close agreement. Finally, a consistent, automated strategy to derive charge distributions that include implicitly polarization effects in pairwise, additive force fields is presented. The strategy relies in the simultaneous fitting of electrostatic and polarization energies computed by placing a suitable perturbing particle at selected points around the molecule. The suitability of these charges to describe molecular interactions is discussed.     

Quantitative vs. qualitative approaches to the electronic structure of solids

The usefulness of qualitative and quantitative theoretical approaches in solid state chemistry is discussed by considering three different types of problems: (a) the distribution of boron and carbon atoms in MB₂C₂ (M=Ca, La, etc.) phases, (b) the band structure and Fermi surface of low-dimensional transition metal oxides and bronzes, and (c) the correlation between the crystal and electronic structure of the ternary nitride Ca₂AuN.     

Michael additions of benzoins versus Michael-Stetter additions of aldehydes

Triethylamine catalyzed Michael additions of benzoins to chalcone can prevail over the expected Michael-Stetter additions when certain thiazolium ion conjugate bases - prepared $\text{in situ}$ from the pertinent thiazolium salts and triethylamine- are used as catalysts.     

LBGK method coupled to time splitting technique for solving reaction-diffusion processes in complex systems

A new approach to numerically solve a reaction-diffusion system is given, specifically developed for complex systems including many reacting/diffusing species with broad ranges of rate constants and diffusion coefficients, as well as complicated geometry of reacting interfaces. The approach combines a Lattice Boltzmann (LB) method with a splitting time technique. In the present work, the proposed approach is tested by focusing on the typical reaction process between a metal ion M and a ligand L, to form a complex ML with M being consumed at an electrode. The aim of the paper is to systematically study the convergence conditions of the associated numerical scheme. We find that the combination of LB with the time splitting method allows us to solve the problem for any value of association and dissociation rate constant of the reaction process. Also, the method can be extended to a mixture of ligands. We stress two main points: (1) the LB approach is particularly convenient for the flux computation of M and (2) the splitting time procedure is very well suited for reaction processes involving association-dissociation rate constants varying on many orders of magnitude.     

Analysis of conformational equilibria in aplidine using selective excitation 2D NMR spectroscopy and molecular mechanics/dynamics calculations

Aplidine (dehydrodidemnin B), a natural product with potent antitumor activity currently in multicenter phase II clinical trials, exists in DMSO as a mixture of four slowly interconverting conformations in a ratio of 47:33:13:7. NMR spectroscopy shows that these arise as a consequence of cis/trans isomerization about the NMe-Leu(7)-Pro(8) and Pro(8)-Pyr amide bonds of the molecule's side chain. Two major conformations account for 47% and 33% of the total population, a ratio of 60:40 between the two. They correspond to the cis- and trans-isomers, respectively, about the Pro(8)-Pyr amide bond. Two minor conformers arise as a consequence of similar isomerism about the Pro(8)-Pyr amide bond, but in structures in which the NMe-Leu(7)-Pro(8) amide bond is cis rather than trans. These account for approximately 13% and 7% of the total population, corresponding to a ratio of 65:35 cis/trans, respectively. Molecular dynamics simulations show that the three-dimensional structures of all four conformational isomers are similar in the macrocycle and that all are essentially unchanged with respect to the macrocycle of didemnin B. Significant differences in the conformation of the molecule's side chain are, however, observed between major and minor pairs. Analysis of hydrogen-bonding patterns shows that each major conformer exhibits a beta-turn like structure and is stabilized by hydrogen bonding between a different carbonyl group of the pyruvyl unit of the molecule's side chain and the NH of the Thr(6) residue. The minor isomers have a cis-amide bond between the NMe-Leu(7) and Pro(8) residues that obliges the side chain to adopt an extended disposition where hydrogen bonding to the macrocycle is absent. These results suggest that the ability of the molecule's side chain to adopt a beta-turn-like conformation may not be a prerequisite for biological activity in the didemnins and that conformations having an extended side-chain may play a role in the biological activity of aplidine.